[Tue May  1 11:53:34 2012] Detection parameters:
  Position = (412.2, 177.9) = 8 48 36.64 -45 40 32.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 135.8 +/- 23.8
  Background counts = 167.6
  Rate = 0.002 +/- 0.0004

[Tue May  1 11:53:36 2012] Off-axis axis estimate = 12.01'
[Wed May  2 08:13:27 2012] Using EEF radius (= 12.44 ")to estimate initial spatial extent for simple fitting
[Wed May  2 08:13:27 2012] Initial guess for spatial extent in simple fitting = 12.44"
[Wed May  2 08:13:27 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.931
[Wed May  2 08:13:27 2012] Giving source the simple spatial ID 70 for pass 0, mean size = 12.44"
[Wed May  2 17:36:33 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src70.ximg exists
[Wed May  2 17:36:33 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src70_1.ximg exists
[Wed May  2 17:36:33 2012] Fit fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src70 appears to have run properly
[Wed May  2 17:36:37 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src70.ximg exists
[Wed May  2 17:36:37 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src70_1.ximg exists
[Wed May  2 17:36:37 2012] Fit fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src70 appears to have run properly
[Wed May  2 17:38:16 2012] Spatial fit model total counts = 2499.670000, observed total counts = 2398.000000
[Wed May  2 17:38:16 2012] Offset between fit and detection position for source 64 = 2.994923 pixels
[Wed May  2 17:38:16 2012] Warning, changing simple spatial fit ID from 70 to 66
[Wed May  2 17:38:16 2012] 2329.713000 total counts/ 2116.280000 bgd. counts: snr = 4.639541
Spatial fit parameters:
  Offset between fit and detection position for source 64 = 2.994923 pixels
  Position = (411.8, 175.0) = 8 48 36.81 -45 40 46.4
  Extent = 26.0 (26.0-52.1)", rotation angle = 0
  Source counts = 213.4 +/- 48.3
  Background counts = 2116.3
  Rate = 0.004 +/- 0.0008
[Wed May  2 17:38:16 2012] Vigneting correction estimate = 1.000000
[Wed May  2 17:38:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 17:38:16 2012] Assessing source extent using major axis lower bound
[Wed May  2 17:38:16 2012] Source does appear to be extended
[Wed May  2 17:38:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 17:38:16 2012] Source is confused with source 36
[Thu May  3 22:42:53 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  3 22:42:53 2012] Initial guess for spatial extent in simple fitting = 26.03"
[Thu May  3 22:42:53 2012] source mask rpix=6.0, npix_max = 168, mask sum = 169, frac = 1.005
[Thu May  3 22:42:53 2012] Giving source the simple spatial ID 61 for pass 1, mean size = 26.03"
[Fri May  4 10:40:01 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src61.ximg exists
[Fri May  4 10:40:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src61.csv
[Fri May  4 10:40:01 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src61_1.ximg exists
[Fri May  4 10:40:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src61.csv
[Fri May  4 10:40:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 10:40:03 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src61.ximg exists
[Fri May  4 10:40:03 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src61_1.ximg exists
[Fri May  4 10:40:03 2012] Fit fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src61 appears to have run properly
[Fri May  4 10:41:40 2012] Warning, spatial fit 61 centroid is now closest to src. 61
[Fri May  4 10:41:40 2012] Spatial fit model total counts = 3905.180000, observed total counts = 3780.000000
[Fri May  4 10:41:40 2012] Offset between fit and detection position for source 64 = 1.387720 pixels
[Fri May  4 10:41:40 2012] Warning, changing simple spatial fit ID from 61 to 68
[Fri May  4 10:41:40 2012] 3850.711000 total counts/ 3162.290000 bgd. counts: snr = 12.242025
Spatial fit parameters:
  Offset between fit and detection position for source 64 = 1.387720 pixels
  Position = (411.0, 176.1) = 8 48 37.12 -45 40 41.3
  Extent = 25.7 (25.6-51.4)", rotation angle = 0
  Source counts = 688.4 +/- 62.1
  Background counts = 3162.3
  Rate = 0.01 +/- 0.001
[Fri May  4 10:41:40 2012] Vigneting correction estimate = 1.000000
[Fri May  4 10:41:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 10:41:40 2012] Assessing source extent using major axis lower bound
[Fri May  4 10:41:40 2012] Source does appear to be extended
[Fri May  4 10:41:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  5 12:16:43 2012] XMMSAS src. selection expression = ellipse(35712.728000, 15276.156000, 1541.154044, 1541.154044, 0.000000, X, Y)
[Sat May  5 12:16:43 2012] Writing source region out to fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src64_src.reg
[Sat May  5 12:16:43 2012] Extracting stamp from image fullrun_mos2_xmm0412990501_pi300-10000_cl_sm2.00.img.gz, (322, 88) - (500, 265)
[Sat May  5 12:16:43 2012] XMMSAS bgd. selection expression = annulus(35712.728000, 15276.156000, 2568.590074, 5137.180148, X, Y) && !ellipse(32697.678000, 17031.276000, 2439.352070, 2439.352070, 0.000000, X, Y) && !ellipse(31756.838000, 19005.774000, 965.296028, 965.296028, 0.000000, X, Y) && !ellipse(30993.200000, 18466.250000, 1674.504048, 1674.504048, 0.000000, X, Y) && !ellipse(32790.097107, 17522.627258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31095.630859, 19516.623291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30529.120000, 19982.968000, 1390.112040, 1390.112040, 0.000000, X, Y) && !ellipse(32239.560852, 18366.619919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29979.802000, 20208.488000, 3017.072087, 1861.904054, 43.896000, X, Y) && !ellipse(32150.588000, 17517.248000, 1761.568051, 1341.240039, 59.542000, X, Y) && !ellipse(29758.588000, 20658.012000, 1430.552041, 1430.552041, 0.000000, X, Y) && !ellipse(30129.506200, 20539.643400, 699.236820, 699.236820, 0.000000, X, Y) && !ellipse(34078.820000, 15826.586000, 1410.144041, 1410.144041, 0.000000, X, Y) && !ellipse(28847.442000, 20702.978000, 2780.928080, 2780.928080, 0.000000, X, Y) && !ellipse(33273.023041, 17429.749023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33106.555359, 16156.476624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33787.618000, 16375.336000, 4028.192116, 4028.192116, 0.000000, X, Y) && !ellipse(36640.808000, 14179.286000, 2009.224058, 2009.224058, 0.000000, X, Y) && !ellipse(33909.698600, 17547.643200, 991.600029, 991.600029, 0.000000, X, Y) && !ellipse(36751.282000, 13965.946000, 2051.992059, 2051.992059, 0.000000, X, Y) && !ellipse(37355.884000, 13475.352000, 2105.984061, 2105.984061, 0.000000, X, Y) && !ellipse(34099.092926, 16846.851944, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35000.802000, 15849.928000, 3979.536115, 3070.648088, 50.322000, X, Y) && !ellipse(36398.611145, 14641.824890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35318.178000, 15260.346000, 4043.336116, 4043.336116, 0.000000, X, Y) && !ellipse(34369.006000, 15972.272000, 1944.912056, 1944.912056, 0.000000, X, Y) && !ellipse(36110.678000, 14781.450000, 1989.768057, 1989.768057, 0.000000, X, Y)
[Sat May  5 12:16:43 2012] Writing fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src64.gif
[Sat May  5 16:20:06 2012] Mean detx,y = (7442.20, 11268.53) 
[Sat May  5 16:20:10 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May  5 16:21:40 2012] Binned source spectrum to 10 counts/bin
[Sat May  5 16:21:41 2012] Setting source spectrum file to fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src64_src_b10.pi.gz
[Sat May  5 16:21:41 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src64_bgd.pi.gz
[Sat May  5 23:27:24 2012] Updating aperture counts using extracted products
[Sat May  5 23:27:24 2012] Error reading totcts from fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src64_src_b10.pi.gz
[Sat May  5 23:27:30 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 23:27:30 2012] Using photon index=1.80, rate=0.0118, arf fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src64.arf
[Sat May  5 23:27:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 23:27:30 2012] Updating source flux to 2.7e-13
[Sat May  5 23:37:48 2012] Flag c found in src. 64 procflags, skipping spectral fitting