[Tue May  1 11:53:21 2012] Detection parameters:
  Position = (290.8, 92.3) = 8 49 27.02 -45 46 48.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 107.0 +/- 20.8
  Background counts = 116.3
  Rate = 0.002 +/- 0.0004

[Tue May  1 11:53:27 2012] Off-axis axis estimate = 14.96'
[Wed May  2 01:37:14 2012] Using EEF radius (= 13.91 ")to estimate initial spatial extent for simple fitting
[Wed May  2 01:37:14 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  2 01:37:14 2012] Initial guess for spatial extent in simple fitting = 13.91"
[Wed May  2 01:37:14 2012] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.024
[Wed May  2 01:37:14 2012] Giving source the simple spatial ID 70 for pass 0, mean size = 13.91"
[Wed May  2 08:13:16 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_src70.ximg exists
[Wed May  2 08:13:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_src70.csv
[Wed May  2 08:13:16 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_src70_1.ximg exists
[Wed May  2 08:13:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_src70.csv
[Wed May  2 08:13:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 08:13:20 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src70.ximg exists
[Wed May  2 08:13:20 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src70_1.ximg exists
[Wed May  2 08:13:20 2012] Fit fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src70 appears to have run properly
[Wed May  2 17:37:46 2012] Warning: source 70 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 35 at 15.926655 pixels away
[Wed May  2 17:37:46 2012] Vigneting correction estimate = 1.000000
[Wed May  2 17:37:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 17:37:46 2012] Assessing source extent using major
[Wed May  2 17:37:46 2012] Source does appear to be extended
[Wed May  2 17:37:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 17:37:46 2012] Source is confused with source 34
[Thu May  3 13:40:56 2012] Using EEF radius (= 13.91 ")to estimate initial spatial extent for simple fitting
[Thu May  3 13:40:56 2012] Initial guess for spatial extent in simple fitting = 13.91"
[Thu May  3 13:40:56 2012] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.024
[Thu May  3 13:40:56 2012] Giving source the simple spatial ID 60 for pass 1, mean size = 13.91"
[Thu May  3 22:42:51 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_src60.ximg exists
[Thu May  3 22:42:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_src60.csv
[Thu May  3 22:42:51 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_src60_1.ximg exists
[Thu May  3 22:42:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_src60.csv
[Thu May  3 22:42:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_src60_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 22:42:53 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src60.ximg exists
[Thu May  3 22:42:53 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src60_1.ximg exists
[Thu May  3 22:42:53 2012] Fit fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src60 appears to have run properly
[Fri May  4 10:41:11 2012] Spatial fit model total counts = 3661.480000, observed total counts = 3557.000000
[Fri May  4 10:41:11 2012] Offset between fit and detection position for source 35 = 4.897976 pixels
[Fri May  4 10:41:11 2012] 3713.369000 total counts/ 2867.370000 bgd. counts: snr = 15.798941
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 4.897976 pixels
  Position = (286.8, 89.5) = 8 49 28.69 -45 46 59.0
  Extent = 27.8 (27.8-55.6)", rotation angle = 0
  Source counts = 846.0 +/- 60.9
  Background counts = 2867.4
  Rate = 0.01 +/- 0.001
[Fri May  4 10:41:11 2012] Vigneting correction estimate = 1.000000
[Fri May  4 10:41:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 10:41:11 2012] Assessing source extent using major axis lower bound
[Fri May  4 10:41:11 2012] Source does appear to be extended
[Fri May  4 10:41:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  5 04:11:11 2012] XMMSAS src. selection expression = ellipse(24905.940000, 7734.182000, 1668.780048, 1668.780048, 0.000000, X, Y)
[Sat May  5 04:11:11 2012] Writing source region out to fullrun_mos1_xmm0412990501_pi300-10000_pass1_cl_src35_src.reg
[Sat May  5 04:11:11 2012] Extracting stamp from image fullrun_mos1_xmm0412990501_pi300-10000_cl_sm2.00.img.gz, (191, 0) - (383, 185)
[Sat May  5 04:11:11 2012] XMMSAS bgd. selection expression = annulus(24905.940000, 7734.182000, 2781.300080, 5562.600160, X, Y) && !ellipse(30746.425476, 8967.520172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24268.880000, 7490.128000, 2249.152065, 2249.152065, 0.000000, X, Y)
[Sat May  5 04:11:11 2012] Writing fullrun_mos1_xmm0412990501_pi300-10000_pass1_cl_src35.gif
[Sat May  5 06:38:22 2012] Mean detx,y = (15333.04, 4626.79) 
[Sat May  5 06:38:24 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May  5 06:40:05 2012] Binned source spectrum to 10 counts/bin
[Sat May  5 06:40:06 2012] Setting source spectrum file to fullrun_mos1_xmm0412990501_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Sat May  5 06:40:06 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412990501_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Sat May  5 23:27:15 2012] Updating aperture counts using extracted products
[Sat May  5 23:27:15 2012] Error reading totcts from fullrun_mos1_xmm0412990501_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Sat May  5 23:27:20 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 23:27:20 2012] Using photon index=1.80, rate=0.0144, arf fullrun_mos1_xmm0412990501_pi300-10000_pass1_cl_src35.arf
[Sat May  5 23:27:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 23:27:20 2012] Updating source flux to 3.2e-13
[Sat May  5 23:27:35 2012] Flag c found in src. 35 procflags, skipping spectral fitting