[Tue May  1 11:53:07 2012] Detection parameters:
  Position = (366.9, 209.0) = 8 48 55.46 -45 38 18.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 739.4 +/- 59.2
  Background counts = 1160.5
  Rate = 0.03 +/- 0.002

[Tue May  1 11:53:12 2012] Off-axis axis estimate = 8.17'
[Tue May  1 12:11:36 2012] Using EEF radius (= 10.51 ")to estimate initial spatial extent for simple fitting
[Tue May  1 12:11:36 2012] Initial guess for spatial extent in simple fitting = 10.51"
[Tue May  1 12:11:36 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.058
[Tue May  1 12:11:36 2012] Giving source the simple spatial ID 68 for pass 0, mean size = 10.51"
[Wed May  2 01:37:10 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_src68.ximg exists
[Wed May  2 01:37:10 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_src68_1.ximg exists
[Wed May  2 01:37:10 2012] Fit fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_src68 appears to have run properly
[Wed May  2 01:37:13 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src68.ximg exists
[Wed May  2 01:37:13 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src68_1.ximg exists
[Wed May  2 01:37:13 2012] Fit fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src68 appears to have run properly
[Wed May  2 17:37:19 2012] Spatial fit model total counts = 16661.500000, observed total counts = 16471.000000
[Wed May  2 17:37:19 2012] Offset between fit and detection position for source 80 = 1.136154 pixels
[Wed May  2 17:37:19 2012] 16344.144000 total counts/ 15922.800000 bgd. counts: snr = 3.339082
Spatial fit parameters:
  Offset between fit and detection position for source 80 = 1.136154 pixels
  Position = (366.3, 209.9) = 8 48 55.73 -45 38 14.7
  Extent = 21.0 (14.2-42.0)" x 4.8 (2.9-7.4)", rotation angle = 37 (27-46) degrees
  Source counts = 421.3 +/- 127.8
  Background counts = 15922.8
  Rate = 0.008 +/- 0.002
[Wed May  2 17:37:19 2012] Vigneting correction estimate = 1.000000
[Wed May  2 17:37:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 17:37:19 2012] Assessing source extent using major axis lower bound
[Wed May  2 17:37:19 2012] Source does appear to be extended
[Wed May  2 17:37:19 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.93
[Wed May  2 17:37:19 2012] Source is asymmetric
[Wed May  2 17:37:19 2012] Source is confused with source 75
[Wed May  2 17:38:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  2 17:38:54 2012] Initial guess for spatial extent in simple fitting = 12.93"
[Wed May  2 17:38:54 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.015
[Wed May  2 17:38:54 2012] Giving source the simple spatial ID 55 for pass 1, mean size = 12.93"
[Thu May  3 13:40:53 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src55.ximg exists
[Thu May  3 13:40:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src55.csv
[Thu May  3 13:40:53 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src55_1.ximg exists
[Thu May  3 13:40:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src55.csv
[Thu May  3 13:40:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src55_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 13:40:55 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src55.ximg exists
[Thu May  3 13:40:55 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src55.csv
[Thu May  3 13:40:55 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src55_1.ximg exists
[Thu May  3 13:40:55 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src55.csv
[Thu May  3 13:40:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src55_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 10:40:44 2012] Spatial fit model total counts = 53617.300000, observed total counts = 45028.000000
[Fri May  4 10:40:44 2012] Poor agreement between spatial fit and data for source 80
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May  4 10:40:44 2012] Warning, spatial fit 55 centroid is now closest to src. 74
[Fri May  4 10:40:45 2012] Vigneting correction estimate = 1.000000
[Fri May  4 10:40:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 10:40:45 2012] Assessing source extent using major axis lower bound
[Fri May  4 10:40:45 2012] Source does appear to be extended
[Fri May  4 10:40:45 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.93
[Fri May  4 10:40:45 2012] Source is asymmetric
[Fri May  4 10:42:22 2012] XMMSAS src. selection expression = ellipse(31816.738600, 18215.110580, 1261.440036, 290.739608, 36.718900, X, Y)
[Fri May  4 10:42:22 2012] Writing source region out to fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src80_src.reg
[Fri May  4 10:42:22 2012] Extracting stamp from image fullrun_pn_xmm0412990501_pi300-10000_cl_sm2.00.img.gz, (294, 137) - (439, 282)
[Fri May  4 10:42:22 2012] XMMSAS bgd. selection expression = annulus(31816.738600, 18215.110580, 2102.400060, 4204.800121, X, Y) && !ellipse(34210.296173, 15621.890457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34471.341309, 15003.653610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36377.718719, 14723.549347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26613.069800, 22362.485000, 1263.224036, 341.316010, 203.709000, X, Y) && !ellipse(27312.923004, 21442.354538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27712.682000, 21282.126000, 1340.992039, 1340.992039, 0.000000, X, Y) && !ellipse(29842.388000, 20560.750732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30724.062000, 19864.282000, 1589.664046, 1589.664046, 0.000000, X, Y) && !ellipse(27534.453609, 19556.010522, 868.535645, 416.820606, 119.686026, X, Y) && !ellipse(31161.344000, 19467.438000, 1553.624045, 1553.624045, 0.000000, X, Y) && !ellipse(31842.358000, 18653.340000, 3523.552101, 2129.664061, 42.615000, X, Y) && !ellipse(32374.358000, 18618.200000, 1658.096048, 1658.096048, 0.000000, X, Y) && !ellipse(31022.502000, 18946.532000, 1649.840047, 1649.840047, 0.000000, X, Y) && !ellipse(32419.732000, 17297.748000, 10672.656307, 10672.656307, 0.000000, X, Y) && !ellipse(32670.494000, 17832.852000, 3316.192095, 3316.192095, 0.000000, X, Y) && !ellipse(34523.762207, 17009.404785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32900.466000, 16636.480000, 1778.776051, 1778.776051, 0.000000, X, Y) && !ellipse(32554.346000, 16583.814000, 1868.824054, 1868.824054, 0.000000, X, Y) && !ellipse(33959.297668, 17272.182327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33730.712921, 16469.679810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34705.714020, 16380.190720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35137.350098, 16222.513840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35347.827545, 15531.207932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32990.538544, 16146.905243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35262.548004, 14991.907761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35751.734497, 14580.027756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35408.898529, 14057.312225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29456.386800, 13319.768000, 1932.152056, 1932.152056, 0.000000, X, Y) && !ellipse(36835.225403, 13711.239777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37736.492000, 13098.586000, 2278.800066, 2278.800066, 0.000000, X, Y) && !ellipse(30013.134000, 13604.498000, 1907.936055, 1907.936055, 0.000000, X, Y) && !ellipse(38224.500000, 12375.776000, 2204.744063, 2204.744063, 0.000000, X, Y)
[Fri May  4 10:42:22 2012] Writing fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src80.gif
[Fri May  4 15:47:05 2012] Mean detx,y = (-4456.21, -7612.90) 
[Fri May  4 15:47:11 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May  4 15:48:36 2012] Binned source spectrum to 10 counts/bin
[Fri May  4 15:48:37 2012] Setting source spectrum file to fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src80_src_b10.pi.gz
[Fri May  4 15:48:37 2012] Setting bgd. spectrum file to fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src80_bgd.pi.gz
[Sat May  5 23:27:03 2012] Updating aperture counts using extracted products
[Sat May  5 23:27:03 2012] Error reading totcts from fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src80_src_b10.pi.gz
[Sat May  5 23:27:09 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 23:27:09 2012] Using photon index=1.80, rate=0.00764, arf fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src80.arf
[Sat May  5 23:27:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 23:27:09 2012] Updating source flux to 3.4e-14
[Sat May  5 23:48:09 2012] Flag p found in src. 80 procflags, skipping spectral fitting
[Sat May  5 23:48:09 2012] Flag c found in src. 80 procflags, skipping spectral fitting