[Tue May  1 11:53:09 2012] Detection parameters:
  Position = (388.3, 189.9) = 8 48 46.58 -45 39 40.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 529.9 +/- 47.2
  Background counts = 971.2
  Rate = 0.01 +/- 0.0009

[Tue May  1 11:53:12 2012] Off-axis axis estimate = 10.22'
[Tue May  1 12:11:36 2012] Using EEF radius (= 11.54 ")to estimate initial spatial extent for simple fitting
[Tue May  1 12:11:36 2012] Initial guess for spatial extent in simple fitting = 11.54"
[Tue May  1 12:11:36 2012] source mask rpix=2.7, npix_max = 39, mask sum = 34, frac = 0.855
[Tue May  1 12:11:36 2012] Giving source the simple spatial ID 78 for pass 0, mean size = 11.54"
[Wed May  2 01:37:10 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_src78.ximg exists
[Wed May  2 01:37:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_src78.csv
[Wed May  2 01:37:10 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_src78_1.ximg exists
[Wed May  2 01:37:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_src78.csv
[Wed May  2 01:37:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_src78_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 01:37:13 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src78.ximg exists
[Wed May  2 01:37:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src78.csv
[Wed May  2 01:37:13 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src78_1.ximg exists
[Wed May  2 01:37:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src78.csv
[Wed May  2 01:37:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src78_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 17:37:19 2012] Warning, spatial fit 78 centroid is now closest to src. 95
[Wed May  2 17:37:19 2012] Vigneting correction estimate = 1.000000
[Wed May  2 17:37:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 17:37:19 2012] Assessing source extent using major
[Wed May  2 17:37:19 2012] Source does appear to be extended
[Wed May  2 17:37:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 17:37:19 2012] Source is confused with source 88
[Wed May  2 17:38:54 2012] Using EEF radius (= 11.54 ")to estimate initial spatial extent for simple fitting
[Wed May  2 17:38:54 2012] Initial guess for spatial extent in simple fitting = 11.54"
[Wed May  2 17:38:54 2012] source mask rpix=2.7, npix_max = 39, mask sum = 34, frac = 0.855
[Wed May  2 17:38:54 2012] Giving source the simple spatial ID 63 for pass 1, mean size = 11.54"
[Thu May  3 13:40:53 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src63.ximg exists
[Thu May  3 13:40:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src63.csv
[Thu May  3 13:40:53 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src63_1.ximg exists
[Thu May  3 13:40:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src63.csv
[Thu May  3 13:40:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src63_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 13:40:55 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src63.ximg exists
[Thu May  3 13:40:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src63.csv
[Thu May  3 13:40:55 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src63_1.ximg exists
[Thu May  3 13:40:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src63.csv
[Thu May  3 13:40:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src63_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 10:40:45 2012] Warning, spatial fit 63 centroid is now closest to src. 95
[Fri May  4 10:40:45 2012] Vigneting correction estimate = 1.000000
[Fri May  4 10:40:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 10:40:45 2012] Assessing source extent using major
[Fri May  4 10:40:45 2012] Source does appear to be extended
[Fri May  4 10:40:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 10:42:23 2012] XMMSAS src. selection expression = ellipse(33730.712921, 16469.679810, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May  4 10:42:23 2012] Writing source region out to fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src91_src.reg
[Fri May  4 10:42:23 2012] Extracting stamp from image fullrun_pn_xmm0412990501_pi300-10000_cl_sm2.00.img.gz, (351, 152) - (426, 227)
[Fri May  4 10:42:23 2012] XMMSAS bgd. selection expression = annulus(33730.712921, 16469.679810, 1087.500000, 2175.000000, X, Y) && !ellipse(34210.296173, 15621.890457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34471.341309, 15003.653610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36377.718719, 14723.549347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30724.062000, 19864.282000, 1589.664046, 1589.664046, 0.000000, X, Y) && !ellipse(31161.344000, 19467.438000, 1553.624045, 1553.624045, 0.000000, X, Y) && !ellipse(31842.358000, 18653.340000, 3523.552101, 2129.664061, 42.615000, X, Y) && !ellipse(32374.358000, 18618.200000, 1658.096048, 1658.096048, 0.000000, X, Y) && !ellipse(31022.502000, 18946.532000, 1649.840047, 1649.840047, 0.000000, X, Y) && !ellipse(31816.738600, 18215.110580, 1681.920048, 387.652811, 36.718900, X, Y) && !ellipse(32419.732000, 17297.748000, 10672.656307, 10672.656307, 0.000000, X, Y) && !ellipse(32670.494000, 17832.852000, 3316.192095, 3316.192095, 0.000000, X, Y) && !ellipse(34523.762207, 17009.404785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32900.466000, 16636.480000, 1778.776051, 1778.776051, 0.000000, X, Y) && !ellipse(32554.346000, 16583.814000, 1868.824054, 1868.824054, 0.000000, X, Y) && !ellipse(33959.297668, 17272.182327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34705.714020, 16380.190720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35137.350098, 16222.513840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35347.827545, 15531.207932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32990.538544, 16146.905243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35262.548004, 14991.907761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35751.734497, 14580.027756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35408.898529, 14057.312225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37736.492000, 13098.586000, 2278.800066, 2278.800066, 0.000000, X, Y) && !ellipse(30013.134000, 13604.498000, 1907.936055, 1907.936055, 0.000000, X, Y)
[Fri May  4 10:42:23 2012] Writing fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src91.gif
[Fri May  4 16:55:58 2012] Mean detx,y = (-5695.34, -9822.25) 
[Fri May  4 16:56:04 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May  4 16:57:15 2012] Binned source spectrum to 10 counts/bin
[Fri May  4 16:57:16 2012] Setting source spectrum file to fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src91_src_b10.pi.gz
[Fri May  4 16:57:16 2012] Setting bgd. spectrum file to fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src91_bgd.pi.gz
[Sat May  5 02:55:37 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May  5 02:55:37 2012] rmf not generated due to insufficient counts
[Sat May  5 23:27:04 2012] Updating aperture counts using extracted products
[Sat May  5 23:27:04 2012] Error reading totcts from fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src91_src_b10.pi.gz
[Sat May  5 23:27:10 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 23:27:10 2012] Using photon index=1.80, rate=0.00961, arf fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src91.arf
[Sat May  5 23:27:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 23:27:10 2012] Updating source flux to 6.3e-14
[Sat May  5 23:48:09 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting