[Tue May 1 11:52:55 2012] Detection parameters: Position = (396.8, 173.0) = 8 48 43.03 -45 41 10.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 1581.8 +/- 246.2 Background counts = 702.9 Rate = 0.03 +/- 0.004 [Tue May 1 11:53:12 2012] Off-axis axis estimate = 11.56' [Tue May 1 12:11:36 2012] Using EEF radius (= 12.21 ")to estimate initial spatial extent for simple fitting [Tue May 1 12:11:36 2012] Initial guess for spatial extent in simple fitting = 12.21" [Tue May 1 12:11:36 2012] source mask rpix=2.8, npix_max = 43, mask sum = 27, frac = 0.618 [Tue May 1 12:11:36 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.21" [Wed May 2 01:37:08 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_src1.ximg exists [Wed May 2 01:37:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_src1.csv [Wed May 2 01:37:08 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_src1_1.ximg exists [Wed May 2 01:37:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_src1.csv [Wed May 2 01:37:08 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 2 01:37:11 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Wed May 2 01:37:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src1.csv [Wed May 2 01:37:11 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Wed May 2 01:37:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src1.csv [Wed May 2 01:37:11 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 2 17:37:18 2012] Warning, spatial fit 1 centroid is now closest to src. 99 [Wed May 2 17:37:19 2012] Vigneting correction estimate = 1.000000 [Wed May 2 17:37:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 2 17:37:19 2012] Assessing source extent using major [Wed May 2 17:37:19 2012] Source does appear to be extended [Wed May 2 17:37:19 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 2 17:38:54 2012] Using EEF radius (= 12.21 ")to estimate initial spatial extent for simple fitting [Wed May 2 17:38:54 2012] Initial guess for spatial extent in simple fitting = 12.21" [Wed May 2 17:38:54 2012] source mask rpix=2.8, npix_max = 43, mask sum = 27, frac = 0.618 [Wed May 2 17:38:54 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 12.21" [Thu May 3 13:40:51 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src1.ximg exists [Thu May 3 13:40:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src1.csv [Thu May 3 13:40:51 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src1_1.ximg exists [Thu May 3 13:40:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src1.csv [Thu May 3 13:40:51 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 3 13:40:53 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Thu May 3 13:40:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src1.csv [Thu May 3 13:40:53 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Thu May 3 13:40:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src1.csv [Thu May 3 13:40:53 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 4 10:40:44 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 18.289287 pixels away [Fri May 4 10:40:45 2012] Source 6 is offset by 1.566061 and 4.799536 pixels which is larger than 2 X fitted extent = 1.410786 x 1.410786, not incorporating fit results [Fri May 4 10:40:45 2012] Vigneting correction estimate = 1.000000 [Fri May 4 10:40:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 4 10:40:45 2012] Assessing source extent using major [Fri May 4 10:40:45 2012] Source does appear to be extended [Fri May 4 10:40:45 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Fri May 4 10:42:16 2012] Counts = 1581.757324, rescaling region sizes by 2.000000 [Fri May 4 10:42:16 2012] XMMSAS src. selection expression = ellipse(34471.341309, 15003.653610, 1305.000000, 1305.000000, 0.000000, X, Y) [Fri May 4 10:42:16 2012] Writing source region out to fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src6_src.reg [Fri May 4 10:42:16 2012] Extracting stamp from image fullrun_pn_xmm0412990501_pi300-10000_cl_sm2.00.img.gz, (322, 98) - (472, 248) [Fri May 4 10:42:17 2012] XMMSAS bgd. selection expression = annulus(34471.341309, 15003.653610, 4350.000000, 8700.000000, X, Y) && !ellipse(34210.296173, 15621.890457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25311.957520, 22316.715424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37067.434265, 12151.187042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36377.718719, 14723.549347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25709.343719, 7336.172600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25596.677551, 22639.535126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26613.069800, 22362.485000, 1263.224036, 341.316010, 203.709000, X, Y) && !ellipse(27312.923004, 21442.354538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26021.342000, 21787.804400, 1298.488037, 1298.488037, 0.000000, X, Y) && !ellipse(27712.682000, 21282.126000, 1340.992039, 1340.992039, 0.000000, X, Y) && !ellipse(29842.388000, 20560.750732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24604.538000, 19802.512000, 1418.584041, 1418.584041, 0.000000, X, Y) && !ellipse(30724.062000, 19864.282000, 1589.664046, 1589.664046, 0.000000, X, Y) && !ellipse(27534.453609, 19556.010522, 868.535645, 416.820606, 119.686026, X, Y) && !ellipse(31161.344000, 19467.438000, 1553.624045, 1553.624045, 0.000000, X, Y) && !ellipse(31842.358000, 18653.340000, 3523.552101, 2129.664061, 42.615000, X, Y) && !ellipse(32374.358000, 18618.200000, 1658.096048, 1658.096048, 0.000000, X, Y) && !ellipse(24692.752000, 19577.382000, 1451.184042, 1451.184042, 0.000000, X, Y) && !ellipse(25703.261047, 18399.611313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31022.502000, 18946.532000, 1649.840047, 1649.840047, 0.000000, X, Y) && !ellipse(31816.738600, 18215.110580, 1681.920048, 387.652811, 36.718900, X, Y) && !ellipse(26038.338000, 17960.288000, 1529.832044, 1016.040029, 244.966000, X, Y) && !ellipse(32419.732000, 17297.748000, 10672.656307, 10672.656307, 0.000000, X, Y) && !ellipse(32670.494000, 17832.852000, 3316.192095, 3316.192095, 0.000000, X, Y) && !ellipse(26245.051636, 17612.588943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34523.762207, 17009.404785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32900.466000, 16636.480000, 1778.776051, 1778.776051, 0.000000, X, Y) && !ellipse(32554.346000, 16583.814000, 1868.824054, 1868.824054, 0.000000, X, Y) && !ellipse(33959.297668, 17272.182327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33730.712921, 16469.679810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34705.714020, 16380.190720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35137.350098, 16222.513840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35347.827545, 15531.207932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32990.538544, 16146.905243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35262.548004, 14991.907761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35751.734497, 14580.027756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35408.898529, 14057.312225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30734.852203, 8973.809937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29456.386800, 13319.768000, 1932.152056, 1932.152056, 0.000000, X, Y) && !ellipse(36835.225403, 13711.239777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37736.492000, 13098.586000, 2278.800066, 2278.800066, 0.000000, X, Y) && !ellipse(30013.134000, 13604.498000, 1907.936055, 1907.936055, 0.000000, X, Y) && !ellipse(37840.679688, 12913.577377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35248.919739, 12742.844391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29413.975128, 12804.803482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38224.500000, 12375.776000, 2204.744063, 2204.744063, 0.000000, X, Y) && !ellipse(39131.784000, 11885.796000, 2248.344065, 2248.344065, 0.000000, X, Y) && !ellipse(38410.764000, 12158.506000, 2204.744063, 2204.744063, 0.000000, X, Y) && !ellipse(37520.812378, 11598.455078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39567.882000, 11487.436000, 2316.768067, 2316.768067, 0.000000, X, Y) [Fri May 4 10:42:17 2012] Writing fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src6.gif [Fri May 4 11:10:32 2012] Mean detx,y = (-6074.96, -11374.76) [Fri May 4 11:10:39 2012] Setting backscal keywords in source and bgd. spectrum [Fri May 4 11:12:33 2012] Binned source spectrum to 10 counts/bin [Fri May 4 11:12:34 2012] Setting source spectrum file to fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src6_src_b10.pi.gz [Fri May 4 11:12:34 2012] Setting bgd. spectrum file to fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src6_bgd.pi.gz [Fri May 4 21:29:49 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done [Fri May 4 21:29:50 2012] rmf not generated due to insufficient counts [Sat May 5 23:27:00 2012] Updating aperture counts using extracted products [Sat May 5 23:27:00 2012] Error reading totcts from fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src6_src_b10.pi.gz [Sat May 5 23:27:06 2012] Calculating source flux in energy range 0.30-8.00 [Sat May 5 23:27:06 2012] Using photon index=1.80, rate=0.0287, arf fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src6.arf [Sat May 5 23:27:06 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sat May 5 23:27:06 2012] Updating source flux to 3.1e-13 [Sat May 5 23:48:09 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sat May 5 23:58:20 2012] xmm0412990501/analysis//spectral/fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete