[Sat Jun 15 02:27:06 2013] Detection parameters:
  Position = (226.2, 296.9) = 8 49 15.70 -45 36 55.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 147.9 +/- 29.4
  Background counts = 391.0
  Rate = 0.004 +/- 0.0008

[Sat Jun 15 02:27:10 2013] Off-axis axis estimate = 5.24'
[Sat Jun 15 02:27:43 2013] Using EEF radius (= 9.05 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 02:27:43 2013] Initial guess for spatial extent in simple fitting = 9.05"
[Sat Jun 15 02:27:43 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.939
[Sat Jun 15 02:27:43 2013] Giving source the simple spatial ID 49 for pass 0, mean size = 9.05"
[Sat Jun 15 02:27:46 2013] fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_src49.ximg exists
[Sat Jun 15 02:27:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_src49.csv
[Sat Jun 15 02:27:46 2013] fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_src49_1.ximg exists
[Sat Jun 15 02:27:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_src49.csv
[Sat Jun 15 02:27:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 02:27:48 2013] fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Sat Jun 15 02:27:48 2013] fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Sat Jun 15 02:27:48 2013] Fit fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_tfrozen_src49 appears to have run properly
[Sat Jun 15 02:28:20 2013] Source 50 is offset by 1.349242 and 0.189974 pixels which is larger than
2 X fitted extent = 1.049812 x 1.049812, not incorporating fit results
[Sat Jun 15 02:28:20 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 02:28:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 02:28:20 2013] Assessing source extent using major
[Sat Jun 15 02:28:20 2013] Source does appear to be extended
[Sat Jun 15 02:28:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 02:28:35 2013] Using EEF radius (= 9.05 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 02:28:35 2013] Initial guess for spatial extent in simple fitting = 9.05"
[Sat Jun 15 02:28:35 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.939
[Sat Jun 15 02:28:35 2013] Giving source the simple spatial ID 47 for pass 1, mean size = 9.05"
[Sat Jun 15 02:28:37 2013] fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_src47.ximg exists
[Sat Jun 15 02:28:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_src47.csv
[Sat Jun 15 02:28:37 2013] fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_src47_1.ximg exists
[Sat Jun 15 02:28:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_src47.csv
[Sat Jun 15 02:28:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 02:28:39 2013] fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_tfrozen_src47.ximg exists
[Sat Jun 15 02:28:39 2013] fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists
[Sat Jun 15 02:28:39 2013] Fit fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_tfrozen_src47 appears to have run properly
[Sat Jun 15 02:29:05 2013] Warning, spatial fit 47 centroid is now closest to src. 39
[Sat Jun 15 02:29:05 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 02:29:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 02:29:05 2013] Assessing source extent using major
[Sat Jun 15 02:29:05 2013] Source does appear to be extended
[Sat Jun 15 02:29:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 02:29:05 2013] Source is confused with source 23
[Sat Jun 15 02:29:05 2013] Source is confused with source 25
[Sat Jun 15 02:33:41 2013] XMMSAS src. selection expression = ellipse(19631.586060, 25780.076355, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 02:33:41 2013] Writing source region out to fullrun_mos2_xmm0412990601_pi300-10000_pass1_cl_src50_src.reg
[Sat Jun 15 02:33:41 2013] Extracting stamp from image fullrun_mos2_xmm0412990601_pi300-10000_cl_sm2.00.img.gz, (189, 259) - (264, 334)
[Sat Jun 15 02:33:41 2013] XMMSAS bgd. selection expression = annulus(19631.586060, 25780.076355, 1087.500000, 2175.000000, X, Y) && !ellipse(17535.468307, 27884.333099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18166.528000, 26172.310000, 1304.016038, 1304.016038, 0.000000, X, Y) && !ellipse(22978.058000, 25796.722000, 1196.408034, 1196.408034, 0.000000, X, Y) && !ellipse(20152.944000, 27092.670000, 1451.120042, 1451.120042, 0.000000, X, Y) && !ellipse(22405.100000, 26104.362000, 2446.352070, 2446.352070, 0.000000, X, Y) && !ellipse(16733.334000, 28178.330000, 1214.336035, 1214.336035, 0.000000, X, Y) && !ellipse(19847.440000, 27294.685000, 1413.976041, 1413.976041, 0.000000, X, Y) && !ellipse(18141.426971, 24370.988586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18631.590000, 28156.701200, 1508.280043, 1508.280043, 0.000000, X, Y) && !ellipse(20788.937225, 26058.811951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16792.604000, 25947.250000, 1659.208048, 1659.208048, 0.000000, X, Y) && !ellipse(17066.835910, 25177.936200, 1373.512040, 926.332225, 174.771567, X, Y) && !ellipse(17779.523911, 26771.472260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21394.734800, 26005.050000, 606.560817, 606.560817, 0.000000, X, Y) && !ellipse(19069.414000, 27964.780000, 2827.952081, 2827.952081, 0.000000, X, Y) && !ellipse(19219.099380, 26752.069305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22137.616000, 26304.102000, 1267.704036, 1267.704036, 0.000000, X, Y) && !ellipse(20471.008087, 26565.784485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21195.776657, 26827.254425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19522.796000, 27515.438000, 2902.240084, 2902.240084, 0.000000, X, Y) && !ellipse(20668.736000, 27231.832000, 2698.080078, 2698.080078, 0.000000, X, Y) && !ellipse(17422.017578, 25174.833221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21607.478000, 26702.134000, 1349.040039, 1349.040039, 0.000000, X, Y)
[Sat Jun 15 02:33:41 2013] Writing fullrun_mos2_xmm0412990601_pi300-10000_pass1_cl_src50.gif
[Sat Jun 15 03:59:50 2013] Mean detx,y = (-4945.14, -2952.55) 
[Sat Jun 15 03:59:52 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 04:00:02 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 04:00:02 2013] Setting source spectrum file to fullrun_mos2_xmm0412990601_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Sat Jun 15 04:00:02 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0412990601_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Sat Jun 15 04:06:08 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 15 04:06:08 2013] rmf not generated due to insufficient counts
[Sat Jun 15 04:10:47 2013] Updating aperture counts using extracted products
[Sat Jun 15 04:10:48 2013] Total counts from fullrun_mos2_xmm0412990601_pi300-10000_pass1_cl_src50_src_b10.pi.gz = 3381.00
[Sat Jun 15 04:10:48 2013] Total counts from fullrun_mos2_xmm0412990601_pi300-10000_pass1_cl_src50_bgd.pi.gz = 3744.00
[Sat Jun 15 04:10:48 2013] Got source and background scale factors 1336000.000000, 1668800.000000
[Sat Jun 15 04:10:48 2013] User source parameters:
  Position = (226.2, 296.9) = 8 49 15.70 -45 36 55.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 383.6 +/- 59.2
  Background aperture counts = 2997.4
  Rate = 0.009 +/- 0.001

[Sat Jun 15 04:10:48 2013] Updating counts from extracted products
[Sat Jun 15 04:10:48 2013] Set source signif. to 383.65/54.75 = 7.01
[Sat Jun 15 04:10:51 2013] No arf file for this source, not re-computing flux
[Sat Jun 15 04:10:53 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 15 04:10:54 2013] xmm0412990601/analysis//spectral/fullrun_mos2_xmm0412990601_pi300-10000_pass1_cl_src50_pl.csv not found, spectral fit skipped or did not complete