[Sat Jun 15 02:27:02 2013] Detection parameters:
  Position = (437.7, 381.5) = 8 47 48.11 -45 30 46.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 106.6 +/- 22.0
  Background counts = 157.6
  Rate = 0.003 +/- 0.0005

[Sat Jun 15 02:27:10 2013] Off-axis axis estimate = 11.76'
[Sat Jun 15 02:27:43 2013] Using EEF radius (= 12.31 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 02:27:43 2013] Initial guess for spatial extent in simple fitting = 12.31"
[Sat Jun 15 02:27:43 2013] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.105
[Sat Jun 15 02:27:43 2013] Giving source the simple spatial ID 64 for pass 0, mean size = 12.31"
[Sat Jun 15 02:27:46 2013] fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_src64.ximg exists
[Sat Jun 15 02:27:46 2013] fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_src64_1.ximg exists
[Sat Jun 15 02:27:46 2013] Fit fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_src64 appears to have run properly
[Sat Jun 15 02:27:49 2013] fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_tfrozen_src64.ximg exists
[Sat Jun 15 02:27:49 2013] fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_tfrozen_src64_1.ximg exists
[Sat Jun 15 02:27:49 2013] Fit fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_tfrozen_src64 appears to have run properly
[Sat Jun 15 02:28:20 2013] Source 10 is offset by -2.747506 and 5.766582 pixels which is larger than
2 X fitted extent = 1.434359 x 1.434359, not incorporating fit results
[Sat Jun 15 02:28:20 2013] Spatial fit model total counts = 1902.320000, observed total counts = 1899.000000
[Sat Jun 15 02:28:20 2013] Offset between fit and detection position for source 10 = 4.147520 pixels
[Sat Jun 15 02:28:20 2013] 1861.063000 total counts/ 1284.420000 bgd. counts: snr = 16.089906
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 4.147520 pixels
  Position = (433.6, 381.1) = 8 47 49.82 -45 30 51.3
  Extent = 24.6 (24.6-49.2)", rotation angle = 0
  Source counts = 576.6 +/- 43.1
  Background counts = 1284.4
  Rate = 0.01 +/- 0.001
[Sat Jun 15 02:28:20 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 02:28:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 02:28:20 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 02:28:20 2013] Source does appear to be extended
[Sat Jun 15 02:28:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 02:28:35 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 15 02:28:35 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 15 02:28:35 2013] Initial guess for spatial extent in simple fitting = 24.62"
[Sat Jun 15 02:28:35 2013] source mask rpix=5.7, npix_max = 151, mask sum = 156, frac = 1.028
[Sat Jun 15 02:28:35 2013] Giving source the simple spatial ID 61 for pass 1, mean size = 24.62"
[Sat Jun 15 02:28:37 2013] fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_src61.ximg exists
[Sat Jun 15 02:28:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_src61.csv
[Sat Jun 15 02:28:37 2013] fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_src61_1.ximg exists
[Sat Jun 15 02:28:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_src61.csv
[Sat Jun 15 02:28:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 02:28:39 2013] fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_tfrozen_src61.ximg exists
[Sat Jun 15 02:28:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_tfrozen_src61.csv
[Sat Jun 15 02:28:39 2013] fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_tfrozen_src61_1.ximg exists
[Sat Jun 15 02:28:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_tfrozen_src61.csv
[Sat Jun 15 02:28:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_tfrozen_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_tfrozen_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 02:29:05 2013] Warning, spatial fit 61 centroid is now closest to src. 4
[Sat Jun 15 02:29:05 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 02:29:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 02:29:05 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 02:29:05 2013] Source does appear to be extended
[Sat Jun 15 02:29:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 02:33:42 2013] XMMSAS src. selection expression = ellipse(37676.184000, 33103.573000, 1476.990042, 1476.990042, 0.000000, X, Y)
[Sat Jun 15 02:33:42 2013] Writing source region out to fullrun_mos2_xmm0412990601_pi300-10000_pass1_cl_src10_src.reg
[Sat Jun 15 02:33:42 2013] Extracting stamp from image fullrun_mos2_xmm0412990601_pi300-10000_cl_sm2.00.img.gz, (349, 296) - (519, 466)
[Sat Jun 15 02:33:42 2013] XMMSAS bgd. selection expression = annulus(37676.184000, 33103.573000, 2461.650071, 4923.300142, X, Y)
[Sat Jun 15 02:33:42 2013] Writing fullrun_mos2_xmm0412990601_pi300-10000_pass1_cl_src10.gif
[Sat Jun 15 04:04:49 2013] Mean detx,y = (14189.07, -5579.34) 
[Sat Jun 15 04:04:50 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 04:05:29 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 04:05:29 2013] Setting source spectrum file to fullrun_mos2_xmm0412990601_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sat Jun 15 04:05:29 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0412990601_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sat Jun 15 04:10:51 2013] Updating aperture counts using extracted products
[Sat Jun 15 04:10:51 2013] Total counts from fullrun_mos2_xmm0412990601_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 5602.00
[Sat Jun 15 04:10:51 2013] Total counts from fullrun_mos2_xmm0412990601_pi300-10000_pass1_cl_src10_bgd.pi.gz = 37156.00
[Sat Jun 15 04:10:51 2013] Got source and background scale factors 5967211.000000, 31057155.000000
[Sat Jun 15 04:10:51 2013] User source parameters:
  Position = (433.6, 381.1) = 8 47 49.82 -45 30 51.3
  Extent = 24.6 (24.6-49.2)", rotation angle = 0
  Source aperture counts = -1537.0 +/- 75.9
  Background aperture counts = 7139.0
  Rate = -0.04 +/- 0.002

[Sat Jun 15 04:10:51 2013] No arf file for this source, not re-computing flux
[Sat Jun 15 04:10:53 2013] Flag b found in src. 10 procflags, skipping spectral fitting
[Sat Jun 15 04:10:53 2013] Source 10 has no response, skipping
[Sat Jun 15 04:10:54 2013] xmm0412990601/analysis//spectral/fullrun_mos2_xmm0412990601_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete