[Tue May  1 11:53:18 2012] Detection parameters:
  Position = (354.0, 214.5) = 8 49 0.82 -45 37 47.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 291.6 +/- 28.0
  Background counts = 326.0
  Rate = 0.009 +/- 0.0009

[Tue May  1 11:53:27 2012] Off-axis axis estimate = 7.30'
[Wed May  2 01:37:14 2012] Using EEF radius (= 10.08 ")to estimate initial spatial extent for simple fitting
[Wed May  2 01:37:14 2012] Initial guess for spatial extent in simple fitting = 10.08"
[Wed May  2 01:37:14 2012] source mask rpix=2.3, npix_max = 31, mask sum = 29, frac = 0.914
[Wed May  2 01:37:14 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 10.08"
[Wed May  2 08:13:14 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_src9.ximg exists
[Wed May  2 08:13:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_src9.csv
[Wed May  2 08:13:14 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_src9_1.ximg exists
[Wed May  2 08:13:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_src9.csv
[Wed May  2 08:13:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 08:13:17 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Wed May  2 08:13:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src9.csv
[Wed May  2 08:13:17 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Wed May  2 08:13:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src9.csv
[Wed May  2 08:13:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 17:37:46 2012] Warning, spatial fit 9 centroid is now closest to src. 15
[Wed May  2 17:37:46 2012] Source 18 is offset by -5.031090 and 4.749292 pixels which is larger than
2 X fitted extent = 1.298377 x 1.298377, not incorporating fit results
[Wed May  2 17:37:46 2012] Vigneting correction estimate = 1.000000
[Wed May  2 17:37:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 17:37:46 2012] Assessing source extent using major
[Wed May  2 17:37:46 2012] Source does appear to be extended
[Wed May  2 17:37:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 17:37:46 2012] Source is confused with source 13
[Thu May  3 13:40:56 2012] Using EEF radius (= 10.08 ")to estimate initial spatial extent for simple fitting
[Thu May  3 13:40:56 2012] Initial guess for spatial extent in simple fitting = 10.08"
[Thu May  3 13:40:56 2012] source mask rpix=2.3, npix_max = 31, mask sum = 29, frac = 0.914
[Thu May  3 13:40:56 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 10.08"
[Thu May  3 22:42:49 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_src8.ximg exists
[Thu May  3 22:42:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_src8.csv
[Thu May  3 22:42:49 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_src8_1.ximg exists
[Thu May  3 22:42:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_src8.csv
[Thu May  3 22:42:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 22:42:51 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Thu May  3 22:42:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src8.csv
[Thu May  3 22:42:51 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Thu May  3 22:42:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src8.csv
[Thu May  3 22:42:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 10:41:11 2012] Source 18 is offset by 8.578496 and 1.743035 pixels which is larger than
2 X fitted extent = 1.183867 x 1.158239, not incorporating fit results
[Fri May  4 10:41:11 2012] Vigneting correction estimate = 1.000000
[Fri May  4 10:41:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 10:41:11 2012] Assessing source extent using major
[Fri May  4 10:41:11 2012] Source does appear to be extended
[Fri May  4 10:41:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  5 04:11:08 2012] XMMSAS src. selection expression = ellipse(30748.783142, 18615.036407, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May  5 04:11:08 2012] Writing source region out to fullrun_mos1_xmm0412990501_pi300-10000_pass1_cl_src18_src.reg
[Sat May  5 04:11:08 2012] Extracting stamp from image fullrun_mos1_xmm0412990501_pi300-10000_cl_sm2.00.img.gz, (316, 177) - (391, 252)
[Sat May  5 04:11:08 2012] XMMSAS bgd. selection expression = annulus(30748.783142, 18615.036407, 1087.500000, 2175.000000, X, Y) && !ellipse(32670.235809, 16664.276199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31869.522176, 18775.173202, 1612.264046, 1005.954485, 359.999493, X, Y) && !ellipse(32083.378000, 18791.446600, 1679.616048, 652.529619, 27.697000, X, Y) && !ellipse(32748.405182, 17785.662338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33238.120000, 17649.356000, 1807.872052, 1807.872052, 0.000000, X, Y) && !ellipse(28330.612000, 20357.651400, 1455.128042, 575.486417, 19.200600, X, Y) && !ellipse(28214.969400, 21366.659280, 1367.288039, 832.064024, 14.819000, X, Y) && !ellipse(32026.059326, 18131.831696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32122.386600, 17173.199600, 740.360021, 740.360021, 0.000000, X, Y) && !ellipse(30741.328000, 19801.222000, 1512.152044, 1512.152044, 0.000000, X, Y) && !ellipse(31032.056000, 19573.846000, 1547.144045, 1286.568037, 46.048200, X, Y) && !ellipse(30306.736000, 20102.018000, 2482.400071, 1548.872045, 48.384000, X, Y) && !ellipse(30077.778000, 19868.652000, 2951.872085, 2951.872085, 0.000000, X, Y) && !ellipse(29807.840000, 20368.940000, 3024.304087, 3024.304087, 0.000000, X, Y) && !ellipse(28631.213818, 20166.708085, 1367.288039, 1177.754645, 49.203107, X, Y) && !ellipse(34140.364400, 16041.186000, 1674.056048, 1674.056048, 0.000000, X, Y) && !ellipse(32922.755646, 16145.954742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33579.835571, 17089.225586, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May  5 04:11:08 2012] Writing fullrun_mos1_xmm0412990501_pi300-10000_pass1_cl_src18.gif
[Sat May  5 04:16:50 2012] Mean detx,y = (7051.79, -3948.98) 
[Sat May  5 04:16:52 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May  5 04:17:26 2012] Binned source spectrum to 10 counts/bin
[Sat May  5 04:17:26 2012] Setting source spectrum file to fullrun_mos1_xmm0412990501_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sat May  5 04:17:26 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412990501_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Sat May  5 07:23:19 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May  5 07:23:19 2012] rmf not generated due to insufficient counts
[Sat May  5 23:27:12 2012] Updating aperture counts using extracted products
[Sat May  5 23:27:12 2012] Error reading totcts from fullrun_mos1_xmm0412990501_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sat May  5 23:27:16 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 23:27:16 2012] Using photon index=1.80, rate=0.00906, arf fullrun_mos1_xmm0412990501_pi300-10000_pass1_cl_src18.arf
[Sat May  5 23:27:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 23:27:16 2012] Updating source flux to 1.4e-13
[Sat May  5 23:27:35 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting