[Tue May  1 11:53:35 2012] Detection parameters:
  Position = (428.9, 155.0) = 8 48 29.70 -45 42 13.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 136.4 +/- 23.2
  Background counts = 116.6
  Rate = 0.002 +/- 0.0004

[Tue May  1 11:53:36 2012] Off-axis axis estimate = 14.05'
[Wed May  2 08:13:27 2012] Using EEF radius (= 13.46 ")to estimate initial spatial extent for simple fitting
[Wed May  2 08:13:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  2 08:13:27 2012] Initial guess for spatial extent in simple fitting = 13.46"
[Wed May  2 08:13:27 2012] source mask rpix=3.1, npix_max = 51, mask sum = 56, frac = 1.084
[Wed May  2 08:13:27 2012] Giving source the simple spatial ID 69 for pass 0, mean size = 13.46"
[Wed May  2 17:36:33 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src69.ximg exists
[Wed May  2 17:36:33 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src69_1.ximg exists
[Wed May  2 17:36:33 2012] Fit fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src69 appears to have run properly
[Wed May  2 17:36:37 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src69.ximg exists
[Wed May  2 17:36:37 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src69_1.ximg exists
[Wed May  2 17:36:37 2012] Fit fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src69 appears to have run properly
[Wed May  2 17:38:16 2012] Spatial fit model total counts = 2360.400000, observed total counts = 2263.000000
[Wed May  2 17:38:16 2012] Offset between fit and detection position for source 70 = 1.170188 pixels
[Wed May  2 17:38:16 2012] Warning, changing simple spatial fit ID from 69 to 68
[Wed May  2 17:38:16 2012] 2131.561000 total counts/ 1457.650000 bgd. counts: snr = 17.651268
Spatial fit parameters:
  Offset between fit and detection position for source 70 = 1.170188 pixels
  Position = (429.9, 155.4) = 8 48 29.26 -45 42 11.1
  Extent = 26.3 (26.3-52.6)", rotation angle = 0
  Source counts = 673.9 +/- 46.2
  Background counts = 1457.7
  Rate = 0.01 +/- 0.0008
[Wed May  2 17:38:16 2012] Vigneting correction estimate = 1.000000
[Wed May  2 17:38:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 17:38:16 2012] Assessing source extent using major axis lower bound
[Wed May  2 17:38:16 2012] Source does appear to be extended
[Wed May  2 17:38:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 17:38:16 2012] Source is confused with source 36
[Thu May  3 22:42:53 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  3 22:42:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May  3 22:42:53 2012] Initial guess for spatial extent in simple fitting = 26.32"
[Thu May  3 22:42:53 2012] source mask rpix=6.1, npix_max = 171, mask sum = 169, frac = 0.984
[Thu May  3 22:42:53 2012] Giving source the simple spatial ID 60 for pass 1, mean size = 26.32"
[Fri May  4 10:40:01 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src60.ximg exists
[Fri May  4 10:40:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src60.csv
[Fri May  4 10:40:01 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src60_1.ximg exists
[Fri May  4 10:40:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src60.csv
[Fri May  4 10:40:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src60_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 10:40:02 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src60.ximg exists
[Fri May  4 10:40:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src60.csv
[Fri May  4 10:40:03 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src60_1.ximg exists
[Fri May  4 10:40:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src60.csv
[Fri May  4 10:40:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src60_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 10:41:40 2012] Warning, spatial fit 60 centroid is now closest to src. 68
[Fri May  4 10:41:40 2012] Vigneting correction estimate = 1.000000
[Fri May  4 10:41:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 10:41:40 2012] Assessing source extent using major axis lower bound
[Fri May  4 10:41:40 2012] Source does appear to be extended
[Fri May  4 10:41:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  5 12:16:43 2012] XMMSAS src. selection expression = ellipse(37355.884000, 13475.352000, 1579.488045, 1579.488045, 0.000000, X, Y)
[Sat May  5 12:16:43 2012] Writing source region out to fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src70_src.reg
[Sat May  5 12:16:43 2012] Extracting stamp from image fullrun_mos2_xmm0412990501_pi300-10000_cl_sm2.00.img.gz, (339, 65) - (521, 246)
[Sat May  5 12:16:43 2012] XMMSAS bgd. selection expression = annulus(37355.884000, 13475.352000, 2632.480076, 5264.960151, X, Y) && !ellipse(32697.678000, 17031.276000, 2439.352070, 2439.352070, 0.000000, X, Y) && !ellipse(31756.838000, 19005.774000, 965.296028, 965.296028, 0.000000, X, Y) && !ellipse(30993.200000, 18466.250000, 1674.504048, 1674.504048, 0.000000, X, Y) && !ellipse(32790.097107, 17522.627258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32239.560852, 18366.619919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29979.802000, 20208.488000, 3017.072087, 1861.904054, 43.896000, X, Y) && !ellipse(32150.588000, 17517.248000, 1761.568051, 1341.240039, 59.542000, X, Y) && !ellipse(34078.820000, 15826.586000, 1410.144041, 1410.144041, 0.000000, X, Y) && !ellipse(33273.023041, 17429.749023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33106.555359, 16156.476624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33787.618000, 16375.336000, 4028.192116, 4028.192116, 0.000000, X, Y) && !ellipse(36640.808000, 14179.286000, 2009.224058, 2009.224058, 0.000000, X, Y) && !ellipse(33909.698600, 17547.643200, 991.600029, 991.600029, 0.000000, X, Y) && !ellipse(36751.282000, 13965.946000, 2051.992059, 2051.992059, 0.000000, X, Y) && !ellipse(35712.728000, 15276.156000, 2054.872059, 2054.872059, 0.000000, X, Y) && !ellipse(34099.092926, 16846.851944, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35000.802000, 15849.928000, 3979.536115, 3070.648088, 50.322000, X, Y) && !ellipse(36398.611145, 14641.824890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35318.178000, 15260.346000, 4043.336116, 4043.336116, 0.000000, X, Y) && !ellipse(34369.006000, 15972.272000, 1944.912056, 1944.912056, 0.000000, X, Y) && !ellipse(36110.678000, 14781.450000, 1989.768057, 1989.768057, 0.000000, X, Y)
[Sat May  5 12:16:43 2012] Writing fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src70.gif
[Sat May  5 16:17:46 2012] Mean detx,y = (8390.51, 13282.88) 
[Sat May  5 16:17:50 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May  5 16:19:38 2012] Binned source spectrum to 10 counts/bin
[Sat May  5 16:19:38 2012] Setting source spectrum file to fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Sat May  5 16:19:38 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src70_bgd.pi.gz
[Sat May  5 23:27:24 2012] Updating aperture counts using extracted products
[Sat May  5 23:27:24 2012] Error reading totcts from fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Sat May  5 23:27:30 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 23:27:30 2012] Using photon index=1.80, rate=0.0115, arf fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src70.arf
[Sat May  5 23:27:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 23:27:30 2012] Updating source flux to 3.3e-13
[Sat May  5 23:37:48 2012] Flag c found in src. 70 procflags, skipping spectral fitting