[Tue May  1 11:53:18 2012] Detection parameters:
  Position = (348.9, 228.0) = 8 49 2.92 -45 36 57.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 305.5 +/- 33.3
  Background counts = 321.5
  Rate = 0.007 +/- 0.0008

[Tue May  1 11:53:27 2012] Off-axis axis estimate = 6.28'
[Wed May  2 01:37:14 2012] Using EEF radius (= 9.57 ")to estimate initial spatial extent for simple fitting
[Wed May  2 01:37:14 2012] Initial guess for spatial extent in simple fitting = 9.57"
[Wed May  2 01:37:14 2012] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.234
[Wed May  2 01:37:14 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 9.57"
[Wed May  2 08:13:14 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_src18.ximg exists
[Wed May  2 08:13:14 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_src18_1.ximg exists
[Wed May  2 08:13:14 2012] Fit fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_src18 appears to have run properly
[Wed May  2 08:13:17 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Wed May  2 08:13:17 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Wed May  2 08:13:17 2012] Fit fullrun_mos1_xmm0412990501_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Wed May  2 17:37:46 2012] Source 15 is offset by 1.661346 and 6.941361 pixels which is larger than
2 X fitted extent = 1.213549 x 1.213549, not incorporating fit results
[Wed May  2 17:37:46 2012] Warning, spatial fit 18 centroid is now closest to src. 14
[Wed May  2 17:37:46 2012] Spatial fit model total counts = 4495.200000, observed total counts = 4495.000000
[Wed May  2 17:37:46 2012] Offset between fit and detection position for source 15 = 5.069875 pixels
[Wed May  2 17:37:46 2012] Warning, changing simple spatial fit ID from 18 to 23
[Wed May  2 17:37:46 2012] 4297.270000 total counts/ 3484.190000 bgd. counts: snr = 13.774707
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 5.069875 pixels
  Position = (354.0, 228.5) = 8 49 0.83 -45 36 54.1
  Extent = 18.9 (18.9-37.8)", rotation angle = 0
  Source counts = 813.1 +/- 65.6
  Background counts = 3484.2
  Rate = 0.01 +/- 0.001
[Wed May  2 17:37:46 2012] Vigneting correction estimate = 1.000000
[Wed May  2 17:37:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 17:37:46 2012] Assessing source extent using major axis lower bound
[Wed May  2 17:37:46 2012] Source does appear to be extended
[Wed May  2 17:37:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 17:37:46 2012] Source is confused with source 13
[Wed May  2 17:37:46 2012] Source is confused with source 42
[Thu May  3 13:40:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  3 13:40:56 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May  3 13:40:56 2012] Initial guess for spatial extent in simple fitting = 18.90"
[Thu May  3 13:40:56 2012] source mask rpix=4.3, npix_max = 93, mask sum = 90, frac = 0.958
[Thu May  3 13:40:56 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 18.90"
[Thu May  3 22:42:50 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_src17.ximg exists
[Thu May  3 22:42:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_src17.csv
[Thu May  3 22:42:50 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_src17_1.ximg exists
[Thu May  3 22:42:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_src17.csv
[Thu May  3 22:42:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 22:42:51 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Thu May  3 22:42:51 2012] fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Thu May  3 22:42:51 2012] Fit fullrun_mos1_xmm0412990501_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Fri May  4 10:41:11 2012] Warning, spatial fit 17 centroid is now closest to src. 41
[Fri May  4 10:41:11 2012] Spatial fit model total counts = 4491.190000, observed total counts = 4495.000000
[Fri May  4 10:41:11 2012] Offset between fit and detection position for source 15 = 0.331314 pixels
[Fri May  4 10:41:11 2012] Warning, changing simple spatial fit ID from 17 to 19
[Fri May  4 10:41:11 2012] 4352.654000 total counts/ 3604.610000 bgd. counts: snr = 12.459425
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.331314 pixels
  Position = (353.9, 228.2) = 8 49 0.86 -45 36 55.5
  Extent = 18.9 (18.9-37.8)", rotation angle = 0
  Source counts = 748.0 +/- 66.0
  Background counts = 3604.6
  Rate = 0.01 +/- 0.001
[Fri May  4 10:41:11 2012] Vigneting correction estimate = 1.000000
[Fri May  4 10:41:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 10:41:11 2012] Assessing source extent using major axis lower bound
[Fri May  4 10:41:11 2012] Source does appear to be extended
[Fri May  4 10:41:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  5 04:11:09 2012] XMMSAS src. selection expression = ellipse(30741.328000, 19801.222000, 1134.114033, 1134.114033, 0.000000, X, Y)
[Sat May  5 04:11:09 2012] Writing source region out to fullrun_mos1_xmm0412990501_pi300-10000_pass1_cl_src15_src.reg
[Sat May  5 04:11:09 2012] Extracting stamp from image fullrun_mos1_xmm0412990501_pi300-10000_cl_sm2.00.img.gz, (289, 163) - (419, 293)
[Sat May  5 04:11:09 2012] XMMSAS bgd. selection expression = annulus(30741.328000, 19801.222000, 1890.190054, 3780.380109, X, Y) && !ellipse(32670.235809, 16664.276199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26211.059296, 17283.393188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27637.418030, 20387.333511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31869.522176, 18775.173202, 1612.264046, 1005.954485, 359.999493, X, Y) && !ellipse(30748.783142, 18615.036407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32083.378000, 18791.446600, 1679.616048, 652.529619, 27.697000, X, Y) && !ellipse(32748.405182, 17785.662338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33238.120000, 17649.356000, 1807.872052, 1807.872052, 0.000000, X, Y) && !ellipse(28330.612000, 20357.651400, 1455.128042, 575.486417, 19.200600, X, Y) && !ellipse(28214.969400, 21366.659280, 1367.288039, 832.064024, 14.819000, X, Y) && !ellipse(32026.059326, 18131.831696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32122.386600, 17173.199600, 740.360021, 740.360021, 0.000000, X, Y) && !ellipse(31032.056000, 19573.846000, 1547.144045, 1286.568037, 46.048200, X, Y) && !ellipse(30306.736000, 20102.018000, 2482.400071, 1548.872045, 48.384000, X, Y) && !ellipse(30077.778000, 19868.652000, 2951.872085, 2951.872085, 0.000000, X, Y) && !ellipse(29807.840000, 20368.940000, 3024.304087, 3024.304087, 0.000000, X, Y) && !ellipse(26945.044000, 21612.522000, 1355.672039, 1355.672039, 0.000000, X, Y) && !ellipse(27508.208374, 21274.672180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28631.213818, 20166.708085, 1367.288039, 1177.754645, 49.203107, X, Y) && !ellipse(24788.124000, 19383.986000, 2971.520086, 2971.520086, 0.000000, X, Y) && !ellipse(25599.942000, 18650.358000, 1485.760043, 1485.760043, 0.000000, X, Y) && !ellipse(34140.364400, 16041.186000, 1674.056048, 1674.056048, 0.000000, X, Y) && !ellipse(32922.755646, 16145.954742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27518.456787, 21851.856964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34248.879800, 16048.723200, 990.864029, 990.864029, 0.000000, X, Y) && !ellipse(33579.835571, 17089.225586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26675.832794, 21088.359482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34019.139374, 16564.282486, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May  5 04:11:09 2012] Writing fullrun_mos1_xmm0412990501_pi300-10000_pass1_cl_src15.gif
[Sat May  5 04:24:48 2012] Mean detx,y = (5832.12, -4120.59) 
[Sat May  5 04:24:51 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May  5 04:25:58 2012] Binned source spectrum to 10 counts/bin
[Sat May  5 04:25:58 2012] Setting source spectrum file to fullrun_mos1_xmm0412990501_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sat May  5 04:25:58 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412990501_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Sat May  5 23:27:13 2012] Updating aperture counts using extracted products
[Sat May  5 23:27:13 2012] Error reading totcts from fullrun_mos1_xmm0412990501_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sat May  5 23:27:17 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 23:27:17 2012] Using photon index=1.80, rate=0.0128, arf fullrun_mos1_xmm0412990501_pi300-10000_pass1_cl_src15.arf
[Sat May  5 23:27:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 23:27:17 2012] Updating source flux to 1.5e-13
[Sat May  5 23:27:35 2012] Flag b found in src. 15 procflags, skipping spectral fitting
[Sat May  5 23:27:35 2012] Flag c found in src. 15 procflags, skipping spectral fitting