[Tue May  1 11:53:32 2012] Detection parameters:
  Position = (347.7, 235.9) = 8 49 3.44 -45 36 24.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 216.0 +/- 30.6
  Background counts = 298.0
  Rate = 0.005 +/- 0.0007

[Tue May  1 11:53:36 2012] Off-axis axis estimate = 5.77'
[Wed May  2 08:13:23 2012] Using EEF radius (= 9.31 ")to estimate initial spatial extent for simple fitting
[Wed May  2 08:13:23 2012] Initial guess for spatial extent in simple fitting = 9.31"
[Wed May  2 08:13:23 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.075
[Wed May  2 08:13:23 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 9.31"
[Wed May  2 17:36:31 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src27.ximg exists
[Wed May  2 17:36:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src27.csv
[Wed May  2 17:36:31 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src27_1.ximg exists
[Wed May  2 17:36:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src27.csv
[Wed May  2 17:36:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 17:36:34 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Wed May  2 17:36:34 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Wed May  2 17:36:34 2012] Fit fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Wed May  2 17:38:15 2012] Spatial fit model total counts = 4625.180000, observed total counts = 4638.000000
[Wed May  2 17:38:15 2012] Offset between fit and detection position for source 39 = 1.741008 pixels
[Wed May  2 17:38:15 2012] Warning, changing simple spatial fit ID from 27 to 12
[Wed May  2 17:38:15 2012] 4487.680000 total counts/ 3416.210000 bgd. counts: snr = 18.331911
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 1.741008 pixels
  Position = (346.0, 235.5) = 8 49 4.15 -45 36 23.4
  Extent = 19.1 (19.1-38.3)", rotation angle = 0
  Source counts = 1071.5 +/- 67.0
  Background counts = 3416.2
  Rate = 0.02 +/- 0.001
[Wed May  2 17:38:16 2012] Spatial fit model total counts = 4124.620000, observed total counts = 4123.000000
[Wed May  2 17:38:16 2012] Offset between fit and detection position for source 39 = 1.428294 pixels
[Wed May  2 17:38:16 2012] Warning, changing simple spatial fit ID from 12 to 27
[Wed May  2 17:38:16 2012] 3696.369000 total counts/ 3521.420000 bgd. counts: snr = 2.948170
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 1.428294 pixels
  Position = (346.9, 236.6) = 8 49 3.78 -45 36 18.6
  Extent = 8.7 (5.9-13.7)", rotation angle = 0
  Source counts = 174.9 +/- 60.8
  Background counts = 3521.4
  Rate = 0.003 +/- 0.001
[Wed May  2 17:38:16 2012] Vigneting correction estimate = 1.000000
[Wed May  2 17:38:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 17:38:16 2012] Assessing source extent using major axis lower bound
[Wed May  2 17:38:16 2012] Source does appear to be extended
[Wed May  2 17:38:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 17:38:16 2012] Source is confused with source 46
[Thu May  3 22:42:53 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  3 22:42:53 2012] Initial guess for spatial extent in simple fitting = 8.74"
[Thu May  3 22:42:53 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.993
[Thu May  3 22:42:53 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 8.74"
[Fri May  4 10:39:59 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src24.ximg exists
[Fri May  4 10:40:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src24.csv
[Fri May  4 10:40:00 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src24_1.ximg exists
[Fri May  4 10:40:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src24.csv
[Fri May  4 10:40:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 10:40:02 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Fri May  4 10:40:02 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Fri May  4 10:40:02 2012] Fit fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Fri May  4 10:41:39 2012] Spatial fit model total counts = 4293.230000, observed total counts = 3855.000000
[Fri May  4 10:41:39 2012] Poor agreement between spatial fit and data for source 39
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May  4 10:41:39 2012] Warning, spatial fit 24 centroid is now closest to src. 43
[Fri May  4 10:41:40 2012] Vigneting correction estimate = 1.000000
[Fri May  4 10:41:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 10:41:40 2012] Assessing source extent using major axis lower bound
[Fri May  4 10:41:40 2012] Source does appear to be extended
[Fri May  4 10:41:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  5 12:16:41 2012] XMMSAS src. selection expression = ellipse(30129.506200, 20539.643400, 524.427615, 524.427615, 0.000000, X, Y)
[Sat May  5 12:16:41 2012] Writing source region out to fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src39_src.reg
[Sat May  5 12:16:41 2012] Extracting stamp from image fullrun_mos2_xmm0412990501_pi300-10000_cl_sm2.00.img.gz, (317, 207) - (377, 267)
[Sat May  5 12:16:41 2012] XMMSAS bgd. selection expression = annulus(30129.506200, 20539.643400, 874.046025, 1748.092050, X, Y) && !ellipse(27286.832000, 21241.414000, 2608.496075, 2005.456058, 47.432000, X, Y) && !ellipse(28434.812000, 21202.876000, 1423.464041, 1423.464041, 0.000000, X, Y) && !ellipse(32697.678000, 17031.276000, 2439.352070, 2439.352070, 0.000000, X, Y) && !ellipse(31756.838000, 19005.774000, 965.296028, 965.296028, 0.000000, X, Y) && !ellipse(30993.200000, 18466.250000, 1674.504048, 1674.504048, 0.000000, X, Y) && !ellipse(31095.630859, 19516.623291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30529.120000, 19982.968000, 1390.112040, 1390.112040, 0.000000, X, Y) && !ellipse(32239.560852, 18366.619919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27808.828000, 20952.852000, 2710.288078, 2710.288078, 0.000000, X, Y) && !ellipse(29979.802000, 20208.488000, 3017.072087, 1861.904054, 43.896000, X, Y) && !ellipse(27268.086000, 21355.452000, 1394.824040, 1394.824040, 0.000000, X, Y) && !ellipse(32150.588000, 17517.248000, 1761.568051, 1341.240039, 59.542000, X, Y) && !ellipse(28723.848000, 21271.258000, 1430.552041, 1430.552041, 0.000000, X, Y) && !ellipse(29758.588000, 20658.012000, 1430.552041, 1430.552041, 0.000000, X, Y) && !ellipse(28454.875000, 19715.787659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28847.442000, 20702.978000, 2780.928080, 2780.928080, 0.000000, X, Y) && !ellipse(33787.618000, 16375.336000, 4028.192116, 4028.192116, 0.000000, X, Y) && !ellipse(35000.802000, 15849.928000, 3979.536115, 3070.648088, 50.322000, X, Y) && !ellipse(35318.178000, 15260.346000, 4043.336116, 4043.336116, 0.000000, X, Y)
[Sat May  5 12:16:41 2012] Writing fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src39.gif
[Sat May  5 14:10:34 2012] Mean detx,y = (3677.54, 4750.04) 
[Sat May  5 14:10:38 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May  5 14:11:12 2012] Binned source spectrum to 10 counts/bin
[Sat May  5 14:11:12 2012] Setting source spectrum file to fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Sat May  5 14:11:12 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Sat May  5 23:27:22 2012] Updating aperture counts using extracted products
[Sat May  5 23:27:22 2012] Error reading totcts from fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Sat May  5 23:27:27 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 23:27:27 2012] Using photon index=1.80, rate=0.00299, arf fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src39.arf
[Sat May  5 23:27:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 23:27:27 2012] Updating source flux to 4.4e-14
[Sat May  5 23:37:48 2012] Flag p found in src. 39 procflags, skipping spectral fitting
[Sat May  5 23:37:48 2012] Flag c found in src. 39 procflags, skipping spectral fitting