[Tue May  1 11:53:27 2012] Detection parameters:
  Position = (206.4, 316.0) = 8 50 1.92 -45 30 24.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 170.1 +/- 21.2
  Background counts = 195.5
  Rate = 0.005 +/- 0.0006

[Tue May  1 11:53:27 2012] Off-axis axis estimate = 6.79'
[Wed May  2 01:37:14 2012] Using EEF radius (= 9.82 ")to estimate initial spatial extent for simple fitting
[Wed May  2 01:37:14 2012] Initial guess for spatial extent in simple fitting = 9.82"
[Wed May  2 01:37:14 2012] source mask rpix=2.3, npix_max = 30, mask sum = 26, frac = 0.854
[Wed May  2 01:37:14 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 9.82"
[Wed May  2 08:13:14 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_src30.ximg exists
[Wed May  2 08:13:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_src30.csv
[Wed May  2 08:13:14 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_src30_1.ximg exists
[Wed May  2 08:13:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_src30.csv
[Wed May  2 08:13:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 08:13:18 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Wed May  2 08:13:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src30.csv
[Wed May  2 08:13:18 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Wed May  2 08:13:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src30.csv
[Wed May  2 08:13:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 17:37:46 2012] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 76 at 10.580506 pixels away
[Wed May  2 17:37:46 2012] Spatial fit model total counts = 2791.560000, observed total counts = 2774.000000
[Wed May  2 17:37:46 2012] Offset between fit and detection position for source 76 = 1.244005 pixels
[Wed May  2 17:37:46 2012] Warning, changing simple spatial fit ID from 30 to 48
[Wed May  2 17:37:46 2012] 2789.299000 total counts/ 2560.460000 bgd. counts: snr = 4.522422
Spatial fit parameters:
  Offset between fit and detection position for source 76 = 1.244005 pixels
  Position = (205.3, 315.6) = 8 50 2.42 -45 30 34.8
  Extent = 19.1 (19.1-38.2)", rotation angle = 0
  Source counts = 228.8 +/- 52.8
  Background counts = 2560.5
  Rate = 0.004 +/- 0.0009
[Wed May  2 17:37:46 2012] Vigneting correction estimate = 1.000000
[Wed May  2 17:37:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 17:37:46 2012] Assessing source extent using major axis lower bound
[Wed May  2 17:37:46 2012] Source does appear to be extended
[Wed May  2 17:37:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 17:37:46 2012] Source is confused with source 49
[Thu May  3 13:40:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  3 13:40:56 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May  3 13:40:56 2012] Initial guess for spatial extent in simple fitting = 19.10"
[Thu May  3 13:40:56 2012] source mask rpix=4.4, npix_max = 95, mask sum = 63, frac = 0.658
[Thu May  3 13:40:56 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 19.10"
[Thu May  3 22:42:50 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_src26.ximg exists
[Thu May  3 22:42:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_src26.csv
[Thu May  3 22:42:50 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_src26_1.ximg exists
[Thu May  3 22:42:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_src26.csv
[Thu May  3 22:42:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 22:42:52 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Thu May  3 22:42:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src26.csv
[Thu May  3 22:42:52 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Thu May  3 22:42:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src26.csv
[Thu May  3 22:42:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 10:41:11 2012] Warning, spatial fit 26 centroid is now closest to src. 31
[Fri May  4 10:41:11 2012] Vigneting correction estimate = 1.000000
[Fri May  4 10:41:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 10:41:11 2012] Assessing source extent using major axis lower bound
[Fri May  4 10:41:11 2012] Source does appear to be extended
[Fri May  4 10:41:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  5 04:11:09 2012] XMMSAS src. selection expression = ellipse(17808.942000, 27409.392000, 1146.258033, 1146.258033, 0.000000, X, Y)
[Sat May  5 04:11:09 2012] Writing source region out to fullrun_mos1_xmm0412990501_pi300-10000_pass1_cl_src76_src.reg
[Sat May  5 04:11:09 2012] Extracting stamp from image fullrun_mos1_xmm0412990501_pi300-10000_cl_sm2.00.img.gz, (139, 250) - (271, 381)
[Sat May  5 04:11:09 2012] XMMSAS bgd. selection expression = annulus(17808.942000, 27409.392000, 1910.430055, 3820.860110, X, Y) && !ellipse(22617.273600, 24337.514000, 1163.496033, 1163.496033, 0.000000, X, Y) && !ellipse(19093.454600, 26055.344000, 295.541609, 295.541609, 0.000000, X, Y) && !ellipse(21579.162888, 24793.281616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20964.214000, 24911.755200, 1065.904031, 1065.904031, 0.000000, X, Y) && !ellipse(18475.215927, 26832.346771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20440.988000, 25134.278600, 2081.584060, 2081.584060, 0.000000, X, Y) && !ellipse(21932.741400, 23350.854000, 1115.920032, 1115.920032, 0.000000, X, Y) && !ellipse(18875.532000, 26393.274000, 1528.344044, 1528.344044, 0.000000, X, Y)
[Sat May  5 04:11:09 2012] Writing fullrun_mos1_xmm0412990501_pi300-10000_pass1_cl_src76.gif
[Sat May  5 05:38:46 2012] Mean detx,y = (-5072.53, 5933.33) 
[Sat May  5 05:38:49 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May  5 05:39:47 2012] Binned source spectrum to 10 counts/bin
[Sat May  5 05:39:48 2012] Setting source spectrum file to fullrun_mos1_xmm0412990501_pi300-10000_pass1_cl_src76_src_b10.pi.gz
[Sat May  5 05:39:48 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412990501_pi300-10000_pass1_cl_src76_bgd.pi.gz
[Sat May  5 23:27:13 2012] Updating aperture counts using extracted products
[Sat May  5 23:27:13 2012] Error reading totcts from fullrun_mos1_xmm0412990501_pi300-10000_pass1_cl_src76_src_b10.pi.gz
[Sat May  5 23:27:17 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 23:27:17 2012] Using photon index=1.80, rate=0.00391, arf fullrun_mos1_xmm0412990501_pi300-10000_pass1_cl_src76.arf
[Sat May  5 23:27:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 23:27:17 2012] Updating source flux to 4.6e-14
[Sat May  5 23:27:35 2012] Flag c found in src. 76 procflags, skipping spectral fitting