[Tue May  1 11:53:06 2012] Detection parameters:
  Position = (358.0, 217.0) = 8 48 59.17 -45 37 44.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 762.5 +/- 59.5
  Background counts = 1214.6
  Rate = 0.03 +/- 0.002

[Tue May  1 11:53:12 2012] Off-axis axis estimate = 7.31'
[Tue May  1 12:11:36 2012] Using EEF radius (= 10.08 ")to estimate initial spatial extent for simple fitting
[Tue May  1 12:11:36 2012] Initial guess for spatial extent in simple fitting = 10.08"
[Tue May  1 12:11:36 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.133
[Tue May  1 12:11:36 2012] Giving source the simple spatial ID 67 for pass 0, mean size = 10.08"
[Wed May  2 01:37:10 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_src67.ximg exists
[Wed May  2 01:37:10 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_src67_1.ximg exists
[Wed May  2 01:37:10 2012] Fit fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_src67 appears to have run properly
[Wed May  2 01:37:13 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src67.ximg exists
[Wed May  2 01:37:13 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src67_1.ximg exists
[Wed May  2 01:37:13 2012] Fit fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src67 appears to have run properly
[Wed May  2 17:37:19 2012] Spatial fit model total counts = 17178.500000, observed total counts = 17175.000000
[Wed May  2 17:37:19 2012] Offset between fit and detection position for source 79 = 1.527172 pixels
[Wed May  2 17:37:19 2012] Warning, changing simple spatial fit ID from 67 to 65
[Wed May  2 17:37:19 2012] 17022.710000 total counts/ 15422.100000 bgd. counts: snr = 12.888838
Spatial fit parameters:
  Offset between fit and detection position for source 79 = 1.527172 pixels
  Position = (357.1, 218.3) = 8 48 59.52 -45 37 38.2
  Extent = 20.6 (16.5-41.2)", rotation angle = 0
  Source counts = 1600.6 +/- 130.5
  Background counts = 15422.1
  Rate = 0.03 +/- 0.002
[Wed May  2 17:37:19 2012] Vigneting correction estimate = 1.000000
[Wed May  2 17:37:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 17:37:19 2012] Assessing source extent using major axis lower bound
[Wed May  2 17:37:19 2012] Source does appear to be extended
[Wed May  2 17:37:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 17:37:19 2012] Source is confused with source 72
[Wed May  2 17:38:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  2 17:38:54 2012] Initial guess for spatial extent in simple fitting = 20.62"
[Wed May  2 17:38:54 2012] source mask rpix=4.7, npix_max = 109, mask sum = 110, frac = 1.001
[Wed May  2 17:38:54 2012] Giving source the simple spatial ID 54 for pass 1, mean size = 20.62"
[Thu May  3 13:40:52 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src54.ximg exists
[Thu May  3 13:40:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src54.csv
[Thu May  3 13:40:53 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src54_1.ximg exists
[Thu May  3 13:40:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src54.csv
[Thu May  3 13:40:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 13:40:55 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src54.ximg exists
[Thu May  3 13:40:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src54.csv
[Thu May  3 13:40:55 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists
[Thu May  3 13:40:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src54.csv
[Thu May  3 13:40:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 10:40:44 2012] Warning, spatial fit 54 centroid is now closest to src. 80
[Fri May  4 10:40:45 2012] Vigneting correction estimate = 1.000000
[Fri May  4 10:40:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 10:40:45 2012] Assessing source extent using major axis lower bound
[Fri May  4 10:40:45 2012] Source does appear to be extended
[Fri May  4 10:40:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 10:42:21 2012] Counts = 1600.610000, rescaling region sizes by 2.000000
[Fri May  4 10:42:21 2012] XMMSAS src. selection expression = ellipse(31022.502000, 18946.532000, 2474.760071, 2474.760071, 0.000000, X, Y)
[Fri May  4 10:42:21 2012] Writing source region out to fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src79_src.reg
[Fri May  4 10:42:21 2012] Extracting stamp from image fullrun_pn_xmm0412990501_pi300-10000_cl_sm2.00.img.gz, (215, 76) - (499, 361)
[Fri May  4 10:42:22 2012] XMMSAS bgd. selection expression = annulus(31022.502000, 18946.532000, 8249.200237, 16498.400475, X, Y) && !ellipse(34210.296173, 15621.890457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22901.193573, 21129.181885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25311.957520, 22316.715424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37067.434265, 12151.187042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21831.998672, 23802.724701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34471.341309, 15003.653610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36377.718719, 14723.549347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25709.343719, 7336.172600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18806.344543, 34795.682343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17538.290000, 27388.840600, 1614.000046, 1614.000046, 0.000000, X, Y) && !ellipse(16715.692000, 28268.668000, 3228.000093, 3228.000093, 0.000000, X, Y) && !ellipse(26249.363403, 27178.687378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18780.769974, 26820.885010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18167.292000, 26784.498000, 3156.272091, 3156.272091, 0.000000, X, Y) && !ellipse(23077.649475, 25782.088867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36883.374359, 25679.647217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35907.321869, 25536.265015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22726.560000, 25268.514000, 1217.968035, 1217.968035, 0.000000, X, Y) && !ellipse(21921.479797, 25099.276398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23653.054400, 25084.854500, 943.416027, 943.416027, 0.000000, X, Y) && !ellipse(22857.000610, 24661.817841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24434.831421, 7445.231911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20492.294785, 24999.941132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21346.874374, 24644.315887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22389.626000, 24266.150000, 1248.936036, 1248.936036, 0.000000, X, Y) && !ellipse(20735.557861, 24147.809479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23789.132000, 23129.076000, 1265.464036, 1265.464036, 0.000000, X, Y) && !ellipse(24621.766724, 23236.021973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22738.934113, 24053.170959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25596.677551, 22639.535126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26613.069800, 22362.485000, 1263.224036, 341.316010, 203.709000, X, Y) && !ellipse(27312.923004, 21442.354538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26021.342000, 21787.804400, 1298.488037, 1298.488037, 0.000000, X, Y) && !ellipse(27712.682000, 21282.126000, 1340.992039, 1340.992039, 0.000000, X, Y) && !ellipse(29842.388000, 20560.750732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24281.949524, 20297.998413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24604.538000, 19802.512000, 1418.584041, 1418.584041, 0.000000, X, Y) && !ellipse(30724.062000, 19864.282000, 1589.664046, 1589.664046, 0.000000, X, Y) && !ellipse(27534.453609, 19556.010522, 868.535645, 416.820606, 119.686026, X, Y) && !ellipse(31161.344000, 19467.438000, 1553.624045, 1553.624045, 0.000000, X, Y) && !ellipse(31842.358000, 18653.340000, 3523.552101, 2129.664061, 42.615000, X, Y) && !ellipse(32374.358000, 18618.200000, 1658.096048, 1658.096048, 0.000000, X, Y) && !ellipse(24692.752000, 19577.382000, 1451.184042, 1451.184042, 0.000000, X, Y) && !ellipse(25703.261047, 18399.611313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31816.738600, 18215.110580, 1681.920048, 387.652811, 36.718900, X, Y) && !ellipse(26038.338000, 17960.288000, 1529.832044, 1016.040029, 244.966000, X, Y) && !ellipse(32419.732000, 17297.748000, 10672.656307, 10672.656307, 0.000000, X, Y) && !ellipse(32670.494000, 17832.852000, 3316.192095, 3316.192095, 0.000000, X, Y) && !ellipse(26245.051636, 17612.588943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34523.762207, 17009.404785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32900.466000, 16636.480000, 1778.776051, 1778.776051, 0.000000, X, Y) && !ellipse(32554.346000, 16583.814000, 1868.824054, 1868.824054, 0.000000, X, Y) && !ellipse(33959.297668, 17272.182327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33730.712921, 16469.679810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34705.714020, 16380.190720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35137.350098, 16222.513840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35347.827545, 15531.207932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32990.538544, 16146.905243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35262.548004, 14991.907761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35751.734497, 14580.027756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35408.898529, 14057.312225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17852.472800, 14087.477214, 794.650423, 794.650423, 0.000000, X, Y) && !ellipse(30734.852203, 8973.809937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29456.386800, 13319.768000, 1932.152056, 1932.152056, 0.000000, X, Y) && !ellipse(36835.225403, 13711.239777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37736.492000, 13098.586000, 2278.800066, 2278.800066, 0.000000, X, Y) && !ellipse(30013.134000, 13604.498000, 1907.936055, 1907.936055, 0.000000, X, Y) && !ellipse(37840.679688, 12913.577377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35248.919739, 12742.844391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29413.975128, 12804.803482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38224.500000, 12375.776000, 2204.744063, 2204.744063, 0.000000, X, Y) && !ellipse(39131.784000, 11885.796000, 2248.344065, 2248.344065, 0.000000, X, Y) && !ellipse(38410.764000, 12158.506000, 2204.744063, 2204.744063, 0.000000, X, Y) && !ellipse(37520.812378, 11598.455078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39567.882000, 11487.436000, 2316.768067, 2316.768067, 0.000000, X, Y)
[Fri May  4 10:42:22 2012] Writing fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src79.gif
[Fri May  4 15:31:10 2012] Mean detx,y = (-4053.33, -6735.45) 
[Fri May  4 15:31:41 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May  4 15:45:18 2012] Binned source spectrum to 10 counts/bin
[Fri May  4 15:45:19 2012] Setting source spectrum file to fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src79_src_b10.pi.gz
[Fri May  4 15:45:19 2012] Setting bgd. spectrum file to fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src79_bgd.pi.gz
[Sat May  5 23:27:03 2012] Updating aperture counts using extracted products
[Sat May  5 23:27:03 2012] Error reading totcts from fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src79_src_b10.pi.gz
[Sat May  5 23:27:09 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 23:27:09 2012] Using photon index=1.80, rate=0.029, arf fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src79.arf
[Sat May  5 23:27:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 23:27:09 2012] Updating source flux to 9.3e-14
[Sat May  5 23:48:09 2012] Flag c found in src. 79 procflags, skipping spectral fitting