[Thu Mar  8 18:38:54 2012] Detection parameters:
  Position = (202.1, 330.1) = 8 49 25.65 -45 34 33.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 357.5 +/- 51.1
  Background counts = 1253.2
  Rate = 0.01 +/- 0.001

[Thu Mar  8 18:38:57 2012] Off-axis axis estimate = 7.35'
[Thu Mar  8 18:54:51 2012] Using EEF radius (= 10.11 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 18:54:51 2012] Initial guess for spatial extent in simple fitting = 10.11"
[Thu Mar  8 18:54:51 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.129
[Thu Mar  8 18:54:51 2012] Giving source the simple spatial ID 60 for pass 0, mean size = 10.11"
[Fri Mar  9 12:30:34 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src60.ximg exists
[Fri Mar  9 12:30:34 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src60_1.ximg exists
[Fri Mar  9 12:30:34 2012] Fit fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src60 appears to have run properly
[Fri Mar  9 12:30:36 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src60.ximg exists
[Fri Mar  9 12:30:36 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src60_1.ximg exists
[Fri Mar  9 12:30:36 2012] Fit fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src60 appears to have run properly
[Sat Mar 10 02:13:55 2012] Warning: source 60 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 72 at 13.745681 pixels away
[Sat Mar 10 02:13:55 2012] Source 72 is offset by -5.156601 and -2.791753 pixels which is larger than
2 X fitted extent = 1.107816 x 1.107816, not incorporating fit results
[Sat Mar 10 02:13:55 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 02:13:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 02:13:55 2012] Assessing source extent using major
[Sat Mar 10 02:13:55 2012] Source does appear to be extended
[Sat Mar 10 02:13:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 02:13:55 2012] Source is confused with source 53
[Sat Mar 10 02:14:50 2012] Using EEF radius (= 10.11 ")to estimate initial spatial extent for simple fitting
[Sat Mar 10 02:14:50 2012] Initial guess for spatial extent in simple fitting = 10.11"
[Sat Mar 10 02:14:50 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.129
[Sat Mar 10 02:14:50 2012] Giving source the simple spatial ID 51 for pass 1, mean size = 10.11"
[Sat Mar 10 23:47:41 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src51.ximg exists
[Sat Mar 10 23:47:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src51.csv
[Sat Mar 10 23:47:41 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src51_1.ximg exists
[Sat Mar 10 23:47:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src51.csv
[Sat Mar 10 23:47:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 23:47:44 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Sat Mar 10 23:47:44 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Sat Mar 10 23:47:44 2012] Fit fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src51 appears to have run properly
[Sun Mar 11 16:12:25 2012] Warning: source 50 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 72 at 11.501908 pixels away
[Sun Mar 11 16:12:25 2012] Spatial fit model total counts = 14861.500000, observed total counts = 14818.000000
[Sun Mar 11 16:12:25 2012] Offset between fit and detection position for source 72 = 2.847752 pixels
[Sun Mar 11 16:12:25 2012] 14445.312000 total counts/ 13565.000000 bgd. counts: snr = 7.558345
Spatial fit parameters:
  Offset between fit and detection position for source 72 = 2.847752 pixels
  Position = (204.9, 330.7) = 8 49 24.50 -45 34 29.4
  Extent = 20.2 (20.2-40.4)", rotation angle = 0
  Source counts = 880.3 +/- 120.2
  Background counts = 13565.0
  Rate = 0.01 +/- 0.002
[Sun Mar 11 16:12:25 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 16:12:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 16:12:25 2012] Assessing source extent using major axis lower bound
[Sun Mar 11 16:12:25 2012] Source does appear to be extended
[Sun Mar 11 16:12:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 11 16:13:47 2012] XMMSAS src. selection expression = ellipse(17773.854000, 28722.844200, 1212.660035, 1212.660035, 0.000000, X, Y)
[Sun Mar 11 16:13:47 2012] Writing source region out to fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src72_src.reg
[Sun Mar 11 16:13:47 2012] Extracting stamp from image fullrun_pn_xmm0412990201_pi300-10000_cl_sm2.00.img.gz, (135, 261) - (275, 400)
[Sun Mar 11 16:13:47 2012] XMMSAS bgd. selection expression = annulus(17773.854000, 28722.844200, 2021.100058, 4042.200116, X, Y) && !ellipse(20193.545578, 23882.123352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16725.242310, 26040.611725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22948.534000, 25908.908000, 1205.152035, 1205.152035, 0.000000, X, Y) && !ellipse(17311.653320, 24828.481995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17257.441605, 24165.600830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21457.408554, 23916.107727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19481.442825, 26738.515381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14417.238617, 30223.180267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19859.263750, 28099.674000, 1486.344043, 1486.344043, -0.000000, X, Y) && !ellipse(19181.627625, 27259.193176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21811.407593, 26649.131165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20142.538600, 26416.894000, 1424.872041, 1424.872041, 0.000000, X, Y) && !ellipse(22780.268000, 25187.704000, 2429.536070, 2429.536070, 0.000000, X, Y) && !ellipse(21144.096512, 25368.145905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20785.960938, 26313.577942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23064.868000, 25509.182000, 2230.824064, 1185.344034, 223.945000, X, Y) && !ellipse(16815.754913, 25348.790741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23951.206000, 23736.002000, 3478.800100, 3478.800100, 0.000000, X, Y) && !ellipse(14872.803146, 31006.581177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18360.136000, 27735.894400, 1363.176039, 1363.176039, 0.000000, X, Y) && !ellipse(15762.014938, 31271.784088, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(14876.001129, 31611.088867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13370.574000, 31245.110000, 1885.688054, 1885.688054, 0.000000, X, Y) && !ellipse(13346.195816, 30586.369690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13819.891541, 29539.558014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14570.735153, 29278.454468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17111.722977, 28749.479706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17169.191086, 28320.971252, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18563.349625, 28212.654022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17883.960815, 26150.991913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18123.082000, 23592.400000, 1558.536045, 1558.536045, 0.000000, X, Y)
[Sun Mar 11 16:13:47 2012] Writing fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src72.gif
[Sun Mar 11 20:51:12 2012] Mean detx,y = (6210.36, 6077.80) 
[Sun Mar 11 20:51:23 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 11 20:52:12 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 11 20:52:13 2012] Setting source spectrum file to fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src72_src_b10.pi.gz
[Sun Mar 11 20:52:13 2012] Setting bgd. spectrum file to fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src72_bgd.pi.gz
[Fri Mar 16 22:36:06 2012] Updating aperture counts using extracted products
[Fri Mar 16 22:36:06 2012] Error reading totcts from fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src72_src_b10.pi.gz
[Fri Mar 16 22:36:09 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 22:36:09 2012] Using photon index=1.80, rate=0.0144, arf fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src72.arf
[Fri Mar 16 22:36:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 22:36:09 2012] Updating source flux to 4.6e-14
[Fri Mar 16 22:56:53 2012] Flag b found in src. 72 procflags, skipping spectral fitting
[Fri Mar 16 22:56:53 2012] Flag c found in src. 72 procflags, skipping spectral fitting