[Tue May  1 11:53:04 2012] Detection parameters:
  Position = (301.0, 252.0) = 8 49 22.81 -45 35 11.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 565.5 +/- 58.1
  Background counts = 1394.3
  Rate = 0.01 +/- 0.001

[Tue May  1 11:53:12 2012] Off-axis axis estimate = 3.37'
[Tue May  1 12:11:36 2012] Using EEF radius (= 8.12 ")to estimate initial spatial extent for simple fitting
[Tue May  1 12:11:36 2012] Initial guess for spatial extent in simple fitting = 8.12"
[Tue May  1 12:11:36 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.715
[Tue May  1 12:11:36 2012] Giving source the simple spatial ID 48 for pass 0, mean size = 8.12"
[Wed May  2 01:37:09 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_src48.ximg exists
[Wed May  2 01:37:09 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_src48_1.ximg exists
[Wed May  2 01:37:09 2012] Fit fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_src48 appears to have run properly
[Wed May  2 01:37:12 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Wed May  2 01:37:12 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Wed May  2 01:37:12 2012] Fit fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src48 appears to have run properly
[Wed May  2 17:37:18 2012] Spatial fit model total counts = 17848.800000, observed total counts = 16474.000000
[Wed May  2 17:37:18 2012] Offset between fit and detection position for source 60 = 1.632182 pixels
[Wed May  2 17:37:18 2012] 17818.146000 total counts/ 16977.300000 bgd. counts: snr = 6.453304
Spatial fit parameters:
  Offset between fit and detection position for source 60 = 1.632182 pixels
  Position = (299.7, 251.0) = 8 49 23.36 -45 35 16.3
  Extent = 16.2 (16.2-32.5)", rotation angle = 0
  Source counts = 840.8 +/- 133.5
  Background counts = 16977.3
  Rate = 0.02 +/- 0.002
[Wed May  2 17:37:19 2012] Vigneting correction estimate = 1.000000
[Wed May  2 17:37:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 17:37:19 2012] Assessing source extent using major axis lower bound
[Wed May  2 17:37:19 2012] Source does appear to be extended
[Wed May  2 17:37:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 17:37:19 2012] Source is confused with source 3
[Wed May  2 17:38:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  2 17:38:54 2012] Initial guess for spatial extent in simple fitting = 16.23"
[Wed May  2 17:38:54 2012] source mask rpix=3.7, npix_max = 71, mask sum = 65, frac = 0.908
[Wed May  2 17:38:54 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 16.23"
[Thu May  3 13:40:52 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src37.ximg exists
[Thu May  3 13:40:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src37.csv
[Thu May  3 13:40:52 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src37_1.ximg exists
[Thu May  3 13:40:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src37.csv
[Thu May  3 13:40:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 13:40:54 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Thu May  3 13:40:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src37.csv
[Thu May  3 13:40:54 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Thu May  3 13:40:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src37.csv
[Thu May  3 13:40:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 10:40:44 2012] Warning, spatial fit 37 centroid is now closest to src. 3
[Fri May  4 10:40:45 2012] Vigneting correction estimate = 1.000000
[Fri May  4 10:40:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 10:40:45 2012] Assessing source extent using major axis lower bound
[Fri May  4 10:40:45 2012] Source does appear to be extended
[Fri May  4 10:40:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 10:42:19 2012] XMMSAS src. selection expression = ellipse(26021.342000, 21787.804400, 973.866028, 973.866028, 0.000000, X, Y)
[Fri May  4 10:42:19 2012] Writing source region out to fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src60_src.reg
[Fri May  4 10:42:19 2012] Extracting stamp from image fullrun_pn_xmm0412990501_pi300-10000_cl_sm2.00.img.gz, (244, 195) - (356, 307)
[Fri May  4 10:42:19 2012] XMMSAS bgd. selection expression = annulus(26021.342000, 21787.804400, 1623.110047, 3246.220093, X, Y) && !ellipse(22901.193573, 21129.181885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25311.957520, 22316.715424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23077.649475, 25782.088867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22726.560000, 25268.514000, 1217.968035, 1217.968035, 0.000000, X, Y) && !ellipse(21921.479797, 25099.276398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23653.054400, 25084.854500, 943.416027, 943.416027, 0.000000, X, Y) && !ellipse(22857.000610, 24661.817841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22389.626000, 24266.150000, 1248.936036, 1248.936036, 0.000000, X, Y) && !ellipse(23789.132000, 23129.076000, 1265.464036, 1265.464036, 0.000000, X, Y) && !ellipse(24621.766724, 23236.021973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22738.934113, 24053.170959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25596.677551, 22639.535126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26613.069800, 22362.485000, 1263.224036, 341.316010, 203.709000, X, Y) && !ellipse(27312.923004, 21442.354538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27712.682000, 21282.126000, 1340.992039, 1340.992039, 0.000000, X, Y) && !ellipse(29842.388000, 20560.750732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24281.949524, 20297.998413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24604.538000, 19802.512000, 1418.584041, 1418.584041, 0.000000, X, Y) && !ellipse(30724.062000, 19864.282000, 1589.664046, 1589.664046, 0.000000, X, Y) && !ellipse(27534.453609, 19556.010522, 868.535645, 416.820606, 119.686026, X, Y) && !ellipse(31842.358000, 18653.340000, 3523.552101, 2129.664061, 42.615000, X, Y) && !ellipse(24692.752000, 19577.382000, 1451.184042, 1451.184042, 0.000000, X, Y) && !ellipse(25703.261047, 18399.611313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26038.338000, 17960.288000, 1529.832044, 1016.040029, 244.966000, X, Y) && !ellipse(32419.732000, 17297.748000, 10672.656307, 10672.656307, 0.000000, X, Y)
[Fri May  4 10:42:19 2012] Writing fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src60.gif
[Fri May  4 13:34:36 2012] Mean detx,y = (-45.39, -2497.87) 
[Fri May  4 13:34:47 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May  4 13:35:54 2012] Binned source spectrum to 10 counts/bin
[Fri May  4 13:35:55 2012] Setting source spectrum file to fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Fri May  4 13:35:55 2012] Setting bgd. spectrum file to fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src60_bgd.pi.gz
[Sat May  5 23:27:02 2012] Updating aperture counts using extracted products
[Sat May  5 23:27:02 2012] Error reading totcts from fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Sat May  5 23:27:08 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 23:27:08 2012] Using photon index=1.80, rate=0.0153, arf fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src60.arf
[Sat May  5 23:27:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 23:27:08 2012] Updating source flux to 4.1e-14
[Sat May  5 23:48:09 2012] Flag c found in src. 60 procflags, skipping spectral fitting