[Tue May  1 11:53:11 2012] Detection parameters:
  Position = (405.7, 147.0) = 8 48 39.30 -45 42 48.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 350.2 +/- 44.7
  Background counts = 555.4
  Rate = 0.006 +/- 0.0008

[Tue May  1 11:53:12 2012] Off-axis axis estimate = 13.45'
[Tue May  1 12:11:36 2012] Using EEF radius (= 13.16 ")to estimate initial spatial extent for simple fitting
[Tue May  1 12:11:36 2012] Initial guess for spatial extent in simple fitting = 13.16"
[Tue May  1 12:11:36 2012] source mask rpix=3.0, npix_max = 49, mask sum = 31, frac = 0.624
[Tue May  1 12:11:36 2012] Giving source the simple spatial ID 94 for pass 0, mean size = 13.16"
[Wed May  2 01:37:10 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_src94.ximg exists
[Wed May  2 01:37:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_src94.csv
[Wed May  2 01:37:10 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_src94_1.ximg exists
[Wed May  2 01:37:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_src94.csv
[Wed May  2 01:37:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_src94_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_src94.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 01:37:13 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src94.ximg exists
[Wed May  2 01:37:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src94.csv
[Wed May  2 01:37:13 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src94_1.ximg exists
[Wed May  2 01:37:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src94.csv
[Wed May  2 01:37:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src94_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src94.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 17:37:19 2012] Warning, spatial fit 94 centroid is now closest to src. 4
[Wed May  2 17:37:19 2012] Vigneting correction estimate = 1.000000
[Wed May  2 17:37:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 17:37:19 2012] Assessing source extent using major
[Wed May  2 17:37:19 2012] Source does appear to be extended
[Wed May  2 17:37:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 17:38:54 2012] Using EEF radius (= 13.16 ")to estimate initial spatial extent for simple fitting
[Wed May  2 17:38:54 2012] Initial guess for spatial extent in simple fitting = 13.16"
[Wed May  2 17:38:54 2012] source mask rpix=3.0, npix_max = 49, mask sum = 31, frac = 0.624
[Wed May  2 17:38:54 2012] Giving source the simple spatial ID 77 for pass 1, mean size = 13.16"
[Thu May  3 13:40:53 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src77.ximg exists
[Thu May  3 13:40:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src77.csv
[Thu May  3 13:40:53 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src77_1.ximg exists
[Thu May  3 13:40:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src77.csv
[Thu May  3 13:40:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src77_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 13:40:56 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src77.ximg exists
[Thu May  3 13:40:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src77.csv
[Thu May  3 13:40:56 2012] fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src77_1.ximg exists
[Thu May  3 13:40:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src77.csv
[Thu May  3 13:40:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src77_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 10:40:45 2012] Source 109 is offset by -4.204992 and 0.214784 pixels which is larger than
2 X fitted extent = 2.614979 x 2.614979, not incorporating fit results
[Fri May  4 10:40:45 2012] Vigneting correction estimate = 1.000000
[Fri May  4 10:40:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 10:40:45 2012] Assessing source extent using major
[Fri May  4 10:40:45 2012] Source does appear to be extended
[Fri May  4 10:40:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 10:42:25 2012] XMMSAS src. selection expression = ellipse(35248.919739, 12742.844391, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May  4 10:42:25 2012] Writing source region out to fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src109_src.reg
[Fri May  4 10:42:25 2012] Extracting stamp from image fullrun_pn_xmm0412990501_pi300-10000_cl_sm2.00.img.gz, (368, 110) - (443, 185)
[Fri May  4 10:42:26 2012] XMMSAS bgd. selection expression = annulus(35248.919739, 12742.844391, 1087.500000, 2175.000000, X, Y) && !ellipse(34210.296173, 15621.890457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37067.434265, 12151.187042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34471.341309, 15003.653610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36377.718719, 14723.549347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32419.732000, 17297.748000, 10672.656307, 10672.656307, 0.000000, X, Y) && !ellipse(32670.494000, 17832.852000, 3316.192095, 3316.192095, 0.000000, X, Y) && !ellipse(32900.466000, 16636.480000, 1778.776051, 1778.776051, 0.000000, X, Y) && !ellipse(32554.346000, 16583.814000, 1868.824054, 1868.824054, 0.000000, X, Y) && !ellipse(35347.827545, 15531.207932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35262.548004, 14991.907761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35751.734497, 14580.027756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35408.898529, 14057.312225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36835.225403, 13711.239777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37736.492000, 13098.586000, 2278.800066, 2278.800066, 0.000000, X, Y) && !ellipse(37840.679688, 12913.577377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38224.500000, 12375.776000, 2204.744063, 2204.744063, 0.000000, X, Y) && !ellipse(39131.784000, 11885.796000, 2248.344065, 2248.344065, 0.000000, X, Y) && !ellipse(38410.764000, 12158.506000, 2204.744063, 2204.744063, 0.000000, X, Y) && !ellipse(37520.812378, 11598.455078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39567.882000, 11487.436000, 2316.768067, 2316.768067, 0.000000, X, Y)
[Fri May  4 10:42:26 2012] Writing fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src109.gif
[Fri May  4 18:28:51 2012] Mean detx,y = (-6210.36, -13825.34) 
[Fri May  4 18:29:00 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May  4 18:30:20 2012] Binned source spectrum to 10 counts/bin
[Fri May  4 18:30:20 2012] Setting source spectrum file to fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src109_src_b10.pi.gz
[Fri May  4 18:30:20 2012] Setting bgd. spectrum file to fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src109_bgd.pi.gz
[Sat May  5 03:37:59 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May  5 03:37:59 2012] rmf not generated due to insufficient counts
[Sat May  5 23:27:05 2012] Updating aperture counts using extracted products
[Sat May  5 23:27:05 2012] Error reading totcts from fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src109_src_b10.pi.gz
[Sat May  5 23:27:11 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 23:27:11 2012] Using photon index=1.80, rate=0.00635, arf fullrun_pn_xmm0412990501_pi300-10000_pass1_cl_src109.arf
[Sat May  5 23:27:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 23:27:11 2012] Updating source flux to 5.7e-14
[Sat May  5 23:48:09 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting