[Tue May  1 11:53:31 2012] Detection parameters:
  Position = (314.6, 248.9) = 8 49 17.15 -45 35 26.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 288.9 +/- 33.5
  Background counts = 338.5
  Rate = 0.006 +/- 0.0007

[Tue May  1 11:53:36 2012] Off-axis axis estimate = 3.78'
[Wed May  2 08:13:22 2012] Using EEF radius (= 8.32 ")to estimate initial spatial extent for simple fitting
[Wed May  2 08:13:22 2012] Initial guess for spatial extent in simple fitting = 8.32"
[Wed May  2 08:13:22 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.074
[Wed May  2 08:13:22 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 8.32"
[Wed May  2 17:36:31 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src18.ximg exists
[Wed May  2 17:36:31 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src18_1.ximg exists
[Wed May  2 17:36:31 2012] Fit fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src18 appears to have run properly
[Wed May  2 17:36:33 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Wed May  2 17:36:33 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Wed May  2 17:36:33 2012] Fit fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Wed May  2 17:38:15 2012] Spatial fit model total counts = 5067.280000, observed total counts = 4997.000000
[Wed May  2 17:38:15 2012] Offset between fit and detection position for source 33 = 3.245014 pixels
[Wed May  2 17:38:15 2012] Warning, changing simple spatial fit ID from 18 to 1
[Wed May  2 17:38:15 2012] 4956.452000 total counts/ 4641.760000 bgd. counts: snr = 4.618962
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 3.245014 pixels
  Position = (314.0, 245.7) = 8 49 17.42 -45 35 39.3
  Extent = 17.3 (16.9-17.4)", rotation angle = 0
  Source counts = 314.7 +/- 70.4
  Background counts = 4641.8
  Rate = 0.005 +/- 0.001
[Wed May  2 17:38:16 2012] Spatial fit model total counts = 5042.560000, observed total counts = 4928.000000
[Wed May  2 17:38:16 2012] Offset between fit and detection position for source 33 = 0.600742 pixels
[Wed May  2 17:38:16 2012] Warning, changing simple spatial fit ID from 1 to 16
[Wed May  2 17:38:16 2012] 4970.976000 total counts/ 4537.700000 bgd. counts: snr = 6.432010
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.600742 pixels
  Position = (314.5, 245.4) = 8 49 17.20 -45 35 40.5
  Extent = 16.9 (16.4-17.2)", rotation angle = 0
  Source counts = 433.3 +/- 70.5
  Background counts = 4537.7
  Rate = 0.007 +/- 0.001
[Wed May  2 17:38:16 2012] Vigneting correction estimate = 1.000000
[Wed May  2 17:38:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 17:38:16 2012] Assessing source extent using major axis lower bound
[Wed May  2 17:38:16 2012] Source does appear to be extended
[Wed May  2 17:38:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 17:38:16 2012] Source is confused with source 5
[Thu May  3 22:42:53 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  3 22:42:53 2012] Initial guess for spatial extent in simple fitting = 16.94"
[Thu May  3 22:42:53 2012] source mask rpix=3.9, npix_max = 77, mask sum = 81, frac = 1.049
[Thu May  3 22:42:53 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 16.94"
[Fri May  4 10:39:59 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src16.ximg exists
[Fri May  4 10:39:59 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src16.csv
[Fri May  4 10:39:59 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src16_1.ximg exists
[Fri May  4 10:39:59 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src16.csv
[Fri May  4 10:39:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 10:40:01 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Fri May  4 10:40:01 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Fri May  4 10:40:01 2012] Fit fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Fri May  4 10:41:39 2012] Spatial fit model total counts = 5044.900000, observed total counts = 4997.000000
[Fri May  4 10:41:39 2012] Offset between fit and detection position for source 33 = 0.800396 pixels
[Fri May  4 10:41:39 2012] Warning, changing simple spatial fit ID from 16 to 1
[Fri May  4 10:41:39 2012] 4837.283000 total counts/ 4474.250000 bgd. counts: snr = 5.427327
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.800396 pixels
  Position = (314.0, 246.0) = 8 49 17.42 -45 35 37.9
  Extent = 17.4 (16.6-34.9)", rotation angle = 0
  Source counts = 363.0 +/- 69.6
  Background counts = 4474.2
  Rate = 0.006 +/- 0.001
[Fri May  4 10:41:40 2012] Vigneting correction estimate = 1.000000
[Fri May  4 10:41:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 10:41:40 2012] Assessing source extent using major axis lower bound
[Fri May  4 10:41:40 2012] Source does appear to be extended
[Fri May  4 10:41:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  5 12:16:40 2012] XMMSAS src. selection expression = ellipse(27268.086000, 21355.452000, 1046.118030, 1046.118030, 0.000000, X, Y)
[Sat May  5 12:16:40 2012] Writing source region out to fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src33_src.reg
[Sat May  5 12:16:40 2012] Extracting stamp from image fullrun_mos2_xmm0412990501_pi300-10000_cl_sm2.00.img.gz, (254, 186) - (374, 306)
[Sat May  5 12:16:40 2012] XMMSAS bgd. selection expression = annulus(27268.086000, 21355.452000, 1743.530050, 3487.060100, X, Y) && !ellipse(27286.832000, 21241.414000, 2608.496075, 2005.456058, 47.432000, X, Y) && !ellipse(28434.812000, 21202.876000, 1423.464041, 1423.464041, 0.000000, X, Y) && !ellipse(32697.678000, 17031.276000, 2439.352070, 2439.352070, 0.000000, X, Y) && !ellipse(30993.200000, 18466.250000, 1674.504048, 1674.504048, 0.000000, X, Y) && !ellipse(31095.630859, 19516.623291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30529.120000, 19982.968000, 1390.112040, 1390.112040, 0.000000, X, Y) && !ellipse(26462.471985, 17092.618713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27808.828000, 20952.852000, 2710.288078, 2710.288078, 0.000000, X, Y) && !ellipse(29979.802000, 20208.488000, 3017.072087, 1861.904054, 43.896000, X, Y) && !ellipse(32150.588000, 17517.248000, 1761.568051, 1341.240039, 59.542000, X, Y) && !ellipse(28723.848000, 21271.258000, 1430.552041, 1430.552041, 0.000000, X, Y) && !ellipse(29758.588000, 20658.012000, 1430.552041, 1430.552041, 0.000000, X, Y) && !ellipse(25040.362000, 19232.506000, 1505.712043, 1505.712043, 0.000000, X, Y) && !ellipse(24252.802000, 20352.974000, 987.480028, 987.480028, 0.000000, X, Y) && !ellipse(28454.875000, 19715.787659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30129.506200, 20539.643400, 699.236820, 699.236820, 0.000000, X, Y) && !ellipse(26160.860657, 18109.071457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26540.472000, 21660.708000, 1304.248038, 1304.248038, 0.000000, X, Y) && !ellipse(25123.600000, 18981.659000, 1401.592040, 1401.592040, 0.000000, X, Y) && !ellipse(28847.442000, 20702.978000, 2780.928080, 2780.928080, 0.000000, X, Y) && !ellipse(25527.014893, 22824.500397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23739.072000, 20473.414000, 2794.336080, 2794.336080, 0.000000, X, Y) && !ellipse(24828.756000, 19508.552000, 2861.104082, 1339.640039, 48.550000, X, Y) && !ellipse(24567.888214, 22747.451447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25649.154205, 18763.398117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33787.618000, 16375.336000, 4028.192116, 4028.192116, 0.000000, X, Y) && !ellipse(25668.923553, 21965.401947, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May  5 12:16:40 2012] Writing fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src33.gif
[Sat May  5 14:00:29 2012] Mean detx,y = (1194.40, 3155.19) 
[Sat May  5 14:00:32 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May  5 14:01:13 2012] Binned source spectrum to 10 counts/bin
[Sat May  5 14:01:14 2012] Setting source spectrum file to fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Sat May  5 14:01:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Sat May  5 23:27:21 2012] Updating aperture counts using extracted products
[Sat May  5 23:27:21 2012] Error reading totcts from fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Sat May  5 23:27:27 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 23:27:27 2012] Using photon index=1.80, rate=0.0062, arf fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src33.arf
[Sat May  5 23:27:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 23:27:27 2012] Updating source flux to 6.8e-14
[Sat May  5 23:37:48 2012] Flag c found in src. 33 procflags, skipping spectral fitting