[Tue May  1 11:53:18 2012] Detection parameters:
  Position = (364.9, 216.0) = 8 48 56.31 -45 37 51.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 332.7 +/- 34.0
  Background counts = 304.2
  Rate = 0.01 +/- 0.001

[Tue May  1 11:53:27 2012] Off-axis axis estimate = 7.68'
[Wed May  2 01:37:14 2012] Using EEF radius (= 10.27 ")to estimate initial spatial extent for simple fitting
[Wed May  2 01:37:14 2012] Initial guess for spatial extent in simple fitting = 10.27"
[Wed May  2 01:37:14 2012] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.100
[Wed May  2 01:37:14 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 10.27"
[Wed May  2 08:13:14 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_src8.ximg exists
[Wed May  2 08:13:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_src8.csv
[Wed May  2 08:13:14 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_src8_1.ximg exists
[Wed May  2 08:13:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_src8.csv
[Wed May  2 08:13:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 08:13:17 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Wed May  2 08:13:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src8.csv
[Wed May  2 08:13:17 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Wed May  2 08:13:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src8.csv
[Wed May  2 08:13:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 17:37:46 2012] Warning, spatial fit 8 centroid is now closest to src. 14
[Wed May  2 17:37:46 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 13.377467 pixels away
[Wed May  2 17:37:46 2012] Spatial fit model total counts = 4744.320000, observed total counts = 4081.000000
[Wed May  2 17:37:46 2012] Poor agreement between spatial fit and data for source 16
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May  2 17:37:46 2012] Vigneting correction estimate = 1.000000
[Wed May  2 17:37:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 17:37:46 2012] Assessing source extent using major
[Wed May  2 17:37:46 2012] Source does appear to be extended
[Wed May  2 17:37:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 17:37:46 2012] Source is confused with source 17
[Wed May  2 17:37:46 2012] Source is confused with source 13
[Thu May  3 13:40:56 2012] Using EEF radius (= 10.27 ")to estimate initial spatial extent for simple fitting
[Thu May  3 13:40:56 2012] Initial guess for spatial extent in simple fitting = 10.27"
[Thu May  3 13:40:56 2012] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.100
[Thu May  3 13:40:56 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 10.27"
[Thu May  3 22:42:49 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_src7.ximg exists
[Thu May  3 22:42:49 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_src7_1.ximg exists
[Thu May  3 22:42:49 2012] Fit fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_src7 appears to have run properly
[Thu May  3 22:42:51 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Thu May  3 22:42:51 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Thu May  3 22:42:51 2012] Fit fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Fri May  4 10:41:11 2012] Spatial fit model total counts = 6924.010000, observed total counts = 6370.000000
[Fri May  4 10:41:11 2012] Offset between fit and detection position for source 16 = 2.056465 pixels
[Fri May  4 10:41:11 2012] 6307.858000 total counts/ 5569.240000 bgd. counts: snr = 9.897418
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 2.056465 pixels
  Position = (366.9, 216.4) = 8 48 55.48 -45 37 46.7
  Extent = 20.2" x 12.6", rotation angle = 360
  Source counts = 738.6 +/- 79.4
  Background counts = 5569.2
  Rate = 0.01 +/- 0.001
[Fri May  4 10:41:11 2012] Vigneting correction estimate = 1.000000
[Fri May  4 10:41:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 10:41:11 2012] Assessing source extent using major
[Fri May  4 10:41:11 2012] Source does appear to be extended
[Fri May  4 10:41:11 2012] Computing asymmetry using major and minor axis, asym = 1.60
[Fri May  4 10:41:11 2012] Source is asymmetric
[Sat May  5 04:11:08 2012] XMMSAS src. selection expression = ellipse(31869.522176, 18775.173202, 1209.198035, 754.465864, 359.999493, X, Y)
[Sat May  5 04:11:08 2012] Writing source region out to fullrun_mos1_xmm0412990501_pi300-10000_pass1_cl_src16_src.reg
[Sat May  5 04:11:08 2012] Extracting stamp from image fullrun_mos1_xmm0412990501_pi300-10000_cl_sm2.00.img.gz, (297, 147) - (436, 286)
[Sat May  5 04:11:08 2012] XMMSAS bgd. selection expression = annulus(31869.522176, 18775.173202, 2015.330058, 4030.660116, X, Y) && !ellipse(32670.235809, 16664.276199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27637.418030, 20387.333511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30748.783142, 18615.036407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32083.378000, 18791.446600, 1679.616048, 652.529619, 27.697000, X, Y) && !ellipse(32748.405182, 17785.662338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33238.120000, 17649.356000, 1807.872052, 1807.872052, 0.000000, X, Y) && !ellipse(28330.612000, 20357.651400, 1455.128042, 575.486417, 19.200600, X, Y) && !ellipse(28214.969400, 21366.659280, 1367.288039, 832.064024, 14.819000, X, Y) && !ellipse(32026.059326, 18131.831696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32122.386600, 17173.199600, 740.360021, 740.360021, 0.000000, X, Y) && !ellipse(30741.328000, 19801.222000, 1512.152044, 1512.152044, 0.000000, X, Y) && !ellipse(31032.056000, 19573.846000, 1547.144045, 1286.568037, 46.048200, X, Y) && !ellipse(30306.736000, 20102.018000, 2482.400071, 1548.872045, 48.384000, X, Y) && !ellipse(30077.778000, 19868.652000, 2951.872085, 2951.872085, 0.000000, X, Y) && !ellipse(29807.840000, 20368.940000, 3024.304087, 3024.304087, 0.000000, X, Y) && !ellipse(26945.044000, 21612.522000, 1355.672039, 1355.672039, 0.000000, X, Y) && !ellipse(27508.208374, 21274.672180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28631.213818, 20166.708085, 1367.288039, 1177.754645, 49.203107, X, Y) && !ellipse(34140.364400, 16041.186000, 1674.056048, 1674.056048, 0.000000, X, Y) && !ellipse(32922.755646, 16145.954742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27518.456787, 21851.856964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34248.879800, 16048.723200, 990.864029, 990.864029, 0.000000, X, Y) && !ellipse(33579.835571, 17089.225586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36260.695648, 14653.391525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34019.139374, 16564.282486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35495.633026, 15913.737915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35900.455963, 23263.092651, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May  5 04:11:08 2012] Writing fullrun_mos1_xmm0412990501_pi300-10000_pass1_cl_src16.gif
[Sat May  5 04:15:31 2012] Mean detx,y = (7230.17, -4960.72) 
[Sat May  5 04:15:34 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May  5 04:16:31 2012] Binned source spectrum to 10 counts/bin
[Sat May  5 04:16:32 2012] Setting source spectrum file to fullrun_mos1_xmm0412990501_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sat May  5 04:16:32 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412990501_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Sat May  5 23:27:12 2012] Updating aperture counts using extracted products
[Sat May  5 23:27:12 2012] Error reading totcts from fullrun_mos1_xmm0412990501_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sat May  5 23:27:16 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 23:27:16 2012] Using photon index=1.80, rate=0.0126, arf fullrun_mos1_xmm0412990501_pi300-10000_pass1_cl_src16.arf
[Sat May  5 23:27:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 23:27:16 2012] Updating source flux to 1.8e-13
[Sat May  5 23:27:35 2012] Flag p found in src. 16 procflags, skipping spectral fitting
[Sat May  5 23:27:35 2012] Flag c found in src. 16 procflags, skipping spectral fitting