[Tue May  1 11:53:33 2012] Detection parameters:
  Position = (301.3, 208.7) = 8 49 22.69 -45 38 13.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 146.1 +/- 23.8
  Background counts = 339.7
  Rate = 0.004 +/- 0.0007

[Tue May  1 11:53:36 2012] Off-axis axis estimate = 6.51'
[Wed May  2 08:13:23 2012] Using EEF radius (= 9.68 ")to estimate initial spatial extent for simple fitting
[Wed May  2 08:13:23 2012] Initial guess for spatial extent in simple fitting = 9.68"
[Wed May  2 08:13:23 2012] source mask rpix=2.2, npix_max = 29, mask sum = 20, frac = 0.673
[Wed May  2 08:13:23 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 9.68"
[Wed May  2 17:36:31 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src29.ximg exists
[Wed May  2 17:36:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src29.csv
[Wed May  2 17:36:31 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src29_1.ximg exists
[Wed May  2 17:36:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src29.csv
[Wed May  2 17:36:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 17:36:34 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Wed May  2 17:36:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src29.csv
[Wed May  2 17:36:34 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Wed May  2 17:36:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src29.csv
[Wed May  2 17:36:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 17:38:15 2012] Source 50 is offset by -4.047887 and 1.589580 pixels which is larger than
2 X fitted extent = 1.173361 x 1.173361, not incorporating fit results
[Wed May  2 17:38:16 2012] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 50 at 11.647569 pixels away
[Wed May  2 17:38:16 2012] Vigneting correction estimate = 1.000000
[Wed May  2 17:38:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 17:38:16 2012] Assessing source extent using major
[Wed May  2 17:38:16 2012] Source does appear to be extended
[Wed May  2 17:38:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 22:42:53 2012] Using EEF radius (= 9.68 ")to estimate initial spatial extent for simple fitting
[Thu May  3 22:42:53 2012] Initial guess for spatial extent in simple fitting = 9.68"
[Thu May  3 22:42:53 2012] source mask rpix=2.2, npix_max = 29, mask sum = 20, frac = 0.673
[Thu May  3 22:42:53 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 9.68"
[Fri May  4 10:40:00 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src25.ximg exists
[Fri May  4 10:40:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src25.csv
[Fri May  4 10:40:00 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src25_1.ximg exists
[Fri May  4 10:40:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src25.csv
[Fri May  4 10:40:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 10:40:02 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Fri May  4 10:40:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src25.csv
[Fri May  4 10:40:02 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Fri May  4 10:40:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src25.csv
[Fri May  4 10:40:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 10:41:39 2012] Warning, spatial fit 25 centroid is now closest to src. 55
[Fri May  4 10:41:40 2012] Source 50 is offset by -2.396475 and 0.361212 pixels which is larger than
2 X fitted extent = 1.081687 x 1.081687, not incorporating fit results
[Fri May  4 10:41:40 2012] Vigneting correction estimate = 1.000000
[Fri May  4 10:41:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 10:41:40 2012] Assessing source extent using major
[Fri May  4 10:41:40 2012] Source does appear to be extended
[Fri May  4 10:41:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 10:41:40 2012] Source is confused with source 42
[Sat May  5 12:16:41 2012] XMMSAS src. selection expression = ellipse(26160.860657, 18109.071457, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May  5 12:16:41 2012] Writing source region out to fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src50_src.reg
[Sat May  5 12:16:41 2012] Extracting stamp from image fullrun_mos2_xmm0412990501_pi300-10000_cl_sm2.00.img.gz, (264, 171) - (339, 246)
[Sat May  5 12:16:41 2012] XMMSAS bgd. selection expression = annulus(26160.860657, 18109.071457, 1087.500000, 2175.000000, X, Y) && !ellipse(27286.832000, 21241.414000, 2608.496075, 2005.456058, 47.432000, X, Y) && !ellipse(28434.812000, 21202.876000, 1423.464041, 1423.464041, 0.000000, X, Y) && !ellipse(26462.471985, 17092.618713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27808.828000, 20952.852000, 2710.288078, 2710.288078, 0.000000, X, Y) && !ellipse(29979.802000, 20208.488000, 3017.072087, 1861.904054, 43.896000, X, Y) && !ellipse(27268.086000, 21355.452000, 1394.824040, 1394.824040, 0.000000, X, Y) && !ellipse(28723.848000, 21271.258000, 1430.552041, 1430.552041, 0.000000, X, Y) && !ellipse(29758.588000, 20658.012000, 1430.552041, 1430.552041, 0.000000, X, Y) && !ellipse(25040.362000, 19232.506000, 1505.712043, 1505.712043, 0.000000, X, Y) && !ellipse(24252.802000, 20352.974000, 987.480028, 987.480028, 0.000000, X, Y) && !ellipse(28454.875000, 19715.787659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25123.600000, 18981.659000, 1401.592040, 1401.592040, 0.000000, X, Y) && !ellipse(28847.442000, 20702.978000, 2780.928080, 2780.928080, 0.000000, X, Y) && !ellipse(23739.072000, 20473.414000, 2794.336080, 2794.336080, 0.000000, X, Y) && !ellipse(24828.756000, 19508.552000, 2861.104082, 1339.640039, 48.550000, X, Y) && !ellipse(25649.154205, 18763.398117, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May  5 12:16:41 2012] Writing fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src50.gif
[Sat May  5 14:11:37 2012] Mean detx,y = (-836.19, 5875.67) 
[Sat May  5 14:11:40 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May  5 14:12:31 2012] Binned source spectrum to 10 counts/bin
[Sat May  5 14:12:31 2012] Setting source spectrum file to fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Sat May  5 14:12:31 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Sat May  5 19:25:11 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May  5 19:25:11 2012] rmf not generated due to insufficient counts
[Sat May  5 23:27:22 2012] Updating aperture counts using extracted products
[Sat May  5 23:27:22 2012] Error reading totcts from fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Sat May  5 23:27:27 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 23:27:27 2012] Using photon index=1.80, rate=0.00408, arf fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src50.arf
[Sat May  5 23:27:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 23:27:28 2012] Updating source flux to 5.9e-14
[Sat May  5 23:37:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting