[Tue May  1 11:53:31 2012] Detection parameters:
  Position = (282.9, 262.0) = 8 49 30.28 -45 34 27.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 168.2 +/- 30.4
  Background counts = 373.9
  Rate = 0.003 +/- 0.0006

[Tue May  1 11:53:36 2012] Off-axis axis estimate = 2.87'
[Wed May  2 08:13:25 2012] Using EEF radius (= 7.86 ")to estimate initial spatial extent for simple fitting
[Wed May  2 08:13:25 2012] Initial guess for spatial extent in simple fitting = 7.86"
[Wed May  2 08:13:25 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.751
[Wed May  2 08:13:25 2012] Giving source the simple spatial ID 50 for pass 0, mean size = 7.86"
[Wed May  2 17:36:32 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src50.ximg exists
[Wed May  2 17:36:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src50.csv
[Wed May  2 17:36:32 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src50_1.ximg exists
[Wed May  2 17:36:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src50.csv
[Wed May  2 17:36:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 17:36:35 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Wed May  2 17:36:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src50.csv
[Wed May  2 17:36:35 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Wed May  2 17:36:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src50.csv
[Wed May  2 17:36:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 17:38:16 2012] Source 30 is offset by -3.948067 and -9.001409 pixels which is larger than
2 X fitted extent = 0.888115 x 0.888115, not incorporating fit results
[Wed May  2 17:38:16 2012] Spatial fit model total counts = 4516.090000, observed total counts = 3988.000000
[Wed May  2 17:38:16 2012] Poor agreement between spatial fit and data for source 30
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May  2 17:38:16 2012] Vigneting correction estimate = 1.000000
[Wed May  2 17:38:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 17:38:16 2012] Assessing source extent using major
[Wed May  2 17:38:16 2012] Source does appear to be extended
[Wed May  2 17:38:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 22:42:53 2012] Using EEF radius (= 7.86 ")to estimate initial spatial extent for simple fitting
[Thu May  3 22:42:53 2012] Initial guess for spatial extent in simple fitting = 7.86"
[Thu May  3 22:42:53 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.751
[Thu May  3 22:42:53 2012] Giving source the simple spatial ID 44 for pass 1, mean size = 7.86"
[Fri May  4 10:40:00 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src44.ximg exists
[Fri May  4 10:40:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src44.csv
[Fri May  4 10:40:00 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src44_1.ximg exists
[Fri May  4 10:40:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src44.csv
[Fri May  4 10:40:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 10:40:02 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Fri May  4 10:40:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src44.csv
[Fri May  4 10:40:02 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Fri May  4 10:40:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src44.csv
[Fri May  4 10:40:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 10:41:40 2012] Spatial fit model total counts = 4514.630000, observed total counts = 3988.000000
[Fri May  4 10:41:40 2012] Poor agreement between spatial fit and data for source 30
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May  4 10:41:40 2012] Vigneting correction estimate = 1.000000
[Fri May  4 10:41:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 10:41:40 2012] Assessing source extent using major
[Fri May  4 10:41:40 2012] Source does appear to be extended
[Fri May  4 10:41:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  5 12:16:42 2012] XMMSAS src. selection expression = ellipse(24567.888214, 22747.451447, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May  5 12:16:42 2012] Writing source region out to fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src30_src.reg
[Sat May  5 12:16:42 2012] Extracting stamp from image fullrun_mos2_xmm0412990501_pi300-10000_cl_sm2.00.img.gz, (245, 225) - (320, 300)
[Sat May  5 12:16:42 2012] XMMSAS bgd. selection expression = annulus(24567.888214, 22747.451447, 1087.500000, 2175.000000, X, Y) && !ellipse(27286.832000, 21241.414000, 2608.496075, 2005.456058, 47.432000, X, Y) && !ellipse(27808.828000, 20952.852000, 2710.288078, 2710.288078, 0.000000, X, Y) && !ellipse(27268.086000, 21355.452000, 1394.824040, 1394.824040, 0.000000, X, Y) && !ellipse(25040.362000, 19232.506000, 1505.712043, 1505.712043, 0.000000, X, Y) && !ellipse(24252.802000, 20352.974000, 987.480028, 987.480028, 0.000000, X, Y) && !ellipse(26540.472000, 21660.708000, 1304.248038, 1304.248038, 0.000000, X, Y) && !ellipse(28847.442000, 20702.978000, 2780.928080, 2780.928080, 0.000000, X, Y) && !ellipse(25527.014893, 22824.500397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23739.072000, 20473.414000, 2794.336080, 2794.336080, 0.000000, X, Y) && !ellipse(24828.756000, 19508.552000, 2861.104082, 1339.640039, 48.550000, X, Y) && !ellipse(21710.618320, 24595.548000, 1321.480038, 1321.480038, 0.000000, X, Y) && !ellipse(22178.458755, 24254.148712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25668.923553, 21965.401947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22806.154144, 23462.883606, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May  5 12:16:42 2012] Writing fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src30.gif
[Sat May  5 15:42:34 2012] Mean detx,y = (-1049.36, 1052.52) 
[Sat May  5 15:42:39 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May  5 15:43:09 2012] Binned source spectrum to 10 counts/bin
[Sat May  5 15:43:09 2012] Setting source spectrum file to fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Sat May  5 15:43:09 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Sat May  5 21:03:50 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May  5 21:03:50 2012] rmf not generated due to insufficient counts
[Sat May  5 23:27:23 2012] Updating aperture counts using extracted products
[Sat May  5 23:27:23 2012] Error reading totcts from fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Sat May  5 23:27:29 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 23:27:29 2012] Using photon index=1.80, rate=0.00313, arf fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src30.arf
[Sat May  5 23:27:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 23:27:29 2012] Updating source flux to 3e-14
[Sat May  5 23:37:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting