[Thu Mar  8 18:38:56 2012] Detection parameters:
  Position = (249.3, 227.6) = 8 49 6.15 -45 41 56.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 244.4 +/- 54.0
  Background counts = 1587.0
  Rate = 0.005 +/- 0.001

[Thu Mar  8 18:38:57 2012] Off-axis axis estimate = 6.25'
[Thu Mar  8 18:54:51 2012] Using EEF radius (= 9.55 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 18:54:51 2012] Initial guess for spatial extent in simple fitting = 9.55"
[Thu Mar  8 18:54:51 2012] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.860
[Thu Mar  8 18:54:51 2012] Giving source the simple spatial ID 83 for pass 0, mean size = 9.55"
[Fri Mar  9 12:30:34 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src83.ximg exists
[Fri Mar  9 12:30:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src83.csv
[Fri Mar  9 12:30:34 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src83_1.ximg exists
[Fri Mar  9 12:30:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src83.csv
[Fri Mar  9 12:30:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src83_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 12:30:37 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src83.ximg exists
[Fri Mar  9 12:30:37 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src83_1.ximg exists
[Fri Mar  9 12:30:37 2012] Fit fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src83 appears to have run properly
[Sat Mar 10 02:13:55 2012] Source 96 is offset by 8.324141 and -4.562601 pixels which is larger than
2 X fitted extent = 1.481517 x 1.481517, not incorporating fit results
[Sat Mar 10 02:13:55 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 02:13:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 02:13:55 2012] Assessing source extent using major
[Sat Mar 10 02:13:55 2012] Source does appear to be extended
[Sat Mar 10 02:13:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 02:13:55 2012] Source is confused with source 100
[Sat Mar 10 02:13:55 2012] Source is confused with source 102
[Sat Mar 10 02:14:50 2012] Using EEF radius (= 9.55 ")to estimate initial spatial extent for simple fitting
[Sat Mar 10 02:14:50 2012] Initial guess for spatial extent in simple fitting = 9.55"
[Sat Mar 10 02:14:50 2012] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.860
[Sat Mar 10 02:14:50 2012] Giving source the simple spatial ID 64 for pass 1, mean size = 9.55"
[Sat Mar 10 23:47:41 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src64.ximg exists
[Sat Mar 10 23:47:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src64.csv
[Sat Mar 10 23:47:41 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src64_1.ximg exists
[Sat Mar 10 23:47:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src64.csv
[Sat Mar 10 23:47:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src64_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 23:47:44 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src64.ximg exists
[Sat Mar 10 23:47:44 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src64_1.ximg exists
[Sat Mar 10 23:47:44 2012] Fit fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src64 appears to have run properly
[Sun Mar 11 16:12:25 2012] Warning, spatial fit 64 centroid is now closest to src. 98
[Sun Mar 11 16:12:25 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 16:12:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 16:12:25 2012] Assessing source extent using major
[Sun Mar 11 16:12:25 2012] Source does appear to be extended
[Sun Mar 11 16:12:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 11 16:13:48 2012] XMMSAS src. selection expression = ellipse(21637.560257, 19756.527756, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Mar 11 16:13:48 2012] Writing source region out to fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src96_src.reg
[Sun Mar 11 16:13:48 2012] Extracting stamp from image fullrun_pn_xmm0412990201_pi300-10000_cl_sm2.00.img.gz, (212, 190) - (287, 265)
[Sun Mar 11 16:13:48 2012] XMMSAS bgd. selection expression = annulus(21637.560257, 19756.527756, 1087.500000, 2175.000000, X, Y) && !ellipse(23955.301270, 22391.526184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23951.206000, 23736.002000, 3478.800100, 3478.800100, 0.000000, X, Y) && !ellipse(25800.766000, 22259.256000, 2217.848064, 2217.848064, 0.000000, X, Y) && !ellipse(21575.968000, 19292.968000, 956.656028, 956.656028, 0.000000, X, Y) && !ellipse(21237.522600, 19064.684000, 789.601623, 789.601623, 0.000000, X, Y) && !ellipse(21998.078000, 18425.142000, 1589.952046, 1589.952046, 0.000000, X, Y) && !ellipse(24465.908800, 16365.482000, 2927.464084, 2927.464084, 0.000000, X, Y) && !ellipse(21089.274000, 17212.734000, 1633.720047, 1633.720047, 0.000000, X, Y)
[Sun Mar 11 16:13:48 2012] Writing fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src96.gif
[Sun Mar 11 21:37:40 2012] Mean detx,y = (4577.35, -3484.80) 
[Sun Mar 11 21:37:48 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 11 21:38:10 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 11 21:38:10 2012] Setting source spectrum file to fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src96_src_b10.pi.gz
[Sun Mar 11 21:38:10 2012] Setting bgd. spectrum file to fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src96_bgd.pi.gz
[Wed Mar 14 09:07:31 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Mar 14 09:07:31 2012] rmf not generated due to insufficient counts
[Fri Mar 16 22:36:06 2012] Updating aperture counts using extracted products
[Fri Mar 16 22:36:06 2012] Error reading totcts from fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src96_src_b10.pi.gz
[Fri Mar 16 22:36:09 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 22:36:09 2012] Using photon index=1.80, rate=0.0055, arf fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src96.arf
[Fri Mar 16 22:36:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 22:36:09 2012] Updating source flux to 1.7e-14
[Fri Mar 16 22:56:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting