[Tue May 1 11:53:18 2012] Detection parameters: Position = (372.5, 214.1) = 8 48 53.14 -45 37 57.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 301.9 +/- 33.1 Background counts = 292.2 Rate = 0.009 +/- 0.001 [Tue May 1 11:53:27 2012] Off-axis axis estimate = 8.14' [Wed May 2 01:37:14 2012] Using EEF radius (= 10.50 ")to estimate initial spatial extent for simple fitting [Wed May 2 01:37:14 2012] Initial guess for spatial extent in simple fitting = 10.50" [Wed May 2 01:37:14 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.884 [Wed May 2 01:37:14 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 10.50" [Wed May 2 08:13:14 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_src10.ximg exists [Wed May 2 08:13:14 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_src10_1.ximg exists [Wed May 2 08:13:14 2012] Fit fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_src10 appears to have run properly [Wed May 2 08:13:17 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src10.ximg exists [Wed May 2 08:13:17 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists [Wed May 2 08:13:17 2012] Fit fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly [Wed May 2 17:37:46 2012] Spatial fit model total counts = 4658.880000, observed total counts = 4581.000000 [Wed May 2 17:37:46 2012] Offset between fit and detection position for source 17 = 4.011674 pixels [Wed May 2 17:37:46 2012] 4440.774000 total counts/ 4058.430000 bgd. counts: snr = 6.001713 Spatial fit parameters: Offset between fit and detection position for source 17 = 4.011674 pixels Position = (369.3, 216.6) = 8 48 54.46 -45 37 45.9 Extent = 21.0 (15.7-42.0)" x 8.2 (5.6-13.2)", rotation angle = 28 (5-43) degrees Source counts = 382.3 +/- 66.6 Background counts = 4058.4 Rate = 0.007 +/- 0.001 [Wed May 2 17:37:46 2012] Vigneting correction estimate = 1.000000 [Wed May 2 17:37:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 2 17:37:46 2012] Assessing source extent using major axis lower bound [Wed May 2 17:37:46 2012] Source does appear to be extended [Wed May 2 17:37:46 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.19 [Wed May 2 17:37:46 2012] Source is confused with source 16 [Thu May 3 13:40:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Thu May 3 13:40:56 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Thu May 3 13:40:56 2012] Initial guess for spatial extent in simple fitting = 14.58" [Thu May 3 13:40:56 2012] source mask rpix=3.4, npix_max = 59, mask sum = 56, frac = 0.944 [Thu May 3 13:40:56 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 14.58" [Thu May 3 22:42:49 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_src9.ximg exists [Thu May 3 22:42:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_src9.csv [Thu May 3 22:42:49 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_src9_1.ximg exists [Thu May 3 22:42:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_src9.csv [Thu May 3 22:42:50 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_src9_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 3 22:42:51 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src9.ximg exists [Thu May 3 22:42:51 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists [Thu May 3 22:42:51 2012] Fit fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly [Fri May 4 10:41:11 2012] Warning, spatial fit 9 centroid is now closest to src. 22 [Fri May 4 10:41:11 2012] Source 17 is offset by -8.370851 and -3.151671 pixels which is larger than 2 X fitted extent = 1.212846 x 1.212846, not incorporating fit results [Fri May 4 10:41:11 2012] Vigneting correction estimate = 1.000000 [Fri May 4 10:41:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 4 10:41:11 2012] Assessing source extent using major axis lower bound [Fri May 4 10:41:11 2012] Source does appear to be extended [Fri May 4 10:41:11 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.19 [Sat May 5 04:11:08 2012] XMMSAS src. selection expression = ellipse(32083.378000, 18791.446600, 1259.712036, 489.397214, 27.697000, X, Y) [Sat May 5 04:11:08 2012] Writing source region out to fullrun_mos1_xmm0412990501_pi300-10000_pass1_cl_src17_src.reg [Sat May 5 04:11:08 2012] Extracting stamp from image fullrun_mos1_xmm0412990501_pi300-10000_cl_sm2.00.img.gz, (297, 144) - (442, 289) [Sat May 5 04:11:08 2012] XMMSAS bgd. selection expression = annulus(32083.378000, 18791.446600, 2099.520060, 4199.040121, X, Y) && !ellipse(32670.235809, 16664.276199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27637.418030, 20387.333511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31869.522176, 18775.173202, 1612.264046, 1005.954485, 359.999493, X, Y) && !ellipse(30748.783142, 18615.036407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32748.405182, 17785.662338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33238.120000, 17649.356000, 1807.872052, 1807.872052, 0.000000, X, Y) && !ellipse(28330.612000, 20357.651400, 1455.128042, 575.486417, 19.200600, X, Y) && !ellipse(28214.969400, 21366.659280, 1367.288039, 832.064024, 14.819000, X, Y) && !ellipse(32026.059326, 18131.831696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32122.386600, 17173.199600, 740.360021, 740.360021, 0.000000, X, Y) && !ellipse(30741.328000, 19801.222000, 1512.152044, 1512.152044, 0.000000, X, Y) && !ellipse(31032.056000, 19573.846000, 1547.144045, 1286.568037, 46.048200, X, Y) && !ellipse(30306.736000, 20102.018000, 2482.400071, 1548.872045, 48.384000, X, Y) && !ellipse(30077.778000, 19868.652000, 2951.872085, 2951.872085, 0.000000, X, Y) && !ellipse(29807.840000, 20368.940000, 3024.304087, 3024.304087, 0.000000, X, Y) && !ellipse(26945.044000, 21612.522000, 1355.672039, 1355.672039, 0.000000, X, Y) && !ellipse(27508.208374, 21274.672180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28631.213818, 20166.708085, 1367.288039, 1177.754645, 49.203107, X, Y) && !ellipse(34140.364400, 16041.186000, 1674.056048, 1674.056048, 0.000000, X, Y) && !ellipse(32922.755646, 16145.954742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27518.456787, 21851.856964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34248.879800, 16048.723200, 990.864029, 990.864029, 0.000000, X, Y) && !ellipse(33579.835571, 17089.225586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36260.695648, 14653.391525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34019.139374, 16564.282486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35495.633026, 15913.737915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36795.798218, 14235.889496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35900.455963, 23263.092651, 870.000000, 870.000000, 0.000000, X, Y) [Sat May 5 04:11:08 2012] Writing fullrun_mos1_xmm0412990501_pi300-10000_pass1_cl_src17.gif [Sat May 5 04:17:45 2012] Mean detx,y = (7230.85, -5095.67) [Sat May 5 04:17:48 2012] Setting backscal keywords in source and bgd. spectrum [Sat May 5 04:18:34 2012] Binned source spectrum to 10 counts/bin [Sat May 5 04:18:35 2012] Setting source spectrum file to fullrun_mos1_xmm0412990501_pi300-10000_pass1_cl_src17_src_b10.pi.gz [Sat May 5 04:18:35 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412990501_pi300-10000_pass1_cl_src17_bgd.pi.gz [Sat May 5 23:27:12 2012] Updating aperture counts using extracted products [Sat May 5 23:27:12 2012] Error reading totcts from fullrun_mos1_xmm0412990501_pi300-10000_pass1_cl_src17_src_b10.pi.gz [Sat May 5 23:27:16 2012] Calculating source flux in energy range 0.30-8.00 [Sat May 5 23:27:16 2012] Using photon index=1.80, rate=0.00653, arf fullrun_mos1_xmm0412990501_pi300-10000_pass1_cl_src17.arf [Sat May 5 23:27:16 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sat May 5 23:27:16 2012] Updating source flux to 1e-13 [Sat May 5 23:27:35 2012] Flag b found in src. 17 procflags, skipping spectral fitting [Sat May 5 23:27:35 2012] Flag c found in src. 17 procflags, skipping spectral fitting