[Tue May  1 11:53:30 2012] Detection parameters:
  Position = (142.9, 306.1) = 8 50 28.24 -45 31 15.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 185.5 +/- 25.8
  Background counts = 163.5
  Rate = 0.003 +/- 0.0004

[Tue May  1 11:53:36 2012] Off-axis axis estimate = 11.29'
[Wed May  2 08:13:25 2012] Using EEF radius (= 12.07 ")to estimate initial spatial extent for simple fitting
[Wed May  2 08:13:25 2012] Initial guess for spatial extent in simple fitting = 12.07"
[Wed May  2 08:13:25 2012] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.839
[Wed May  2 08:13:25 2012] Giving source the simple spatial ID 46 for pass 0, mean size = 12.07"
[Wed May  2 17:36:32 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src46.ximg exists
[Wed May  2 17:36:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src46.csv
[Wed May  2 17:36:32 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src46_1.ximg exists
[Wed May  2 17:36:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src46.csv
[Wed May  2 17:36:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 17:36:35 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src46.ximg exists
[Wed May  2 17:36:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src46.csv
[Wed May  2 17:36:35 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src46_1.ximg exists
[Wed May  2 17:36:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src46.csv
[Wed May  2 17:36:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 17:38:16 2012] Warning, spatial fit 46 centroid is now closest to src. 24
[Wed May  2 17:38:16 2012] Vigneting correction estimate = 1.000000
[Wed May  2 17:38:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 17:38:16 2012] Assessing source extent using major
[Wed May  2 17:38:16 2012] Source does appear to be extended
[Wed May  2 17:38:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 22:42:53 2012] Using EEF radius (= 12.07 ")to estimate initial spatial extent for simple fitting
[Thu May  3 22:42:53 2012] Initial guess for spatial extent in simple fitting = 12.07"
[Thu May  3 22:42:53 2012] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.839
[Thu May  3 22:42:53 2012] Giving source the simple spatial ID 40 for pass 1, mean size = 12.07"
[Fri May  4 10:40:00 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src40.ximg exists
[Fri May  4 10:40:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src40.csv
[Fri May  4 10:40:00 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src40_1.ximg exists
[Fri May  4 10:40:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src40.csv
[Fri May  4 10:40:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 10:40:02 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Fri May  4 10:40:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src40.csv
[Fri May  4 10:40:02 2012] fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Fri May  4 10:40:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src40.csv
[Fri May  4 10:40:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 10:41:40 2012] Warning, spatial fit 40 centroid is now closest to src. 23
[Fri May  4 10:41:40 2012] Vigneting correction estimate = 1.000000
[Fri May  4 10:41:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 10:41:40 2012] Assessing source extent using major
[Fri May  4 10:41:40 2012] Source does appear to be extended
[Fri May  4 10:41:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 10:41:40 2012] Source is confused with source 21
[Sat May  5 12:16:42 2012] XMMSAS src. selection expression = ellipse(12382.550278, 26584.863525, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May  5 12:16:42 2012] Writing source region out to fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src18_src.reg
[Sat May  5 12:16:42 2012] Extracting stamp from image fullrun_mos2_xmm0412990501_pi300-10000_cl_sm2.00.img.gz, (105, 269) - (180, 344)
[Sat May  5 12:16:42 2012] XMMSAS bgd. selection expression = annulus(12382.550278, 26584.863525, 1087.500000, 2175.000000, X, Y) && !ellipse(13001.720000, 26430.104800, 1869.800054, 1869.800054, 0.000000, X, Y) && !ellipse(13131.170000, 25014.386000, 1722.600050, 1722.600050, 0.000000, X, Y) && !ellipse(11870.202637, 26048.369720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11284.057129, 26535.785309, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May  5 12:16:42 2012] Writing fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src18.gif
[Sat May  5 15:39:02 2012] Mean detx,y = (-11623.65, -6031.93) 
[Sat May  5 15:39:04 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May  5 15:39:34 2012] Binned source spectrum to 10 counts/bin
[Sat May  5 15:39:35 2012] Setting source spectrum file to fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sat May  5 15:39:35 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Sat May  5 20:46:20 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May  5 20:46:20 2012] rmf not generated due to insufficient counts
[Sat May  5 23:27:23 2012] Updating aperture counts using extracted products
[Sat May  5 23:27:23 2012] Error reading totcts from fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sat May  5 23:27:29 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 23:27:29 2012] Using photon index=1.80, rate=0.00317, arf fullrun_mos2_xmm0412990501_pi300-10000_pass1_cl_src18.arf
[Sat May  5 23:27:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 23:27:29 2012] Updating source flux to 6.1e-14
[Sat May  5 23:37:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting