[Tue May  1 11:53:12 2012] Detection parameters:
  Position = (451.2, 131.1) = 8 48 20.41 -45 43 56.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 280.1 +/- 35.4
  Background counts = 358.0
  Rate = 0.005 +/- 0.0006

[Tue May  1 11:53:12 2012] Off-axis axis estimate = 16.43'
[Tue May  1 12:11:36 2012] Using EEF radius (= 14.64 ")to estimate initial spatial extent for simple fitting
[Tue May  1 12:11:36 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May  1 12:11:36 2012] Initial guess for spatial extent in simple fitting = 14.64"
[Tue May  1 12:11:36 2012] source mask rpix=3.4, npix_max = 59, mask sum = 57, frac = 0.953
[Tue May  1 12:11:36 2012] Giving source the simple spatial ID 100 for pass 0, mean size = 14.64"
[Wed May  2 01:37:11 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_src100.ximg exists
[Wed May  2 01:37:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_src100.csv
[Wed May  2 01:37:11 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_src100_1.ximg exists
[Wed May  2 01:37:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_src100.csv
[Wed May  2 01:37:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_src100_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_src100.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 01:37:13 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src100.ximg exists
[Wed May  2 01:37:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src100.csv
[Wed May  2 01:37:13 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src100_1.ximg exists
[Wed May  2 01:37:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src100.csv
[Wed May  2 01:37:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src100_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src100.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 17:37:19 2012] Spatial fit model total counts = 7282.680000, observed total counts = 6932.000000
[Wed May  2 17:37:19 2012] Offset between fit and detection position for source 116 = 4.465958 pixels
[Wed May  2 17:37:19 2012] Warning, changing simple spatial fit ID from 100 to 97
[Wed May  2 17:37:19 2012] 7152.410000 total counts/ 5408.770000 bgd. counts: snr = 23.708690
Spatial fit parameters:
  Offset between fit and detection position for source 116 = 4.465958 pixels
  Position = (455.4, 132.6) = 8 48 18.67 -45 43 50.1
  Extent = 29.0 (28.9-29.0)", rotation angle = 0
  Source counts = 1743.6 +/- 84.6
  Background counts = 5408.8
  Rate = 0.03 +/- 0.002
[Wed May  2 17:37:19 2012] Vigneting correction estimate = 1.000000
[Wed May  2 17:37:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 17:37:19 2012] Assessing source extent using major axis lower bound
[Wed May  2 17:37:19 2012] Source does appear to be extended
[Wed May  2 17:37:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 17:37:19 2012] Source is confused with source 113
[Wed May  2 17:38:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  2 17:38:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  2 17:38:54 2012] Initial guess for spatial extent in simple fitting = 28.96"
[Wed May  2 17:38:54 2012] source mask rpix=6.7, npix_max = 204, mask sum = 162, frac = 0.791
[Wed May  2 17:38:54 2012] Giving source the simple spatial ID 83 for pass 1, mean size = 28.96"
[Thu May  3 13:40:53 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src83.ximg exists
[Thu May  3 13:40:53 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src83.csv
[Thu May  3 13:40:53 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src83_1.ximg exists
[Thu May  3 13:40:53 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src83.csv
[Thu May  3 13:40:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src83_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 13:40:56 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src83.ximg exists
[Thu May  3 13:40:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src83.csv
[Thu May  3 13:40:56 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src83_1.ximg exists
[Thu May  3 13:40:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src83.csv
[Thu May  3 13:40:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src83_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 10:40:45 2012] Spatial fit model total counts = 28422.200000, observed total counts = 22664.000000
[Fri May  4 10:40:45 2012] Poor agreement between spatial fit and data for source 116
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May  4 10:40:45 2012] Source 116 is offset by 2.242023 and 3.615011 pixels which is larger than
2 X fitted extent = 1.679867 x 1.679867, not incorporating fit results
[Fri May  4 10:40:45 2012] Warning, spatial fit 83 centroid is now closest to src. 114
[Fri May  4 10:40:45 2012] Vigneting correction estimate = 1.000000
[Fri May  4 10:40:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 10:40:45 2012] Assessing source extent using major axis lower bound
[Fri May  4 10:40:45 2012] Source does appear to be extended
[Fri May  4 10:40:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 10:42:26 2012] Counts = 1743.640000, rescaling region sizes by 2.000000
[Fri May  4 10:42:26 2012] XMMSAS src. selection expression = ellipse(39567.882000, 11487.436000, 3475.152100, 3475.152100, 0.000000, X, Y)
[Fri May  4 10:42:26 2012] Writing source region out to fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src116_src.reg
[Fri May  4 10:42:26 2012] Extracting stamp from image fullrun_pn_xmm0412990501_pi300-10000_cl_sm2.00.img.gz, (256, 0) - (595, 332)
[Fri May  4 10:42:26 2012] XMMSAS bgd. selection expression = annulus(39567.882000, 11487.436000, 11583.840333, 23167.680667, X, Y) && !ellipse(34210.296173, 15621.890457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22901.193573, 21129.181885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25311.957520, 22316.715424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37067.434265, 12151.187042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21831.998672, 23802.724701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34471.341309, 15003.653610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36377.718719, 14723.549347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25709.343719, 7336.172600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18806.344543, 34795.682343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17538.290000, 27388.840600, 1614.000046, 1614.000046, 0.000000, X, Y) && !ellipse(16715.692000, 28268.668000, 3228.000093, 3228.000093, 0.000000, X, Y) && !ellipse(26249.363403, 27178.687378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18780.769974, 26820.885010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18167.292000, 26784.498000, 3156.272091, 3156.272091, 0.000000, X, Y) && !ellipse(23077.649475, 25782.088867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36883.374359, 25679.647217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35907.321869, 25536.265015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22726.560000, 25268.514000, 1217.968035, 1217.968035, 0.000000, X, Y) && !ellipse(21921.479797, 25099.276398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23653.054400, 25084.854500, 943.416027, 943.416027, 0.000000, X, Y) && !ellipse(22857.000610, 24661.817841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24434.831421, 7445.231911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20492.294785, 24999.941132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21346.874374, 24644.315887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22389.626000, 24266.150000, 1248.936036, 1248.936036, 0.000000, X, Y) && !ellipse(20735.557861, 24147.809479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23789.132000, 23129.076000, 1265.464036, 1265.464036, 0.000000, X, Y) && !ellipse(24621.766724, 23236.021973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22738.934113, 24053.170959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25596.677551, 22639.535126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26613.069800, 22362.485000, 1263.224036, 341.316010, 203.709000, X, Y) && !ellipse(27312.923004, 21442.354538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26021.342000, 21787.804400, 1298.488037, 1298.488037, 0.000000, X, Y) && !ellipse(27712.682000, 21282.126000, 1340.992039, 1340.992039, 0.000000, X, Y) && !ellipse(29842.388000, 20560.750732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24281.949524, 20297.998413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24604.538000, 19802.512000, 1418.584041, 1418.584041, 0.000000, X, Y) && !ellipse(30724.062000, 19864.282000, 1589.664046, 1589.664046, 0.000000, X, Y) && !ellipse(27534.453609, 19556.010522, 868.535645, 416.820606, 119.686026, X, Y) && !ellipse(31161.344000, 19467.438000, 1553.624045, 1553.624045, 0.000000, X, Y) && !ellipse(31842.358000, 18653.340000, 3523.552101, 2129.664061, 42.615000, X, Y) && !ellipse(32374.358000, 18618.200000, 1658.096048, 1658.096048, 0.000000, X, Y) && !ellipse(24692.752000, 19577.382000, 1451.184042, 1451.184042, 0.000000, X, Y) && !ellipse(25703.261047, 18399.611313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31022.502000, 18946.532000, 1649.840047, 1649.840047, 0.000000, X, Y) && !ellipse(31816.738600, 18215.110580, 1681.920048, 387.652811, 36.718900, X, Y) && !ellipse(26038.338000, 17960.288000, 1529.832044, 1016.040029, 244.966000, X, Y) && !ellipse(32419.732000, 17297.748000, 10672.656307, 10672.656307, 0.000000, X, Y) && !ellipse(32670.494000, 17832.852000, 3316.192095, 3316.192095, 0.000000, X, Y) && !ellipse(26245.051636, 17612.588943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34523.762207, 17009.404785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32900.466000, 16636.480000, 1778.776051, 1778.776051, 0.000000, X, Y) && !ellipse(32554.346000, 16583.814000, 1868.824054, 1868.824054, 0.000000, X, Y) && !ellipse(33959.297668, 17272.182327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33730.712921, 16469.679810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34705.714020, 16380.190720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35137.350098, 16222.513840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35347.827545, 15531.207932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32990.538544, 16146.905243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35262.548004, 14991.907761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35751.734497, 14580.027756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35408.898529, 14057.312225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17852.472800, 14087.477214, 794.650423, 794.650423, 0.000000, X, Y) && !ellipse(30734.852203, 8973.809937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29456.386800, 13319.768000, 1932.152056, 1932.152056, 0.000000, X, Y) && !ellipse(36835.225403, 13711.239777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37736.492000, 13098.586000, 2278.800066, 2278.800066, 0.000000, X, Y) && !ellipse(30013.134000, 13604.498000, 1907.936055, 1907.936055, 0.000000, X, Y) && !ellipse(37840.679688, 12913.577377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35248.919739, 12742.844391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29413.975128, 12804.803482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38224.500000, 12375.776000, 2204.744063, 2204.744063, 0.000000, X, Y) && !ellipse(39131.784000, 11885.796000, 2248.344065, 2248.344065, 0.000000, X, Y) && !ellipse(38410.764000, 12158.506000, 2204.744063, 2204.744063, 0.000000, X, Y) && !ellipse(37520.812378, 11598.455078, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  4 10:42:26 2012] Writing fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src116.gif
[Fri May  4 18:59:54 2012] Mean detx,y = (-9550.12, -14842.28) 
[Fri May  4 19:00:22 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May  4 19:12:48 2012] Binned source spectrum to 10 counts/bin
[Fri May  4 19:12:48 2012] Setting source spectrum file to fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src116_src_b10.pi.gz
[Fri May  4 19:12:48 2012] Setting bgd. spectrum file to fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src116_bgd.pi.gz
[Sat May  5 23:27:05 2012] Updating aperture counts using extracted products
[Sat May  5 23:27:05 2012] Error reading totcts from fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src116_src_b10.pi.gz
[Sat May  5 23:27:11 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 23:27:11 2012] Using photon index=1.80, rate=0.0316, arf fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src116.arf
[Sat May  5 23:27:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 23:27:12 2012] Updating source flux to 2.7e-13
[Sat May  5 23:48:09 2012] Flag b found in src. 116 procflags, skipping spectral fitting
[Sat May  5 23:48:09 2012] Flag p found in src. 116 procflags, skipping spectral fitting
[Sat May  5 23:48:09 2012] Flag c found in src. 116 procflags, skipping spectral fitting