[Sat Jun 15 02:27:02 2013] Detection parameters:
  Position = (129.3, 348.7) = 8 49 55.82 -45 33 10.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 134.8 +/- 24.2
  Background counts = 153.5
  Rate = 0.003 +/- 0.0006

[Sat Jun 15 02:27:10 2013] Off-axis axis estimate = 12.80'
[Sat Jun 15 02:27:43 2013] Using EEF radius (= 12.83 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 02:27:43 2013] Initial guess for spatial extent in simple fitting = 12.83"
[Sat Jun 15 02:27:43 2013] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.030
[Sat Jun 15 02:27:43 2013] Giving source the simple spatial ID 55 for pass 0, mean size = 12.83"
[Sat Jun 15 02:27:46 2013] fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_src55.ximg exists
[Sat Jun 15 02:27:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_src55.csv
[Sat Jun 15 02:27:46 2013] fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_src55_1.ximg exists
[Sat Jun 15 02:27:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_src55.csv
[Sat Jun 15 02:27:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 02:27:49 2013] fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Sat Jun 15 02:27:49 2013] fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Sat Jun 15 02:27:49 2013] Fit fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_tfrozen_src55 appears to have run properly
[Sat Jun 15 02:28:20 2013] Source 17 is offset by -4.262194 and 3.976261 pixels which is larger than
2 X fitted extent = 1.582106 x 1.582106, not incorporating fit results
[Sat Jun 15 02:28:20 2013] Warning, spatial fit 55 centroid is now closest to src. 20
[Sat Jun 15 02:28:20 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 02:28:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 02:28:20 2013] Assessing source extent using major
[Sat Jun 15 02:28:20 2013] Source does appear to be extended
[Sat Jun 15 02:28:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 02:28:35 2013] Using EEF radius (= 12.83 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 02:28:35 2013] Initial guess for spatial extent in simple fitting = 12.83"
[Sat Jun 15 02:28:35 2013] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.030
[Sat Jun 15 02:28:35 2013] Giving source the simple spatial ID 53 for pass 1, mean size = 12.83"
[Sat Jun 15 02:28:37 2013] fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_src53.ximg exists
[Sat Jun 15 02:28:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_src53.csv
[Sat Jun 15 02:28:37 2013] fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_src53_1.ximg exists
[Sat Jun 15 02:28:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_src53.csv
[Sat Jun 15 02:28:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 02:28:39 2013] fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Sat Jun 15 02:28:39 2013] fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Sat Jun 15 02:28:39 2013] Fit fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_tfrozen_src53 appears to have run properly
[Sat Jun 15 02:29:05 2013] Warning, spatial fit 53 centroid is now closest to src. 16
[Sat Jun 15 02:29:05 2013] Spatial fit model total counts = 4306.470000, observed total counts = 3264.000000
[Sat Jun 15 02:29:05 2013] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 15 02:29:05 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 02:29:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 02:29:05 2013] Assessing source extent using major
[Sat Jun 15 02:29:05 2013] Source does appear to be extended
[Sat Jun 15 02:29:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 02:29:05 2013] Source is confused with source 16
[Sat Jun 15 02:33:42 2013] XMMSAS src. selection expression = ellipse(11198.115158, 30291.666748, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 02:33:42 2013] Writing source region out to fullrun_mos2_xmm0412990601_pi300-10000_pass1_cl_src17_src.reg
[Sat Jun 15 02:33:42 2013] Extracting stamp from image fullrun_mos2_xmm0412990601_pi300-10000_cl_sm2.00.img.gz, (92, 311) - (167, 386)
[Sat Jun 15 02:33:42 2013] XMMSAS bgd. selection expression = annulus(11198.115158, 30291.666748, 1087.500000, 2175.000000, X, Y) && !ellipse(11071.177544, 32065.005951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10655.273178, 28847.057343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11108.722977, 28230.309967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10398.764000, 30735.098000, 2052.184059, 2052.184059, 0.000000, X, Y) && !ellipse(10878.160000, 26827.186200, 2045.520059, 456.636013, 323.879000, X, Y)
[Sat Jun 15 02:33:42 2013] Writing fullrun_mos2_xmm0412990601_pi300-10000_pass1_cl_src17.gif
[Sat Jun 15 04:01:31 2013] Mean detx,y = (-12096.42, -9285.77) 
[Sat Jun 15 04:01:32 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 04:01:40 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 04:01:40 2013] Setting source spectrum file to fullrun_mos2_xmm0412990601_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sat Jun 15 04:01:40 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0412990601_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sat Jun 15 04:06:09 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 15 04:06:09 2013] rmf not generated due to insufficient counts
[Sat Jun 15 04:10:49 2013] Updating aperture counts using extracted products
[Sat Jun 15 04:10:49 2013] Total counts from fullrun_mos2_xmm0412990601_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 1528.00
[Sat Jun 15 04:10:49 2013] Total counts from fullrun_mos2_xmm0412990601_pi300-10000_pass1_cl_src17_bgd.pi.gz = 4682.00
[Sat Jun 15 04:10:49 2013] Got source and background scale factors 1339200.000000, 3469590.000000
[Sat Jun 15 04:10:50 2013] User source parameters:
  Position = (129.3, 348.7) = 8 49 55.82 -45 33 10.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -279.2 +/- 40.1
  Background aperture counts = 1807.2
  Rate = -0.007 +/- 0.001

[Sat Jun 15 04:10:50 2013] Updating counts from extracted products
[Sat Jun 15 04:10:50 2013] Set source signif. to -279.17/42.51 = -6.57
[Sat Jun 15 04:10:51 2013] No arf file for this source, not re-computing flux
[Sat Jun 15 04:10:53 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 15 04:10:54 2013] xmm0412990601/analysis//spectral/fullrun_mos2_xmm0412990601_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete