[Thu Mar  8 18:38:54 2012] Detection parameters:
  Position = (197.9, 326.1) = 8 49 27.38 -45 34 51.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 288.3 +/- 49.7
  Background counts = 1271.3
  Rate = 0.008 +/- 0.001

[Thu Mar  8 18:38:57 2012] Off-axis axis estimate = 7.56'
[Thu Mar  8 18:54:51 2012] Using EEF radius (= 10.21 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 18:54:51 2012] Initial guess for spatial extent in simple fitting = 10.21"
[Thu Mar  8 18:54:51 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.111
[Thu Mar  8 18:54:51 2012] Giving source the simple spatial ID 61 for pass 0, mean size = 10.21"
[Fri Mar  9 12:30:34 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src61.ximg exists
[Fri Mar  9 12:30:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src61.csv
[Fri Mar  9 12:30:34 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src61_1.ximg exists
[Fri Mar  9 12:30:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src61.csv
[Fri Mar  9 12:30:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 12:30:36 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Fri Mar  9 12:30:36 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Fri Mar  9 12:30:36 2012] Fit fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src61 appears to have run properly
[Sat Mar 10 02:13:55 2012] Warning: source 59 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 73 at 10.947759 pixels away
[Sat Mar 10 02:13:55 2012] Warning, spatial fit 61 centroid is now closest to src. 75
[Sat Mar 10 02:13:55 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 02:13:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 02:13:55 2012] Assessing source extent using major
[Sat Mar 10 02:13:55 2012] Source does appear to be extended
[Sat Mar 10 02:13:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 02:13:55 2012] Source is confused with source 53
[Sat Mar 10 02:14:50 2012] Using EEF radius (= 10.21 ")to estimate initial spatial extent for simple fitting
[Sat Mar 10 02:14:50 2012] Initial guess for spatial extent in simple fitting = 10.21"
[Sat Mar 10 02:14:50 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.111
[Sat Mar 10 02:14:50 2012] Giving source the simple spatial ID 52 for pass 1, mean size = 10.21"
[Sat Mar 10 23:47:41 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src52.ximg exists
[Sat Mar 10 23:47:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src52.csv
[Sat Mar 10 23:47:41 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src52_1.ximg exists
[Sat Mar 10 23:47:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src52.csv
[Sat Mar 10 23:47:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src52_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 23:47:44 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src52.ximg exists
[Sat Mar 10 23:47:44 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src52_1.ximg exists
[Sat Mar 10 23:47:44 2012] Fit fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src52 appears to have run properly
[Sun Mar 11 16:12:25 2012] Source 73 is offset by -5.052746 and 6.269141 pixels which is larger than
2 X fitted extent = 2.230625 x 2.230625, not incorporating fit results
[Sun Mar 11 16:12:25 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 16:12:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 16:12:25 2012] Assessing source extent using major
[Sun Mar 11 16:12:25 2012] Source does appear to be extended
[Sun Mar 11 16:12:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 11 16:13:47 2012] XMMSAS src. selection expression = ellipse(17169.191086, 28320.971252, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Mar 11 16:13:47 2012] Writing source region out to fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src73_src.reg
[Sun Mar 11 16:13:47 2012] Extracting stamp from image fullrun_pn_xmm0412990201_pi300-10000_cl_sm2.00.img.gz, (160, 289) - (235, 364)
[Sun Mar 11 16:13:47 2012] XMMSAS bgd. selection expression = annulus(17169.191086, 28320.971252, 1087.500000, 2175.000000, X, Y) && !ellipse(16725.242310, 26040.611725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19481.442825, 26738.515381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14417.238617, 30223.180267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19859.263750, 28099.674000, 1486.344043, 1486.344043, -0.000000, X, Y) && !ellipse(19181.627625, 27259.193176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20142.538600, 26416.894000, 1424.872041, 1424.872041, 0.000000, X, Y) && !ellipse(16815.754913, 25348.790741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14872.803146, 31006.581177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18360.136000, 27735.894400, 1363.176039, 1363.176039, 0.000000, X, Y) && !ellipse(15762.014938, 31271.784088, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(13370.574000, 31245.110000, 1885.688054, 1885.688054, 0.000000, X, Y) && !ellipse(14570.735153, 29278.454468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17111.722977, 28749.479706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17773.854000, 28722.844200, 1616.880047, 1616.880047, 0.000000, X, Y) && !ellipse(18563.349625, 28212.654022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17883.960815, 26150.991913, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar 11 16:13:47 2012] Writing fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src73.gif
[Sun Mar 11 20:53:48 2012] Mean detx,y = (6842.66, 5912.88) 
[Sun Mar 11 20:53:57 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 11 20:54:59 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 11 20:54:59 2012] Setting source spectrum file to fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src73_src_b10.pi.gz
[Sun Mar 11 20:54:59 2012] Setting bgd. spectrum file to fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src73_bgd.pi.gz
[Wed Mar 14 07:02:20 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Mar 14 07:02:20 2012] rmf not generated due to insufficient counts
[Fri Mar 16 22:36:06 2012] Updating aperture counts using extracted products
[Fri Mar 16 22:36:06 2012] Error reading totcts from fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src73_src_b10.pi.gz
[Fri Mar 16 22:36:09 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 22:36:09 2012] Using photon index=1.80, rate=0.00784, arf fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src73.arf
[Fri Mar 16 22:36:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 22:36:09 2012] Updating source flux to 2.8e-14
[Fri Mar 16 22:56:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting