[Tue May  1 11:53:33 2012] Detection parameters:
  Position = (304.7, 197.0) = 8 49 21.25 -45 39 6.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 233.0 +/- 23.1
  Background counts = 299.3
  Rate = 0.007 +/- 0.0007

[Tue May  1 11:53:36 2012] Off-axis axis estimate = 7.37'
[Wed May  2 08:13:21 2012] Using EEF radius (= 10.11 ")to estimate initial spatial extent for simple fitting
[Wed May  2 08:13:21 2012] Initial guess for spatial extent in simple fitting = 10.11"
[Wed May  2 08:13:21 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.940
[Wed May  2 08:13:21 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 10.11"
[Wed May  2 17:36:31 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src13.ximg exists
[Wed May  2 17:36:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src13.csv
[Wed May  2 17:36:31 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src13_1.ximg exists
[Wed May  2 17:36:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src13.csv
[Wed May  2 17:36:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 17:36:33 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Wed May  2 17:36:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src13.csv
[Wed May  2 17:36:33 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Wed May  2 17:36:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src13.csv
[Wed May  2 17:36:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 17:38:15 2012] Warning, spatial fit 13 centroid is now closest to src. 50
[Wed May  2 17:38:16 2012] Vigneting correction estimate = 1.000000
[Wed May  2 17:38:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 17:38:16 2012] Assessing source extent using major
[Wed May  2 17:38:16 2012] Source does appear to be extended
[Wed May  2 17:38:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 22:42:53 2012] Using EEF radius (= 10.11 ")to estimate initial spatial extent for simple fitting
[Thu May  3 22:42:53 2012] Initial guess for spatial extent in simple fitting = 10.11"
[Thu May  3 22:42:53 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.940
[Thu May  3 22:42:53 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 10.11"
[Fri May  4 10:39:59 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src11.ximg exists
[Fri May  4 10:39:59 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src11.csv
[Fri May  4 10:39:59 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src11_1.ximg exists
[Fri May  4 10:39:59 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src11.csv
[Fri May  4 10:39:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 10:40:01 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Fri May  4 10:40:01 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src11.csv
[Fri May  4 10:40:01 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Fri May  4 10:40:01 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src11.csv
[Fri May  4 10:40:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 10:41:39 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 55 at 20.827370 pixels away
[Fri May  4 10:41:39 2012] Source 55 is offset by -5.179954 and -4.071877 pixels which is larger than
2 X fitted extent = 1.112970 x 1.112970, not incorporating fit results
[Fri May  4 10:41:40 2012] Vigneting correction estimate = 1.000000
[Fri May  4 10:41:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 10:41:40 2012] Assessing source extent using major
[Fri May  4 10:41:40 2012] Source does appear to be extended
[Fri May  4 10:41:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  5 12:16:40 2012] XMMSAS src. selection expression = ellipse(26462.471985, 17092.618713, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May  5 12:16:40 2012] Writing source region out to fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src55_src.reg
[Sat May  5 12:16:40 2012] Extracting stamp from image fullrun_mos2_xmm0412990501_pi300-10000_cl_sm2.00.img.gz, (267, 160) - (342, 235)
[Sat May  5 12:16:40 2012] XMMSAS bgd. selection expression = annulus(26462.471985, 17092.618713, 1087.500000, 2175.000000, X, Y) && !ellipse(27286.832000, 21241.414000, 2608.496075, 2005.456058, 47.432000, X, Y) && !ellipse(27808.828000, 20952.852000, 2710.288078, 2710.288078, 0.000000, X, Y) && !ellipse(29979.802000, 20208.488000, 3017.072087, 1861.904054, 43.896000, X, Y) && !ellipse(29758.588000, 20658.012000, 1430.552041, 1430.552041, 0.000000, X, Y) && !ellipse(25040.362000, 19232.506000, 1505.712043, 1505.712043, 0.000000, X, Y) && !ellipse(28454.875000, 19715.787659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26160.860657, 18109.071457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25123.600000, 18981.659000, 1401.592040, 1401.592040, 0.000000, X, Y) && !ellipse(28847.442000, 20702.978000, 2780.928080, 2780.928080, 0.000000, X, Y) && !ellipse(23739.072000, 20473.414000, 2794.336080, 2794.336080, 0.000000, X, Y) && !ellipse(24828.756000, 19508.552000, 2861.104082, 1339.640039, 48.550000, X, Y) && !ellipse(25649.154205, 18763.398117, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May  5 12:16:40 2012] Writing fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src55.gif
[Sat May  5 13:11:19 2012] Mean detx,y = (-757.73, 7101.00) 
[Sat May  5 13:11:23 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May  5 13:12:28 2012] Binned source spectrum to 10 counts/bin
[Sat May  5 13:12:29 2012] Setting source spectrum file to fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Sat May  5 13:12:29 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src55_bgd.pi.gz
[Sat May  5 18:08:37 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May  5 18:08:37 2012] rmf not generated due to insufficient counts
[Sat May  5 23:27:21 2012] Updating aperture counts using extracted products
[Sat May  5 23:27:21 2012] Error reading totcts from fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Sat May  5 23:27:26 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 23:27:26 2012] Using photon index=1.80, rate=0.00692, arf fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src55.arf
[Sat May  5 23:27:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 23:27:26 2012] Updating source flux to 1.1e-13
[Sat May  5 23:37:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting