[Sat Jun 15 02:27:09 2013] Detection parameters:
  Position = (291.9, 261.0) = 8 48 48.46 -45 39 33.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 345.6 +/- 38.1
  Background counts = 488.6
  Rate = 0.009 +/- 0.001

[Sat Jun 15 02:27:10 2013] Off-axis axis estimate = 2.75'
[Sat Jun 15 02:27:43 2013] Using EEF radius (= 7.80 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 02:27:43 2013] Initial guess for spatial extent in simple fitting = 7.80"
[Sat Jun 15 02:27:43 2013] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.760
[Sat Jun 15 02:27:43 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 7.80"
[Sat Jun 15 02:27:44 2013] fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_src9.ximg exists
[Sat Jun 15 02:27:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_src9.csv
[Sat Jun 15 02:27:44 2013] fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_src9_1.ximg exists
[Sat Jun 15 02:27:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_src9.csv
[Sat Jun 15 02:27:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 02:27:47 2013] fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sat Jun 15 02:27:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sat Jun 15 02:27:47 2013] fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sat Jun 15 02:27:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sat Jun 15 02:27:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 02:28:19 2013] Warning, spatial fit 9 centroid is now closest to src. 71
[Sat Jun 15 02:28:20 2013] Spatial fit model total counts = 6409.250000, observed total counts = 6377.000000
[Sat Jun 15 02:28:20 2013] Offset between fit and detection position for source 72 = 0.359782 pixels
[Sat Jun 15 02:28:20 2013] Warning, changing simple spatial fit ID from 9 to 50
[Sat Jun 15 02:28:20 2013] 6343.893000 total counts/ 6055.970000 bgd. counts: snr = 3.699853
Spatial fit parameters:
  Offset between fit and detection position for source 72 = 0.359782 pixels
  Position = (291.6, 260.8) = 8 48 48.58 -45 39 35.3
  Extent = 16.0 (15.8-16.0)", rotation angle = 0
  Source counts = 287.9 +/- 79.6
  Background counts = 6056.0
  Rate = 0.007 +/- 0.002
[Sat Jun 15 02:28:20 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 02:28:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 02:28:20 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 02:28:20 2013] Source does appear to be extended
[Sat Jun 15 02:28:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 02:28:20 2013] Source is confused with source 6
[Sat Jun 15 02:28:35 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 15 02:28:35 2013] Initial guess for spatial extent in simple fitting = 16.01"
[Sat Jun 15 02:28:35 2013] source mask rpix=3.7, npix_max = 69, mask sum = 53, frac = 0.758
[Sat Jun 15 02:28:35 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 16.01"
[Sat Jun 15 02:28:36 2013] fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_src11.ximg exists
[Sat Jun 15 02:28:36 2013] fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_src11_1.ximg exists
[Sat Jun 15 02:28:36 2013] Fit fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_src11 appears to have run properly
[Sat Jun 15 02:28:38 2013] fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sat Jun 15 02:28:38 2013] fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sat Jun 15 02:28:38 2013] Fit fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sat Jun 15 02:29:05 2013] Warning, spatial fit 11 centroid is now closest to src. 70
[Sat Jun 15 02:29:05 2013] Spatial fit model total counts = 6399.060000, observed total counts = 6377.000000
[Sat Jun 15 02:29:05 2013] Offset between fit and detection position for source 72 = 0.082253 pixels
[Sat Jun 15 02:29:05 2013] Warning, changing simple spatial fit ID from 11 to 48
[Sat Jun 15 02:29:05 2013] 6348.003000 total counts/ 6012.000000 bgd. counts: snr = 4.333449
Spatial fit parameters:
  Offset between fit and detection position for source 72 = 0.082253 pixels
  Position = (291.6, 260.7) = 8 48 48.58 -45 39 35.6
  Extent = 16.0 (16.0-32.0)", rotation angle = 0
  Source counts = 336.0 +/- 79.7
  Background counts = 6012.0
  Rate = 0.008 +/- 0.002
[Sat Jun 15 02:29:05 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 02:29:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 02:29:05 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 02:29:05 2013] Source does appear to be extended
[Sat Jun 15 02:29:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 02:33:40 2013] XMMSAS src. selection expression = ellipse(25324.240000, 22635.008000, 960.390028, 960.390028, 0.000000, X, Y)
[Sat Jun 15 02:33:40 2013] Writing source region out to fullrun_mos2_xmm0412990601_pi300-10000_pass1_cl_src72_src.reg
[Sat Jun 15 02:33:40 2013] Extracting stamp from image fullrun_mos2_xmm0412990601_pi300-10000_cl_sm2.00.img.gz, (236, 206) - (347, 316)
[Sat Jun 15 02:33:40 2013] XMMSAS bgd. selection expression = annulus(25324.240000, 22635.008000, 1600.650046, 3201.300092, X, Y) && !ellipse(28087.240000, 22760.832000, 1294.496037, 1294.496037, 0.000000, X, Y) && !ellipse(24533.702057, 24412.024719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24877.005310, 23105.641449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24607.636658, 23163.433472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25050.518000, 22697.782000, 1370.472039, 1370.472039, 311.442000, X, Y) && !ellipse(24109.024000, 24578.270000, 1186.904034, 1186.904034, 0.000000, X, Y) && !ellipse(22978.058000, 25796.722000, 1196.408034, 1196.408034, 0.000000, X, Y) && !ellipse(24835.980000, 24080.306000, 1223.176035, 1223.176035, 0.000000, X, Y) && !ellipse(22405.100000, 26104.362000, 2446.352070, 2446.352070, 0.000000, X, Y) && !ellipse(23313.562000, 25472.306000, 1223.176035, 1223.176035, 0.000000, X, Y) && !ellipse(23421.982000, 25359.412000, 646.009619, 646.009619, 0.000000, X, Y) && !ellipse(24877.592072, 23527.865448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26441.250000, 22135.512000, 2597.696075, 2597.696075, 0.000000, X, Y) && !ellipse(22137.616000, 26304.102000, 1267.704036, 1267.704036, 0.000000, X, Y) && !ellipse(28312.546000, 20957.334000, 2436.272070, 811.616023, 59.280000, X, Y) && !ellipse(19522.796000, 27515.438000, 2902.240084, 2902.240084, 0.000000, X, Y) && !ellipse(20668.736000, 27231.832000, 2698.080078, 2698.080078, 0.000000, X, Y) && !ellipse(21607.478000, 26702.134000, 1349.040039, 1349.040039, 0.000000, X, Y) && !ellipse(28480.062000, 20235.962000, 1487.224043, 1487.224043, 0.000000, X, Y) && !ellipse(26241.074402, 23274.517242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27185.306000, 21572.338000, 2588.992074, 2588.992074, 0.000000, X, Y) && !ellipse(26649.853600, 23148.030000, 1238.896036, 1238.896036, 0.000000, X, Y) && !ellipse(26642.236000, 21933.692000, 1239.344036, 1239.344036, 0.000000, X, Y) && !ellipse(25965.556702, 22136.576996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25731.634000, 24016.848600, 899.192026, 899.192026, 0.000000, X, Y)
[Sat Jun 15 02:33:40 2013] Writing fullrun_mos2_xmm0412990601_pi300-10000_pass1_cl_src72.gif
[Sat Jun 15 02:42:06 2013] Mean detx,y = (-127.48, 1406.25) 
[Sat Jun 15 02:42:08 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 02:42:30 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 02:42:30 2013] Setting source spectrum file to fullrun_mos2_xmm0412990601_pi300-10000_pass1_cl_src72_src_b10.pi.gz
[Sat Jun 15 02:42:30 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0412990601_pi300-10000_pass1_cl_src72_bgd.pi.gz
[Sat Jun 15 04:10:39 2013] Updating aperture counts using extracted products
[Sat Jun 15 04:10:39 2013] Total counts from fullrun_mos2_xmm0412990601_pi300-10000_pass1_cl_src72_src_b10.pi.gz = 9132.00
[Sat Jun 15 04:10:39 2013] Total counts from fullrun_mos2_xmm0412990601_pi300-10000_pass1_cl_src72_bgd.pi.gz = 20258.00
[Sat Jun 15 04:10:39 2013] Got source and background scale factors 2611516.000000, 8516572.000000
[Sat Jun 15 04:10:40 2013] User source parameters:
  Position = (291.6, 260.7) = 8 48 48.58 -45 39 35.6
  Extent = 16.0 (16.0-32.0)", rotation angle = 0
  Source aperture counts = 2920.1 +/- 96.6
  Background aperture counts = 6211.9
  Rate = 0.07 +/- 0.002

[Sat Jun 15 04:10:51 2013] No arf file for this source, not re-computing flux
[Sat Jun 15 04:10:53 2013] Flag c found in src. 72 procflags, skipping spectral fitting
[Sat Jun 15 04:10:53 2013] Source 72 has no response, skipping
[Sat Jun 15 04:10:54 2013] xmm0412990601/analysis//spectral/fullrun_mos2_xmm0412990601_pi300-10000_pass1_cl_src72_pl.csv not found, spectral fit skipped or did not complete