[Sat Jun 15 02:27:09 2013] Detection parameters:
  Position = (285.4, 258.8) = 8 48 51.16 -45 39 41.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 309.8 +/- 28.9
  Background counts = 503.7
  Rate = 0.01 +/- 0.001

[Sat Jun 15 02:27:10 2013] Off-axis axis estimate = 3.03'
[Sat Jun 15 02:27:43 2013] Using EEF radius (= 7.94 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 02:27:43 2013] Initial guess for spatial extent in simple fitting = 7.94"
[Sat Jun 15 02:27:43 2013] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.739
[Sat Jun 15 02:27:43 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 7.94"
[Sat Jun 15 02:27:44 2013] fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_src4.ximg exists
[Sat Jun 15 02:27:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_src4.csv
[Sat Jun 15 02:27:44 2013] fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_src4_1.ximg exists
[Sat Jun 15 02:27:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_src4.csv
[Sat Jun 15 02:27:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 02:27:46 2013] fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sat Jun 15 02:27:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sat Jun 15 02:27:46 2013] fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sat Jun 15 02:27:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sat Jun 15 02:27:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 02:28:19 2013] Source 70 is offset by -3.379471 and 3.872411 pixels which is larger than
2 X fitted extent = 1.021338 x 1.021338, not incorporating fit results
[Sat Jun 15 02:28:20 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 02:28:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 02:28:20 2013] Assessing source extent using major
[Sat Jun 15 02:28:20 2013] Source does appear to be extended
[Sat Jun 15 02:28:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 02:28:20 2013] Source is confused with source 6
[Sat Jun 15 02:28:35 2013] Using EEF radius (= 7.94 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 02:28:35 2013] Initial guess for spatial extent in simple fitting = 7.94"
[Sat Jun 15 02:28:35 2013] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.739
[Sat Jun 15 02:28:35 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 7.94"
[Sat Jun 15 02:28:36 2013] fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_src4.ximg exists
[Sat Jun 15 02:28:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_src4.csv
[Sat Jun 15 02:28:36 2013] fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_src4_1.ximg exists
[Sat Jun 15 02:28:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_src4.csv
[Sat Jun 15 02:28:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 02:28:37 2013] fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sat Jun 15 02:28:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sat Jun 15 02:28:37 2013] fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sat Jun 15 02:28:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sat Jun 15 02:28:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 02:29:05 2013] Spatial fit model total counts = 6780.740000, observed total counts = 5920.000000
[Sat Jun 15 02:29:05 2013] Poor agreement between spatial fit and data for source 70
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 15 02:29:05 2013] Spatial fit model total counts = 12630.700000, observed total counts = 11522.000000
[Sat Jun 15 02:29:05 2013] Offset between fit and detection position for source 70 = 4.084220 pixels
[Sat Jun 15 02:29:05 2013] Warning, changing simple spatial fit ID from 4 to 11
[Sat Jun 15 02:29:05 2013] 12505.330000 total counts/ 11964.400000 bgd. counts: snr = 4.945334
Spatial fit parameters:
  Offset between fit and detection position for source 70 = 4.084220 pixels
  Position = (288.5, 261.5) = 8 48 49.89 -45 39 32.5
  Extent = 17.1" x 17.1", rotation angle = 311
  Source counts = 540.9 +/- 111.8
  Background counts = 11964.4
  Rate = 0.01 +/- 0.003
[Sat Jun 15 02:29:05 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 02:29:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 02:29:05 2013] Assessing source extent using major
[Sat Jun 15 02:29:05 2013] Source does appear to be extended
[Sat Jun 15 02:29:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 02:33:39 2013] XMMSAS src. selection expression = ellipse(25050.518000, 22697.782000, 1027.854030, 1027.854030, 311.442000, X, Y)
[Sat Jun 15 02:33:39 2013] Writing source region out to fullrun_mos2_xmm0412990601_pi300-10000_pass1_cl_src70_src.reg
[Sat Jun 15 02:33:39 2013] Extracting stamp from image fullrun_mos2_xmm0412990601_pi300-10000_cl_sm2.00.img.gz, (229, 202) - (348, 321)
[Sat Jun 15 02:33:39 2013] XMMSAS bgd. selection expression = annulus(25050.518000, 22697.782000, 1713.090049, 3426.180099, X, Y) && !ellipse(28087.240000, 22760.832000, 1294.496037, 1294.496037, 0.000000, X, Y) && !ellipse(24533.702057, 24412.024719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24877.005310, 23105.641449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24607.636658, 23163.433472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24109.024000, 24578.270000, 1186.904034, 1186.904034, 0.000000, X, Y) && !ellipse(22978.058000, 25796.722000, 1196.408034, 1196.408034, 0.000000, X, Y) && !ellipse(24835.980000, 24080.306000, 1223.176035, 1223.176035, 0.000000, X, Y) && !ellipse(25324.240000, 22635.008000, 1280.520037, 1280.520037, 0.000000, X, Y) && !ellipse(22405.100000, 26104.362000, 2446.352070, 2446.352070, 0.000000, X, Y) && !ellipse(23313.562000, 25472.306000, 1223.176035, 1223.176035, 0.000000, X, Y) && !ellipse(20788.937225, 26058.811951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23421.982000, 25359.412000, 646.009619, 646.009619, 0.000000, X, Y) && !ellipse(24877.592072, 23527.865448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26441.250000, 22135.512000, 2597.696075, 2597.696075, 0.000000, X, Y) && !ellipse(21394.734800, 26005.050000, 606.560817, 606.560817, 0.000000, X, Y) && !ellipse(19069.414000, 27964.780000, 2827.952081, 2827.952081, 0.000000, X, Y) && !ellipse(22137.616000, 26304.102000, 1267.704036, 1267.704036, 0.000000, X, Y) && !ellipse(28312.546000, 20957.334000, 2436.272070, 811.616023, 59.280000, X, Y) && !ellipse(21195.776657, 26827.254425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19522.796000, 27515.438000, 2902.240084, 2902.240084, 0.000000, X, Y) && !ellipse(20668.736000, 27231.832000, 2698.080078, 2698.080078, 0.000000, X, Y) && !ellipse(21607.478000, 26702.134000, 1349.040039, 1349.040039, 0.000000, X, Y) && !ellipse(28480.062000, 20235.962000, 1487.224043, 1487.224043, 0.000000, X, Y) && !ellipse(26241.074402, 23274.517242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27185.306000, 21572.338000, 2588.992074, 2588.992074, 0.000000, X, Y) && !ellipse(26649.853600, 23148.030000, 1238.896036, 1238.896036, 0.000000, X, Y) && !ellipse(26642.236000, 21933.692000, 1239.344036, 1239.344036, 0.000000, X, Y) && !ellipse(25965.556702, 22136.576996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25731.634000, 24016.848600, 899.192026, 899.192026, 0.000000, X, Y)
[Sat Jun 15 02:33:39 2013] Writing fullrun_mos2_xmm0412990601_pi300-10000_pass1_cl_src70.gif
[Sat Jun 15 02:36:57 2013] Mean detx,y = (-385.13, 1279.72) 
[Sat Jun 15 02:37:00 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 02:37:14 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 02:37:14 2013] Setting source spectrum file to fullrun_mos2_xmm0412990601_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Sat Jun 15 02:37:14 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0412990601_pi300-10000_pass1_cl_src70_bgd.pi.gz
[Sat Jun 15 04:10:37 2013] Updating aperture counts using extracted products
[Sat Jun 15 04:10:37 2013] Total counts from fullrun_mos2_xmm0412990601_pi300-10000_pass1_cl_src70_src_b10.pi.gz = 10578.00
[Sat Jun 15 04:10:37 2013] Total counts from fullrun_mos2_xmm0412990601_pi300-10000_pass1_cl_src70_bgd.pi.gz = 25298.00
[Sat Jun 15 04:10:37 2013] Got source and background scale factors 2983620.000000, 10861212.000000
[Sat Jun 15 04:10:37 2013] User source parameters:
  Position = (288.5, 261.5) = 8 48 49.89 -45 39 32.5
  Extent = 17.1" x 17.1", rotation angle = 311
  Source aperture counts = 3628.5 +/- 103.9
  Background aperture counts = 6949.5
  Rate = 0.09 +/- 0.003

[Sat Jun 15 04:10:51 2013] No arf file for this source, not re-computing flux
[Sat Jun 15 04:10:53 2013] Flag b found in src. 70 procflags, skipping spectral fitting
[Sat Jun 15 04:10:53 2013] Flag p found in src. 70 procflags, skipping spectral fitting
[Sat Jun 15 04:10:53 2013] Flag c found in src. 70 procflags, skipping spectral fitting
[Sat Jun 15 04:10:53 2013] Source 70 has no response, skipping
[Sat Jun 15 04:10:54 2013] xmm0412990601/analysis//spectral/fullrun_mos2_xmm0412990601_pi300-10000_pass1_cl_src70_pl.csv not found, spectral fit skipped or did not complete