[Tue May  1 11:53:32 2012] Detection parameters:
  Position = (351.2, 229.9) = 8 49 1.98 -45 36 47.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 317.2 +/- 33.4
  Background counts = 297.6
  Rate = 0.008 +/- 0.0008

[Tue May  1 11:53:36 2012] Off-axis axis estimate = 6.27'
[Wed May  2 08:13:21 2012] Using EEF radius (= 9.56 ")to estimate initial spatial extent for simple fitting
[Wed May  2 08:13:21 2012] Initial guess for spatial extent in simple fitting = 9.56"
[Wed May  2 08:13:21 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.030
[Wed May  2 08:13:21 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 9.56"
[Wed May  2 17:36:31 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src12.ximg exists
[Wed May  2 17:36:31 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src12_1.ximg exists
[Wed May  2 17:36:31 2012] Fit fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src12 appears to have run properly
[Wed May  2 17:36:33 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Wed May  2 17:36:33 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Wed May  2 17:36:33 2012] Fit fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Wed May  2 17:38:15 2012] Spatial fit model total counts = 4323.800000, observed total counts = 3855.000000
[Wed May  2 17:38:15 2012] Poor agreement between spatial fit and data for source 43
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May  2 17:38:15 2012] Warning, spatial fit 12 centroid is now closest to src. 39
[Wed May  2 17:38:16 2012] Spatial fit model total counts = 4963.920000, observed total counts = 4955.000000
[Wed May  2 17:38:16 2012] Offset between fit and detection position for source 43 = 3.039341 pixels
[Wed May  2 17:38:16 2012] Warning, changing simple spatial fit ID from 12 to 17
[Wed May  2 17:38:16 2012] 4840.912000 total counts/ 4327.000000 bgd. counts: snr = 7.812595
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 3.039341 pixels
  Position = (352.4, 227.1) = 8 49 1.47 -45 36 59.9
  Extent = 18.9 (18.8-37.7)", rotation angle = 0
  Source counts = 513.9 +/- 69.6
  Background counts = 4327.0
  Rate = 0.009 +/- 0.001
[Wed May  2 17:38:16 2012] Vigneting correction estimate = 1.000000
[Wed May  2 17:38:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 17:38:16 2012] Assessing source extent using major axis lower bound
[Wed May  2 17:38:16 2012] Source does appear to be extended
[Wed May  2 17:38:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 17:38:16 2012] Source is confused with source 8
[Thu May  3 22:42:53 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  3 22:42:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May  3 22:42:53 2012] Initial guess for spatial extent in simple fitting = 18.86"
[Thu May  3 22:42:53 2012] source mask rpix=4.3, npix_max = 93, mask sum = 90, frac = 0.963
[Thu May  3 22:42:53 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 18.86"
[Fri May  4 10:39:59 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src10.ximg exists
[Fri May  4 10:39:59 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src10_1.ximg exists
[Fri May  4 10:39:59 2012] Fit fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src10 appears to have run properly
[Fri May  4 10:40:01 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Fri May  4 10:40:01 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Fri May  4 10:40:01 2012] Fit fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Fri May  4 10:41:39 2012] Warning, spatial fit 10 centroid is now closest to src. 46
[Fri May  4 10:41:39 2012] Spatial fit model total counts = 4315.060000, observed total counts = 4311.000000
[Fri May  4 10:41:39 2012] Offset between fit and detection position for source 43 = 3.262165 pixels
[Fri May  4 10:41:39 2012] Warning, changing simple spatial fit ID from 10 to 24
[Fri May  4 10:41:39 2012] 3446.935000 total counts/ 2965.350000 bgd. counts: snr = 8.843720
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 3.262165 pixels
  Position = (351.5, 230.2) = 8 49 1.87 -45 36 46.4
  Extent = 17.4 (17.2-17.5)", rotation angle = 0
  Source counts = 481.6 +/- 58.7
  Background counts = 2965.3
  Rate = 0.008 +/- 0.001
[Fri May  4 10:41:40 2012] Vigneting correction estimate = 1.000000
[Fri May  4 10:41:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 10:41:40 2012] Assessing source extent using major axis lower bound
[Fri May  4 10:41:40 2012] Source does appear to be extended
[Fri May  4 10:41:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  5 12:16:40 2012] XMMSAS src. selection expression = ellipse(30529.120000, 19982.968000, 1042.584030, 1042.584030, 0.000000, X, Y)
[Sat May  5 12:16:40 2012] Writing source region out to fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src43_src.reg
[Sat May  5 12:16:40 2012] Extracting stamp from image fullrun_mos2_xmm0412990501_pi300-10000_cl_sm2.00.img.gz, (292, 170) - (411, 290)
[Sat May  5 12:16:40 2012] XMMSAS bgd. selection expression = annulus(30529.120000, 19982.968000, 1737.640050, 3475.280100, X, Y) && !ellipse(27286.832000, 21241.414000, 2608.496075, 2005.456058, 47.432000, X, Y) && !ellipse(28434.812000, 21202.876000, 1423.464041, 1423.464041, 0.000000, X, Y) && !ellipse(32697.678000, 17031.276000, 2439.352070, 2439.352070, 0.000000, X, Y) && !ellipse(31756.838000, 19005.774000, 965.296028, 965.296028, 0.000000, X, Y) && !ellipse(30993.200000, 18466.250000, 1674.504048, 1674.504048, 0.000000, X, Y) && !ellipse(32790.097107, 17522.627258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31095.630859, 19516.623291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26462.471985, 17092.618713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32239.560852, 18366.619919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27808.828000, 20952.852000, 2710.288078, 2710.288078, 0.000000, X, Y) && !ellipse(29979.802000, 20208.488000, 3017.072087, 1861.904054, 43.896000, X, Y) && !ellipse(27268.086000, 21355.452000, 1394.824040, 1394.824040, 0.000000, X, Y) && !ellipse(32150.588000, 17517.248000, 1761.568051, 1341.240039, 59.542000, X, Y) && !ellipse(28723.848000, 21271.258000, 1430.552041, 1430.552041, 0.000000, X, Y) && !ellipse(29758.588000, 20658.012000, 1430.552041, 1430.552041, 0.000000, X, Y) && !ellipse(28454.875000, 19715.787659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30129.506200, 20539.643400, 699.236820, 699.236820, 0.000000, X, Y) && !ellipse(26540.472000, 21660.708000, 1304.248038, 1304.248038, 0.000000, X, Y) && !ellipse(34078.820000, 15826.586000, 1410.144041, 1410.144041, 0.000000, X, Y) && !ellipse(28847.442000, 20702.978000, 2780.928080, 2780.928080, 0.000000, X, Y) && !ellipse(24828.756000, 19508.552000, 2861.104082, 1339.640039, 48.550000, X, Y) && !ellipse(33273.023041, 17429.749023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33106.555359, 16156.476624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33787.618000, 16375.336000, 4028.192116, 4028.192116, 0.000000, X, Y) && !ellipse(33909.698600, 17547.643200, 991.600029, 991.600029, 0.000000, X, Y) && !ellipse(35712.728000, 15276.156000, 2054.872059, 2054.872059, 0.000000, X, Y) && !ellipse(34099.092926, 16846.851944, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35000.802000, 15849.928000, 3979.536115, 3070.648088, 50.322000, X, Y) && !ellipse(35318.178000, 15260.346000, 4043.336116, 4043.336116, 0.000000, X, Y) && !ellipse(34369.006000, 15972.272000, 1944.912056, 1944.912056, 0.000000, X, Y)
[Sat May  5 12:16:40 2012] Writing fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src43.gif
[Sat May  5 13:09:34 2012] Mean detx,y = (3849.05, 5408.08) 
[Sat May  5 13:09:39 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May  5 13:10:54 2012] Binned source spectrum to 10 counts/bin
[Sat May  5 13:10:54 2012] Setting source spectrum file to fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Sat May  5 13:10:54 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Sat May  5 23:27:21 2012] Updating aperture counts using extracted products
[Sat May  5 23:27:21 2012] Error reading totcts from fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Sat May  5 23:27:26 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 23:27:26 2012] Using photon index=1.80, rate=0.00823, arf fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src43.arf
[Sat May  5 23:27:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 23:27:26 2012] Updating source flux to 1.1e-13
[Sat May  5 23:37:48 2012] Flag p found in src. 43 procflags, skipping spectral fitting
[Sat May  5 23:37:48 2012] Flag c found in src. 43 procflags, skipping spectral fitting