[Tue May  1 11:53:02 2012] Detection parameters:
  Position = (268.3, 270.8) = 8 49 36.33 -45 33 51.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 260.5 +/- 52.8
  Background counts = 1383.8
  Rate = 0.006 +/- 0.001

[Tue May  1 11:53:12 2012] Off-axis axis estimate = 2.96'
[Tue May  1 12:11:36 2012] Using EEF radius (= 7.91 ")to estimate initial spatial extent for simple fitting
[Tue May  1 12:11:36 2012] Initial guess for spatial extent in simple fitting = 7.91"
[Tue May  1 12:11:36 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.930
[Tue May  1 12:11:36 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 7.91"
[Wed May  2 01:37:09 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_src39.ximg exists
[Wed May  2 01:37:09 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_src39_1.ximg exists
[Wed May  2 01:37:09 2012] Fit fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_src39 appears to have run properly
[Wed May  2 01:37:12 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Wed May  2 01:37:12 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Wed May  2 01:37:12 2012] Fit fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Wed May  2 17:37:18 2012] Spatial fit model total counts = 16266.500000, observed total counts = 16228.000000
[Wed May  2 17:37:18 2012] Offset between fit and detection position for source 50 = 7.180441 pixels
[Wed May  2 17:37:18 2012] 16149.541000 total counts/ 15721.300000 bgd. counts: snr = 3.415419
Spatial fit parameters:
  Offset between fit and detection position for source 50 = 7.180441 pixels
  Position = (274.0, 266.4) = 8 49 33.98 -45 34 9.2
  Extent = 15.8 (15.8-31.6)", rotation angle = 0
  Source counts = 428.2 +/- 127.1
  Background counts = 15721.3
  Rate = 0.008 +/- 0.002
[Wed May  2 17:37:19 2012] Vigneting correction estimate = 1.000000
[Wed May  2 17:37:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 17:37:19 2012] Assessing source extent using major axis lower bound
[Wed May  2 17:37:19 2012] Source does appear to be extended
[Wed May  2 17:37:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 17:37:19 2012] Source is confused with source 53
[Wed May  2 17:38:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  2 17:38:54 2012] Initial guess for spatial extent in simple fitting = 15.82"
[Wed May  2 17:38:54 2012] source mask rpix=3.6, npix_max = 68, mask sum = 66, frac = 0.964
[Wed May  2 17:38:54 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 15.82"
[Thu May  3 13:40:52 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src31.ximg exists
[Thu May  3 13:40:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src31.csv
[Thu May  3 13:40:52 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src31_1.ximg exists
[Thu May  3 13:40:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src31.csv
[Thu May  3 13:40:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 13:40:54 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Thu May  3 13:40:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src31.csv
[Thu May  3 13:40:54 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Thu May  3 13:40:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src31.csv
[Thu May  3 13:40:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 10:40:44 2012] Spatial fit model total counts = 29345.400000, observed total counts = 25270.000000
[Fri May  4 10:40:44 2012] Poor agreement between spatial fit and data for source 50
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May  4 10:40:44 2012] Spatial fit model total counts = 17140.400000, observed total counts = 15161.000000
[Fri May  4 10:40:44 2012] Poor agreement between spatial fit and data for source 50
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May  4 10:40:45 2012] Vigneting correction estimate = 1.000000
[Fri May  4 10:40:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 10:40:45 2012] Assessing source extent using major axis lower bound
[Fri May  4 10:40:45 2012] Source does appear to be extended
[Fri May  4 10:40:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 10:42:19 2012] XMMSAS src. selection expression = ellipse(23789.132000, 23129.076000, 949.098027, 949.098027, 0.000000, X, Y)
[Fri May  4 10:42:19 2012] Writing source region out to fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src50_src.reg
[Fri May  4 10:42:19 2012] Extracting stamp from image fullrun_pn_xmm0412990501_pi300-10000_cl_sm2.00.img.gz, (219, 212) - (329, 321)
[Fri May  4 10:42:19 2012] XMMSAS bgd. selection expression = annulus(23789.132000, 23129.076000, 1581.830046, 3163.660091, X, Y) && !ellipse(22901.193573, 21129.181885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25311.957520, 22316.715424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21831.998672, 23802.724701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18167.292000, 26784.498000, 3156.272091, 3156.272091, 0.000000, X, Y) && !ellipse(23077.649475, 25782.088867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22726.560000, 25268.514000, 1217.968035, 1217.968035, 0.000000, X, Y) && !ellipse(21921.479797, 25099.276398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23653.054400, 25084.854500, 943.416027, 943.416027, 0.000000, X, Y) && !ellipse(22857.000610, 24661.817841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20492.294785, 24999.941132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21346.874374, 24644.315887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22389.626000, 24266.150000, 1248.936036, 1248.936036, 0.000000, X, Y) && !ellipse(20735.557861, 24147.809479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24621.766724, 23236.021973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22738.934113, 24053.170959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25596.677551, 22639.535126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26613.069800, 22362.485000, 1263.224036, 341.316010, 203.709000, X, Y) && !ellipse(27312.923004, 21442.354538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26021.342000, 21787.804400, 1298.488037, 1298.488037, 0.000000, X, Y) && !ellipse(27712.682000, 21282.126000, 1340.992039, 1340.992039, 0.000000, X, Y) && !ellipse(24281.949524, 20297.998413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24604.538000, 19802.512000, 1418.584041, 1418.584041, 0.000000, X, Y) && !ellipse(27534.453609, 19556.010522, 868.535645, 416.820606, 119.686026, X, Y) && !ellipse(24692.752000, 19577.382000, 1451.184042, 1451.184042, 0.000000, X, Y) && !ellipse(32419.732000, 17297.748000, 10672.656307, 10672.656307, 0.000000, X, Y)
[Fri May  4 10:42:19 2012] Writing fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src50.gif
[Fri May  4 13:12:55 2012] Mean detx,y = (1801.46, -501.33) 
[Fri May  4 13:13:07 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May  4 13:14:40 2012] Binned source spectrum to 10 counts/bin
[Fri May  4 13:14:41 2012] Setting source spectrum file to fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Fri May  4 13:14:41 2012] Setting bgd. spectrum file to fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Sat May  5 23:27:02 2012] Updating aperture counts using extracted products
[Sat May  5 23:27:02 2012] Error reading totcts from fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Sat May  5 23:27:08 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 23:27:08 2012] Using photon index=1.80, rate=0.00777, arf fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src50.arf
[Sat May  5 23:27:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 23:27:08 2012] Updating source flux to 1.8e-14
[Sat May  5 23:48:09 2012] Flag p found in src. 50 procflags, skipping spectral fitting
[Sat May  5 23:48:09 2012] Flag c found in src. 50 procflags, skipping spectral fitting