[Tue May 1 11:53:07 2012] Detection parameters: Position = (366.5, 203.0) = 8 48 55.61 -45 38 47.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 1255.9 +/- 121.3 Background counts = 1114.6 Rate = 0.02 +/- 0.002 [Tue May 1 11:53:12 2012] Off-axis axis estimate = 8.50' [Tue May 1 12:11:36 2012] Using EEF radius (= 10.68 ")to estimate initial spatial extent for simple fitting [Tue May 1 12:11:36 2012] Initial guess for spatial extent in simple fitting = 10.68" [Tue May 1 12:11:36 2012] source mask rpix=2.5, npix_max = 34, mask sum = 24, frac = 0.687 [Tue May 1 12:11:36 2012] Giving source the simple spatial ID 71 for pass 0, mean size = 10.68" [Wed May 2 01:37:10 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_src71.ximg exists [Wed May 2 01:37:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_src71.csv [Wed May 2 01:37:10 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_src71_1.ximg exists [Wed May 2 01:37:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_src71.csv [Wed May 2 01:37:10 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_src71_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 2 01:37:13 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src71.ximg exists [Wed May 2 01:37:13 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src71_1.ximg exists [Wed May 2 01:37:13 2012] Fit fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src71 appears to have run properly [Wed May 2 17:37:19 2012] Warning, spatial fit 71 centroid is now closest to src. 77 [Wed May 2 17:37:19 2012] Source 83 is offset by -2.884390 and -4.813723 pixels which is larger than 2 X fitted extent = 1.257476 x 1.257476, not incorporating fit results [Wed May 2 17:37:19 2012] Source 83 is offset by -4.091661 and -1.338988 pixels which is larger than 2 X fitted extent = 1.297600 x 1.297600, not incorporating fit results [Wed May 2 17:37:19 2012] Vigneting correction estimate = 1.000000 [Wed May 2 17:37:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 2 17:37:19 2012] Assessing source extent using major [Wed May 2 17:37:19 2012] Source does appear to be extended [Wed May 2 17:37:19 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 2 17:37:19 2012] Source is confused with source 75 [Wed May 2 17:38:54 2012] Using EEF radius (= 10.68 ")to estimate initial spatial extent for simple fitting [Wed May 2 17:38:54 2012] Initial guess for spatial extent in simple fitting = 10.68" [Wed May 2 17:38:54 2012] source mask rpix=2.5, npix_max = 34, mask sum = 24, frac = 0.687 [Wed May 2 17:38:54 2012] Giving source the simple spatial ID 57 for pass 1, mean size = 10.68" [Thu May 3 13:40:53 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src57.ximg exists [Thu May 3 13:40:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src57.csv [Thu May 3 13:40:53 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src57_1.ximg exists [Thu May 3 13:40:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src57.csv [Thu May 3 13:40:53 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src57_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 3 13:40:55 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src57.ximg exists [Thu May 3 13:40:55 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src57_1.ximg exists [Thu May 3 13:40:55 2012] Fit fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src57 appears to have run properly [Fri May 4 10:40:45 2012] Warning, spatial fit 57 centroid is now closest to src. 77 [Fri May 4 10:40:45 2012] Spatial fit model total counts = 50210.000000, observed total counts = 46666.000000 [Fri May 4 10:40:45 2012] Offset between fit and detection position for source 83 = 7.608458 pixels [Fri May 4 10:40:45 2012] Warning, changing simple spatial fit ID from 57 to 61 [Fri May 4 10:40:45 2012] 50269.200000 total counts/ 39618.600000 bgd. counts: snr = 53.508714 Spatial fit parameters: Offset between fit and detection position for source 83 = 7.608458 pixels Position = (373.2, 199.4) = 8 48 52.84 -45 39 0.5 Extent = 44.5 (44.4-88.9)", rotation angle = 0 Source counts = 10650.6 +/- 224.2 Background counts = 39618.6 Rate = 0.2 +/- 0.004 [Fri May 4 10:40:45 2012] Vigneting correction estimate = 1.000000 [Fri May 4 10:40:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 4 10:40:45 2012] Assessing source extent using major axis lower bound [Fri May 4 10:40:45 2012] Source does appear to be extended [Fri May 4 10:40:45 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Fri May 4 10:42:22 2012] Counts = 10650.600000, rescaling region sizes by 3.000000 [Fri May 4 10:42:22 2012] XMMSAS src. selection expression = ellipse(32419.732000, 17297.748000, 8004.492230, 8004.492230, 0.000000, X, Y) [Fri May 4 10:42:22 2012] Writing source region out to fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src83_src.reg [Fri May 4 10:42:22 2012] Extracting stamp from image fullrun_pn_xmm0412990501_pi300-10000_cl_sm2.00.img.gz, (0, 0) - (595, 595) [Fri May 4 10:42:22 2012] XMMSAS bgd. selection expression = annulus(32419.732000, 17297.748000, 40022.461152, 80044.922303, X, Y) && !ellipse(34210.296173, 15621.890457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22901.193573, 21129.181885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25311.957520, 22316.715424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37067.434265, 12151.187042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21831.998672, 23802.724701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34471.341309, 15003.653610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36377.718719, 14723.549347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25709.343719, 7336.172600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18806.344543, 34795.682343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17538.290000, 27388.840600, 1614.000046, 1614.000046, 0.000000, X, Y) && !ellipse(16715.692000, 28268.668000, 3228.000093, 3228.000093, 0.000000, X, Y) && !ellipse(26249.363403, 27178.687378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18780.769974, 26820.885010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12532.276000, 26955.724000, 1982.448057, 1982.448057, 0.000000, X, Y) && !ellipse(18167.292000, 26784.498000, 3156.272091, 3156.272091, 0.000000, X, Y) && !ellipse(12794.229828, 26571.099854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23077.649475, 25782.088867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13539.569565, 25911.072845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12023.032200, 25748.354000, 1950.776056, 1950.776056, 0.000000, X, Y) && !ellipse(36883.374359, 25679.647217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35907.321869, 25536.265015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22726.560000, 25268.514000, 1217.968035, 1217.968035, 0.000000, X, Y) && !ellipse(21921.479797, 25099.276398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23653.054400, 25084.854500, 943.416027, 943.416027, 0.000000, X, Y) && !ellipse(11909.446625, 25183.257629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22857.000610, 24661.817841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24434.831421, 7445.231911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20492.294785, 24999.941132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21346.874374, 24644.315887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22389.626000, 24266.150000, 1248.936036, 1248.936036, 0.000000, X, Y) && !ellipse(12011.410370, 24291.555420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20735.557861, 24147.809479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23789.132000, 23129.076000, 1265.464036, 1265.464036, 0.000000, X, Y) && !ellipse(11205.924000, 24243.208000, 1963.584057, 1963.584057, 0.000000, X, Y) && !ellipse(24621.766724, 23236.021973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22738.934113, 24053.170959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25596.677551, 22639.535126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26613.069800, 22362.485000, 1263.224036, 341.316010, 203.709000, X, Y) && !ellipse(27312.923004, 21442.354538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26021.342000, 21787.804400, 1298.488037, 1298.488037, 0.000000, X, Y) && !ellipse(27712.682000, 21282.126000, 1340.992039, 1340.992039, 0.000000, X, Y) && !ellipse(29842.388000, 20560.750732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24281.949524, 20297.998413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12580.237122, 19974.602570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24604.538000, 19802.512000, 1418.584041, 1418.584041, 0.000000, X, Y) && !ellipse(30724.062000, 19864.282000, 1589.664046, 1589.664046, 0.000000, X, Y) && !ellipse(27534.453609, 19556.010522, 868.535645, 416.820606, 119.686026, X, Y) && !ellipse(31161.344000, 19467.438000, 1553.624045, 1553.624045, 0.000000, X, Y) && !ellipse(31842.358000, 18653.340000, 3523.552101, 2129.664061, 42.615000, X, Y) && !ellipse(32374.358000, 18618.200000, 1658.096048, 1658.096048, 0.000000, X, Y) && !ellipse(24692.752000, 19577.382000, 1451.184042, 1451.184042, 0.000000, X, Y) && !ellipse(25703.261047, 18399.611313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31022.502000, 18946.532000, 1649.840047, 1649.840047, 0.000000, X, Y) && !ellipse(31816.738600, 18215.110580, 1681.920048, 387.652811, 36.718900, X, Y) && !ellipse(26038.338000, 17960.288000, 1529.832044, 1016.040029, 244.966000, X, Y) && !ellipse(32670.494000, 17832.852000, 3316.192095, 3316.192095, 0.000000, X, Y) && !ellipse(26245.051636, 17612.588943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34523.762207, 17009.404785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32900.466000, 16636.480000, 1778.776051, 1778.776051, 0.000000, X, Y) && !ellipse(32554.346000, 16583.814000, 1868.824054, 1868.824054, 0.000000, X, Y) && !ellipse(33959.297668, 17272.182327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33730.712921, 16469.679810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34705.714020, 16380.190720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35137.350098, 16222.513840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35347.827545, 15531.207932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32990.538544, 16146.905243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13602.654388, 15460.850983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35262.548004, 14991.907761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35751.734497, 14580.027756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35408.898529, 14057.312225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17852.472800, 14087.477214, 794.650423, 794.650423, 0.000000, X, Y) && !ellipse(30734.852203, 8973.809937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29456.386800, 13319.768000, 1932.152056, 1932.152056, 0.000000, X, Y) && !ellipse(36835.225403, 13711.239777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37736.492000, 13098.586000, 2278.800066, 2278.800066, 0.000000, X, Y) && !ellipse(30013.134000, 13604.498000, 1907.936055, 1907.936055, 0.000000, X, Y) && !ellipse(37840.679688, 12913.577377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35248.919739, 12742.844391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29413.975128, 12804.803482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38224.500000, 12375.776000, 2204.744063, 2204.744063, 0.000000, X, Y) && !ellipse(39131.784000, 11885.796000, 2248.344065, 2248.344065, 0.000000, X, Y) && !ellipse(38410.764000, 12158.506000, 2204.744063, 2204.744063, 0.000000, X, Y) && !ellipse(37520.812378, 11598.455078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39567.882000, 11487.436000, 2316.768067, 2316.768067, 0.000000, X, Y) && !ellipse(17325.578949, 36602.578461, 870.000000, 870.000000, 0.000000, X, Y) [Fri May 4 10:42:22 2012] Writing fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src83.gif [Fri May 4 15:53:24 2012] Mean detx,y = (-3880.59, -7933.71) [Fri May 4 15:53:42 2012] Setting backscal keywords in source and bgd. spectrum [Fri May 4 16:02:43 2012] Binned source spectrum to 10 counts/bin [Fri May 4 16:02:44 2012] Setting source spectrum file to fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src83_src_b10.pi.gz [Fri May 4 16:02:44 2012] Setting bgd. spectrum file to fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src83_bgd.pi.gz [Sat May 5 23:27:03 2012] Updating aperture counts using extracted products [Sat May 5 23:27:03 2012] Error reading totcts from fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src83_src_b10.pi.gz [Sat May 5 23:27:09 2012] Calculating source flux in energy range 0.30-8.00 [Sat May 5 23:27:09 2012] Using photon index=1.80, rate=0.193, arf fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src83.arf [Sat May 5 23:27:09 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sat May 5 23:27:09 2012] Updating source flux to 7.1e-13 [Sat May 5 23:48:09 2012] Flag b found in src. 83 procflags, skipping spectral fitting [Sat May 5 23:48:09 2012] Flag c found in src. 83 procflags, skipping spectral fitting