[Tue May  1 11:53:32 2012] Detection parameters:
  Position = (331.4, 238.9) = 8 49 10.19 -45 36 8.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 253.6 +/- 32.5
  Background counts = 320.7
  Rate = 0.005 +/- 0.0007

[Tue May  1 11:53:36 2012] Off-axis axis estimate = 4.94'
[Wed May  2 08:13:22 2012] Using EEF radius (= 8.90 ")to estimate initial spatial extent for simple fitting
[Wed May  2 08:13:22 2012] Initial guess for spatial extent in simple fitting = 8.90"
[Wed May  2 08:13:22 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.965
[Wed May  2 08:13:22 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 8.90"
[Wed May  2 17:36:31 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src21.ximg exists
[Wed May  2 17:36:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src21.csv
[Wed May  2 17:36:31 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src21_1.ximg exists
[Wed May  2 17:36:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src21.csv
[Wed May  2 17:36:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 17:36:34 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Wed May  2 17:36:34 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Wed May  2 17:36:34 2012] Fit fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Wed May  2 17:38:16 2012] Warning, spatial fit 21 centroid is now closest to src. 32
[Wed May  2 17:38:16 2012] Vigneting correction estimate = 1.000000
[Wed May  2 17:38:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 17:38:16 2012] Assessing source extent using major
[Wed May  2 17:38:16 2012] Source does appear to be extended
[Wed May  2 17:38:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 17:38:16 2012] Source is confused with source 40
[Wed May  2 17:38:16 2012] Source is confused with source 34
[Wed May  2 17:38:16 2012] Source is confused with source 32
[Thu May  3 22:42:53 2012] Using EEF radius (= 8.90 ")to estimate initial spatial extent for simple fitting
[Thu May  3 22:42:53 2012] Initial guess for spatial extent in simple fitting = 8.90"
[Thu May  3 22:42:53 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.965
[Thu May  3 22:42:53 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 8.90"
[Fri May  4 10:39:59 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src18.ximg exists
[Fri May  4 10:39:59 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src18_1.ximg exists
[Fri May  4 10:39:59 2012] Fit fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src18 appears to have run properly
[Fri May  4 10:40:01 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Fri May  4 10:40:01 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Fri May  4 10:40:01 2012] Fit fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Fri May  4 10:41:39 2012] Warning, spatial fit 18 centroid is now closest to src. 7
[Fri May  4 10:41:39 2012] Spatial fit model total counts = 10084.100000, observed total counts = 10080.000000
[Fri May  4 10:41:39 2012] Offset between fit and detection position for source 37 = 4.160951 pixels
[Fri May  4 10:41:39 2012] Warning, changing simple spatial fit ID from 18 to 20
[Fri May  4 10:41:39 2012] 9728.400000 total counts/ 7466.820000 bgd. counts: snr = 26.172434
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 4.160951 pixels
  Position = (332.0, 243.0) = 8 49 9.95 -45 35 51.1
  Extent = 35.8 (35.7-71.5)", rotation angle = 0
  Source counts = 2261.6 +/- 98.6
  Background counts = 7466.8
  Rate = 0.04 +/- 0.002
[Fri May  4 10:41:39 2012] Spatial fit model total counts = 4273.720000, observed total counts = 4279.000000
[Fri May  4 10:41:39 2012] Offset between fit and detection position for source 37 = 2.440224 pixels
[Fri May  4 10:41:39 2012] Warning, changing simple spatial fit ID from 20 to 30
[Fri May  4 10:41:39 2012] 4139.223000 total counts/ 3674.200000 bgd. counts: snr = 7.671725
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 2.440224 pixels
  Position = (330.7, 245.1) = 8 49 10.48 -45 35 42.1
  Extent = 17.9 (17.8-35.8)", rotation angle = 0
  Source counts = 465.0 +/- 64.3
  Background counts = 3674.2
  Rate = 0.008 +/- 0.001
[Fri May  4 10:41:40 2012] Vigneting correction estimate = 1.000000
[Fri May  4 10:41:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 10:41:40 2012] Assessing source extent using major axis lower bound
[Fri May  4 10:41:40 2012] Source does appear to be extended
[Fri May  4 10:41:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  5 12:16:41 2012] XMMSAS src. selection expression = ellipse(28723.848000, 21271.258000, 1072.914031, 1072.914031, 0.000000, X, Y)
[Sat May  5 12:16:41 2012] Writing source region out to fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src37_src.reg
[Sat May  5 12:16:41 2012] Extracting stamp from image fullrun_mos2_xmm0412990501_pi300-10000_cl_sm2.00.img.gz, (269, 183) - (392, 307)
[Sat May  5 12:16:41 2012] XMMSAS bgd. selection expression = annulus(28723.848000, 21271.258000, 1788.190051, 3576.380103, X, Y) && !ellipse(27286.832000, 21241.414000, 2608.496075, 2005.456058, 47.432000, X, Y) && !ellipse(28434.812000, 21202.876000, 1423.464041, 1423.464041, 0.000000, X, Y) && !ellipse(32697.678000, 17031.276000, 2439.352070, 2439.352070, 0.000000, X, Y) && !ellipse(31756.838000, 19005.774000, 965.296028, 965.296028, 0.000000, X, Y) && !ellipse(30993.200000, 18466.250000, 1674.504048, 1674.504048, 0.000000, X, Y) && !ellipse(32790.097107, 17522.627258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31095.630859, 19516.623291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30529.120000, 19982.968000, 1390.112040, 1390.112040, 0.000000, X, Y) && !ellipse(26462.471985, 17092.618713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32239.560852, 18366.619919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27808.828000, 20952.852000, 2710.288078, 2710.288078, 0.000000, X, Y) && !ellipse(29979.802000, 20208.488000, 3017.072087, 1861.904054, 43.896000, X, Y) && !ellipse(27268.086000, 21355.452000, 1394.824040, 1394.824040, 0.000000, X, Y) && !ellipse(32150.588000, 17517.248000, 1761.568051, 1341.240039, 59.542000, X, Y) && !ellipse(29758.588000, 20658.012000, 1430.552041, 1430.552041, 0.000000, X, Y) && !ellipse(25040.362000, 19232.506000, 1505.712043, 1505.712043, 0.000000, X, Y) && !ellipse(24252.802000, 20352.974000, 987.480028, 987.480028, 0.000000, X, Y) && !ellipse(28454.875000, 19715.787659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30129.506200, 20539.643400, 699.236820, 699.236820, 0.000000, X, Y) && !ellipse(26160.860657, 18109.071457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26540.472000, 21660.708000, 1304.248038, 1304.248038, 0.000000, X, Y) && !ellipse(25123.600000, 18981.659000, 1401.592040, 1401.592040, 0.000000, X, Y) && !ellipse(28847.442000, 20702.978000, 2780.928080, 2780.928080, 0.000000, X, Y) && !ellipse(25527.014893, 22824.500397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23739.072000, 20473.414000, 2794.336080, 2794.336080, 0.000000, X, Y) && !ellipse(24828.756000, 19508.552000, 2861.104082, 1339.640039, 48.550000, X, Y) && !ellipse(24567.888214, 22747.451447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25649.154205, 18763.398117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33787.618000, 16375.336000, 4028.192116, 4028.192116, 0.000000, X, Y) && !ellipse(25668.923553, 21965.401947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35000.802000, 15849.928000, 3979.536115, 3070.648088, 50.322000, X, Y) && !ellipse(35318.178000, 15260.346000, 4043.336116, 4043.336116, 0.000000, X, Y)
[Sat May  5 12:16:41 2012] Writing fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src37.gif
[Sat May  5 14:03:16 2012] Mean detx,y = (2492.46, 3705.03) 
[Sat May  5 14:03:20 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May  5 14:04:19 2012] Binned source spectrum to 10 counts/bin
[Sat May  5 14:04:19 2012] Setting source spectrum file to fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Sat May  5 14:04:19 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Sat May  5 23:27:21 2012] Updating aperture counts using extracted products
[Sat May  5 23:27:21 2012] Error reading totcts from fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Sat May  5 23:27:27 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 23:27:27 2012] Using photon index=1.80, rate=0.00794, arf fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src37.arf
[Sat May  5 23:27:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 23:27:27 2012] Updating source flux to 9.3e-14
[Sat May  5 23:37:48 2012] Flag c found in src. 37 procflags, skipping spectral fitting