[Tue May  1 11:53:12 2012] Detection parameters:
  Position = (451.8, 136.8) = 8 48 20.15 -45 43 29.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 229.3 +/- 36.2
  Background counts = 361.4
  Rate = 0.004 +/- 0.0007

[Tue May  1 11:53:12 2012] Off-axis axis estimate = 16.15'
[Tue May  1 12:11:36 2012] Using EEF radius (= 14.50 ")to estimate initial spatial extent for simple fitting
[Tue May  1 12:11:36 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May  1 12:11:36 2012] Initial guess for spatial extent in simple fitting = 14.50"
[Tue May  1 12:11:36 2012] source mask rpix=3.3, npix_max = 58, mask sum = 64, frac = 1.088
[Tue May  1 12:11:36 2012] Giving source the simple spatial ID 97 for pass 0, mean size = 14.50"
[Wed May  2 01:37:11 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_src97.ximg exists
[Wed May  2 01:37:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_src97.csv
[Wed May  2 01:37:11 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_src97_1.ximg exists
[Wed May  2 01:37:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_src97.csv
[Wed May  2 01:37:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_src97_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_src97.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 01:37:13 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src97.ximg exists
[Wed May  2 01:37:13 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src97_1.ximg exists
[Wed May  2 01:37:13 2012] Fit fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src97 appears to have run properly
[Wed May  2 17:37:19 2012] Spatial fit model total counts = 8082.650000, observed total counts = 8074.000000
[Wed May  2 17:37:19 2012] Offset between fit and detection position for source 112 = 1.490915 pixels
[Wed May  2 17:37:19 2012] Warning, changing simple spatial fit ID from 97 to 93
[Wed May  2 17:37:19 2012] 7660.556000 total counts/ 6681.460000 bgd. counts: snr = 11.978146
Spatial fit parameters:
  Offset between fit and detection position for source 112 = 1.490915 pixels
  Position = (450.3, 137.2) = 8 48 20.75 -45 43 30.3
  Extent = 28.1 (28.1-56.2)", rotation angle = 0
  Source counts = 979.1 +/- 87.5
  Background counts = 6681.5
  Rate = 0.02 +/- 0.002
[Wed May  2 17:37:19 2012] Vigneting correction estimate = 1.000000
[Wed May  2 17:37:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 17:37:19 2012] Assessing source extent using major axis lower bound
[Wed May  2 17:37:19 2012] Source does appear to be extended
[Wed May  2 17:37:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 17:37:19 2012] Source is confused with source 107
[Wed May  2 17:38:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  2 17:38:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  2 17:38:54 2012] Initial guess for spatial extent in simple fitting = 28.10"
[Wed May  2 17:38:54 2012] source mask rpix=6.5, npix_max = 193, mask sum = 196, frac = 1.011
[Wed May  2 17:38:54 2012] Giving source the simple spatial ID 80 for pass 1, mean size = 28.10"
[Thu May  3 13:40:53 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src80.ximg exists
[Thu May  3 13:40:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src80.csv
[Thu May  3 13:40:53 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src80_1.ximg exists
[Thu May  3 13:40:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src80.csv
[Thu May  3 13:40:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src80_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 13:40:56 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src80.ximg exists
[Thu May  3 13:40:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src80.csv
[Thu May  3 13:40:56 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src80_1.ximg exists
[Thu May  3 13:40:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src80.csv
[Thu May  3 13:40:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src80_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 10:40:45 2012] Warning, spatial fit 80 centroid is now closest to src. 104
[Fri May  4 10:40:45 2012] Vigneting correction estimate = 1.000000
[Fri May  4 10:40:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 10:40:45 2012] Assessing source extent using major axis lower bound
[Fri May  4 10:40:45 2012] Source does appear to be extended
[Fri May  4 10:40:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 10:42:26 2012] XMMSAS src. selection expression = ellipse(39131.784000, 11885.796000, 1686.258049, 1686.258049, 0.000000, X, Y)
[Fri May  4 10:42:26 2012] Writing source region out to fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src112_src.reg
[Fri May  4 10:42:26 2012] Extracting stamp from image fullrun_pn_xmm0412990501_pi300-10000_cl_sm2.00.img.gz, (353, 40) - (547, 234)
[Fri May  4 10:42:26 2012] XMMSAS bgd. selection expression = annulus(39131.784000, 11885.796000, 2810.430081, 5620.860162, X, Y) && !ellipse(34210.296173, 15621.890457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37067.434265, 12151.187042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34471.341309, 15003.653610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36377.718719, 14723.549347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31842.358000, 18653.340000, 3523.552101, 2129.664061, 42.615000, X, Y) && !ellipse(32374.358000, 18618.200000, 1658.096048, 1658.096048, 0.000000, X, Y) && !ellipse(32419.732000, 17297.748000, 10672.656307, 10672.656307, 0.000000, X, Y) && !ellipse(32670.494000, 17832.852000, 3316.192095, 3316.192095, 0.000000, X, Y) && !ellipse(34523.762207, 17009.404785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32900.466000, 16636.480000, 1778.776051, 1778.776051, 0.000000, X, Y) && !ellipse(32554.346000, 16583.814000, 1868.824054, 1868.824054, 0.000000, X, Y) && !ellipse(33959.297668, 17272.182327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33730.712921, 16469.679810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34705.714020, 16380.190720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35137.350098, 16222.513840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35347.827545, 15531.207932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32990.538544, 16146.905243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35262.548004, 14991.907761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35751.734497, 14580.027756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35408.898529, 14057.312225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36835.225403, 13711.239777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37736.492000, 13098.586000, 2278.800066, 2278.800066, 0.000000, X, Y) && !ellipse(37840.679688, 12913.577377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35248.919739, 12742.844391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38224.500000, 12375.776000, 2204.744063, 2204.744063, 0.000000, X, Y) && !ellipse(38410.764000, 12158.506000, 2204.744063, 2204.744063, 0.000000, X, Y) && !ellipse(37520.812378, 11598.455078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39567.882000, 11487.436000, 2316.768067, 2316.768067, 0.000000, X, Y)
[Fri May  4 10:42:26 2012] Writing fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src112.gif
[Fri May  4 18:50:12 2012] Mean detx,y = (-9451.96, -15460.91) 
[Fri May  4 18:50:19 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May  4 18:51:49 2012] Binned source spectrum to 10 counts/bin
[Fri May  4 18:51:49 2012] Setting source spectrum file to fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src112_src_b10.pi.gz
[Fri May  4 18:51:49 2012] Setting bgd. spectrum file to fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src112_bgd.pi.gz
[Sat May  5 23:27:05 2012] Updating aperture counts using extracted products
[Sat May  5 23:27:05 2012] Error reading totcts from fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src112_src_b10.pi.gz
[Sat May  5 23:27:11 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 23:27:11 2012] Using photon index=1.80, rate=0.0178, arf fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src112.arf
[Sat May  5 23:27:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 23:27:11 2012] Updating source flux to 1.4e-13
[Sat May  5 23:48:09 2012] Flag c found in src. 112 procflags, skipping spectral fitting