[Tue May  1 11:53:31 2012] Detection parameters:
  Position = (337.2, 241.0) = 8 49 7.81 -45 35 54.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 164.2 +/- 29.0
  Background counts = 307.1
  Rate = 0.004 +/- 0.0006

[Tue May  1 11:53:36 2012] Off-axis axis estimate = 5.02'
[Wed May  2 08:13:24 2012] Using EEF radius (= 8.94 ")to estimate initial spatial extent for simple fitting
[Wed May  2 08:13:24 2012] Initial guess for spatial extent in simple fitting = 8.94"
[Wed May  2 08:13:24 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.149
[Wed May  2 08:13:24 2012] Giving source the simple spatial ID 36 for pass 0, mean size = 8.94"
[Wed May  2 17:36:32 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src36.ximg exists
[Wed May  2 17:36:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src36.csv
[Wed May  2 17:36:32 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src36_1.ximg exists
[Wed May  2 17:36:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src36.csv
[Wed May  2 17:36:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 17:36:35 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Wed May  2 17:36:35 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Wed May  2 17:36:35 2012] Fit fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src36 appears to have run properly
[Wed May  2 17:38:16 2012] Warning, spatial fit 36 centroid is now closest to src. 40
[Wed May  2 17:38:16 2012] Vigneting correction estimate = 1.000000
[Wed May  2 17:38:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 17:38:16 2012] Assessing source extent using major
[Wed May  2 17:38:16 2012] Source does appear to be extended
[Wed May  2 17:38:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 17:38:16 2012] Source is confused with source 46
[Thu May  3 22:42:53 2012] Using EEF radius (= 8.94 ")to estimate initial spatial extent for simple fitting
[Thu May  3 22:42:53 2012] Initial guess for spatial extent in simple fitting = 8.94"
[Thu May  3 22:42:53 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.149
[Thu May  3 22:42:53 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 8.94"
[Fri May  4 10:40:00 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src30.ximg exists
[Fri May  4 10:40:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src30.csv
[Fri May  4 10:40:00 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src30_1.ximg exists
[Fri May  4 10:40:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src30.csv
[Fri May  4 10:40:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 10:40:02 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Fri May  4 10:40:02 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Fri May  4 10:40:02 2012] Fit fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Fri May  4 10:41:39 2012] Warning, spatial fit 30 centroid is now closest to src. 37
[Fri May  4 10:41:39 2012] Spatial fit model total counts = 9787.670000, observed total counts = 9677.000000
[Fri May  4 10:41:39 2012] Offset between fit and detection position for source 34 = 5.573468 pixels
[Fri May  4 10:41:39 2012] Warning, changing simple spatial fit ID from 30 to 31
[Fri May  4 10:41:39 2012] 9087.220000 total counts/ 6848.660000 bgd. counts: snr = 27.049917
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 5.573468 pixels
  Position = (332.1, 238.5) = 8 49 9.89 -45 36 10.5
  Extent = 34.8 (34.7-69.5)", rotation angle = 0
  Source counts = 2238.6 +/- 95.3
  Background counts = 6848.7
  Rate = 0.04 +/- 0.002
[Fri May  4 10:41:40 2012] Vigneting correction estimate = 1.000000
[Fri May  4 10:41:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 10:41:40 2012] Assessing source extent using major axis lower bound
[Fri May  4 10:41:40 2012] Source does appear to be extended
[Fri May  4 10:41:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  5 12:16:41 2012] Counts = 2238.560000, rescaling region sizes by 2.000000
[Sat May  5 12:16:41 2012] XMMSAS src. selection expression = ellipse(28847.442000, 20702.978000, 4171.392120, 4171.392120, 0.000000, X, Y)
[Sat May  5 12:16:41 2012] Writing source region out to fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src34_src.reg
[Sat May  5 12:16:41 2012] Extracting stamp from image fullrun_mos2_xmm0412990501_pi300-10000_cl_sm2.00.img.gz, (92, 0) - (572, 478)
[Sat May  5 12:16:42 2012] XMMSAS bgd. selection expression = annulus(28847.442000, 20702.978000, 13904.640400, 27809.280800, X, Y) && !ellipse(27286.832000, 21241.414000, 2608.496075, 2005.456058, 47.432000, X, Y) && !ellipse(28434.812000, 21202.876000, 1423.464041, 1423.464041, 0.000000, X, Y) && !ellipse(19080.238200, 26021.154600, 247.292807, 247.292807, 0.000000, X, Y) && !ellipse(32697.678000, 17031.276000, 2439.352070, 2439.352070, 0.000000, X, Y) && !ellipse(17813.591919, 14054.801895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31756.838000, 19005.774000, 965.296028, 965.296028, 0.000000, X, Y) && !ellipse(30993.200000, 18466.250000, 1674.504048, 1674.504048, 0.000000, X, Y) && !ellipse(32790.097107, 17522.627258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31095.630859, 19516.623291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30529.120000, 19982.968000, 1390.112040, 1390.112040, 0.000000, X, Y) && !ellipse(26462.471985, 17092.618713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32239.560852, 18366.619919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27808.828000, 20952.852000, 2710.288078, 2710.288078, 0.000000, X, Y) && !ellipse(29979.802000, 20208.488000, 3017.072087, 1861.904054, 43.896000, X, Y) && !ellipse(27268.086000, 21355.452000, 1394.824040, 1394.824040, 0.000000, X, Y) && !ellipse(32150.588000, 17517.248000, 1761.568051, 1341.240039, 59.542000, X, Y) && !ellipse(28723.848000, 21271.258000, 1430.552041, 1430.552041, 0.000000, X, Y) && !ellipse(29758.588000, 20658.012000, 1430.552041, 1430.552041, 0.000000, X, Y) && !ellipse(25040.362000, 19232.506000, 1505.712043, 1505.712043, 0.000000, X, Y) && !ellipse(24252.802000, 20352.974000, 987.480028, 987.480028, 0.000000, X, Y) && !ellipse(28454.875000, 19715.787659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30129.506200, 20539.643400, 699.236820, 699.236820, 0.000000, X, Y) && !ellipse(26160.860657, 18109.071457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26540.472000, 21660.708000, 1304.248038, 1304.248038, 0.000000, X, Y) && !ellipse(13001.720000, 26430.104800, 1869.800054, 1869.800054, 0.000000, X, Y) && !ellipse(25123.600000, 18981.659000, 1401.592040, 1401.592040, 0.000000, X, Y) && !ellipse(34078.820000, 15826.586000, 1410.144041, 1410.144041, 0.000000, X, Y) && !ellipse(13131.170000, 25014.386000, 1722.600050, 1722.600050, 0.000000, X, Y) && !ellipse(17584.522629, 27164.198883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25527.014893, 22824.500397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17844.363708, 26321.837738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23739.072000, 20473.414000, 2794.336080, 2794.336080, 0.000000, X, Y) && !ellipse(24828.756000, 19508.552000, 2861.104082, 1339.640039, 48.550000, X, Y) && !ellipse(33273.023041, 17429.749023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12382.550278, 26584.863525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21710.618320, 24595.548000, 1321.480038, 1321.480038, 0.000000, X, Y) && !ellipse(33106.555359, 16156.476624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24567.888214, 22747.451447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26445.805000, 27981.657200, 735.776021, 735.776021, 0.000000, X, Y) && !ellipse(25649.154205, 18763.398117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33787.618000, 16375.336000, 4028.192116, 4028.192116, 0.000000, X, Y) && !ellipse(22178.458755, 24254.148712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25668.923553, 21965.401947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22806.154144, 23462.883606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20453.729156, 25411.173309, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11870.202637, 26048.369720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17584.334400, 28130.700000, 1588.728046, 1588.728046, 0.000000, X, Y) && !ellipse(18274.064000, 27174.428000, 1516.792044, 1516.792044, 0.000000, X, Y) && !ellipse(36640.808000, 14179.286000, 2009.224058, 2009.224058, 0.000000, X, Y) && !ellipse(33909.698600, 17547.643200, 991.600029, 991.600029, 0.000000, X, Y) && !ellipse(36751.282000, 13965.946000, 2051.992059, 2051.992059, 0.000000, X, Y) && !ellipse(37355.884000, 13475.352000, 2105.984061, 2105.984061, 0.000000, X, Y) && !ellipse(35712.728000, 15276.156000, 2054.872059, 2054.872059, 0.000000, X, Y) && !ellipse(21509.014359, 23913.423492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34099.092926, 16846.851944, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24993.398000, 29037.469800, 1246.168036, 1246.168036, 0.000000, X, Y) && !ellipse(35000.802000, 15849.928000, 3979.536115, 3070.648088, 50.322000, X, Y) && !ellipse(11284.057129, 26535.785309, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36249.536560, 26254.527435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36398.611145, 14641.824890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35318.178000, 15260.346000, 4043.336116, 4043.336116, 0.000000, X, Y) && !ellipse(34369.006000, 15972.272000, 1944.912056, 1944.912056, 0.000000, X, Y) && !ellipse(36110.678000, 14781.450000, 1989.768057, 1989.768057, 0.000000, X, Y)
[Sat May  5 12:16:42 2012] Writing fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src34.gif
[Sat May  5 14:19:46 2012] Mean detx,y = (2237.14, 4186.70) 
[Sat May  5 14:19:59 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May  5 14:44:25 2012] Binned source spectrum to 10 counts/bin
[Sat May  5 14:44:26 2012] Setting source spectrum file to fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Sat May  5 14:44:26 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Sat May  5 23:27:22 2012] Updating aperture counts using extracted products
[Sat May  5 23:27:22 2012] Error reading totcts from fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Sat May  5 23:27:28 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 23:27:28 2012] Using photon index=1.80, rate=0.0382, arf fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src34.arf
[Sat May  5 23:27:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 23:27:28 2012] Updating source flux to 3.9e-13
[Sat May  5 23:37:48 2012] Flag c found in src. 34 procflags, skipping spectral fitting