[Tue May  1 11:53:16 2012] Detection parameters:
  Position = (123.8, 288.8) = 8 50 36.15 -45 32 31.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 183.3 +/- 25.5
  Background counts = 168.5
  Rate = 0.003 +/- 0.0004

[Tue May  1 11:53:27 2012] Off-axis axis estimate = 12.68'
[Wed May  2 01:37:14 2012] Using EEF radius (= 12.77 ")to estimate initial spatial extent for simple fitting
[Wed May  2 01:37:14 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  2 01:37:14 2012] Initial guess for spatial extent in simple fitting = 12.77"
[Wed May  2 01:37:14 2012] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.038
[Wed May  2 01:37:14 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 12.77"
[Wed May  2 08:13:15 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_src45.ximg exists
[Wed May  2 08:13:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_src45.csv
[Wed May  2 08:13:15 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_src45_1.ximg exists
[Wed May  2 08:13:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_src45.csv
[Wed May  2 08:13:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 08:13:19 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Wed May  2 08:13:19 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Wed May  2 08:13:19 2012] Fit fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly
[Wed May  2 17:37:46 2012] Warning: source 45 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 13.637937 pixels away
[Wed May  2 17:37:46 2012] Vigneting correction estimate = 1.000000
[Wed May  2 17:37:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 17:37:46 2012] Assessing source extent using major
[Wed May  2 17:37:46 2012] Source does appear to be extended
[Wed May  2 17:37:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 13:40:56 2012] Using EEF radius (= 12.77 ")to estimate initial spatial extent for simple fitting
[Thu May  3 13:40:56 2012] Initial guess for spatial extent in simple fitting = 12.77"
[Thu May  3 13:40:56 2012] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.038
[Thu May  3 13:40:56 2012] Giving source the simple spatial ID 40 for pass 1, mean size = 12.77"
[Thu May  3 22:42:50 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_src40.ximg exists
[Thu May  3 22:42:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_src40.csv
[Thu May  3 22:42:50 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_src40_1.ximg exists
[Thu May  3 22:42:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_src40.csv
[Thu May  3 22:42:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 22:42:52 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Thu May  3 22:42:52 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Thu May  3 22:42:52 2012] Fit fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src40 appears to have run properly
[Fri May  4 10:41:11 2012] Spatial fit model total counts = 3344.110000, observed total counts = 3349.000000
[Fri May  4 10:41:11 2012] Offset between fit and detection position for source 7 = 0.131309 pixels
[Fri May  4 10:41:11 2012] 3363.028000 total counts/ 3214.910000 bgd. counts: snr = 2.612302
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.131309 pixels
  Position = (123.8, 288.7) = 8 50 36.18 -45 32 30.9
  Extent = 7.5 (5.5-10.3)", rotation angle = 0
  Source counts = 148.1 +/- 58.0
  Background counts = 3214.9
  Rate = 0.003 +/- 0.001
[Fri May  4 10:41:11 2012] Vigneting correction estimate = 1.000000
[Fri May  4 10:41:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 10:41:11 2012] Assessing source extent using major axis lower bound
[Fri May  4 10:41:11 2012] Source does appear to be extended
[Fri May  4 10:41:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  5 04:11:10 2012] XMMSAS src. selection expression = ellipse(10720.715800, 25067.234000, 449.473813, 449.473813, 0.000000, X, Y)
[Sat May  5 04:11:10 2012] Writing source region out to fullrun_mos1_xmm0412990501_pi300-10000_pass1_cl_src7_src.reg
[Sat May  5 04:11:10 2012] Extracting stamp from image fullrun_mos1_xmm0412990501_pi300-10000_cl_sm2.00.img.gz, (98, 263) - (150, 315)
[Sat May  5 04:11:10 2012] XMMSAS bgd. selection expression = annulus(10720.715800, 25067.234000, 749.123022, 1498.246043, X, Y) && !ellipse(12601.347400, 26724.916000, 823.536024, 823.536024, 0.000000, X, Y) && !ellipse(12120.551987, 26996.653259, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May  5 04:11:10 2012] Writing fullrun_mos1_xmm0412990501_pi300-10000_pass1_cl_src7.gif
[Sat May  5 06:05:42 2012] Mean detx,y = (-4936.92, 13441.02) 
[Sat May  5 06:05:45 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May  5 06:06:00 2012] Binned source spectrum to 10 counts/bin
[Sat May  5 06:06:01 2012] Setting source spectrum file to fullrun_mos1_xmm0412990501_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat May  5 06:06:01 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412990501_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sat May  5 23:27:14 2012] Updating aperture counts using extracted products
[Sat May  5 23:27:14 2012] Error reading totcts from fullrun_mos1_xmm0412990501_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat May  5 23:27:19 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 23:27:19 2012] Using photon index=1.80, rate=0.00253, arf fullrun_mos1_xmm0412990501_pi300-10000_pass1_cl_src7.arf
[Sat May  5 23:27:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 23:27:19 2012] Updating source flux to 5.4e-14