[Thu Mar 8 18:38:54 2012] Detection parameters: Position = (346.7, 303.8) = 8 48 25.73 -45 36 27.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 301.3 +/- 46.6 Background counts = 1085.2 Rate = 0.007 +/- 0.001 [Thu Mar 8 18:38:57 2012] Off-axis axis estimate = 3.52' [Thu Mar 8 18:54:51 2012] Using EEF radius (= 8.19 ")to estimate initial spatial extent for simple fitting [Thu Mar 8 18:54:51 2012] Initial guess for spatial extent in simple fitting = 8.19" [Thu Mar 8 18:54:51 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.101 [Thu Mar 8 18:54:51 2012] Giving source the simple spatial ID 65 for pass 0, mean size = 8.19" [Fri Mar 9 12:30:34 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src65.ximg exists [Fri Mar 9 12:30:34 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src65.csv [Fri Mar 9 12:30:34 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src65_1.ximg exists [Fri Mar 9 12:30:34 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src65.csv [Fri Mar 9 12:30:34 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src65_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Mar 9 12:30:36 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src65.ximg exists [Fri Mar 9 12:30:37 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src65.csv [Fri Mar 9 12:30:37 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists [Fri Mar 9 12:30:37 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src65.csv [Fri Mar 9 12:30:37 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src65_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Mar 10 02:13:55 2012] Spatial fit model total counts = 12131.100000, observed total counts = 12125.000000 [Sat Mar 10 02:13:55 2012] Offset between fit and detection position for source 77 = 0.325348 pixels [Sat Mar 10 02:13:55 2012] Warning, changing simple spatial fit ID from 65 to 64 [Sat Mar 10 02:13:55 2012] 12056.884600 total counts/ 11995.800000 bgd. counts: snr = 0.557721 Spatial fit parameters: Offset between fit and detection position for source 77 = 0.325348 pixels Position = (346.5, 303.6) = 8 48 25.82 -45 36 27.8 Extent = 2.1" x 2.1", rotation angle = 0 Source counts = 61.1 +/- 109.8 Background counts = 11995.8 Rate = 0.001 +/- 0.002 Deleting source due to low Poisson probability