[Thu Mar  8 18:38:54 2012] Detection parameters:
  Position = (159.4, 340.1) = 8 49 43.32 -45 33 46.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 249.4 +/- 45.0
  Background counts = 942.4
  Rate = 0.004 +/- 0.0007

[Thu Mar  8 18:38:57 2012] Off-axis axis estimate = 10.52'
[Thu Mar  8 18:54:51 2012] Using EEF radius (= 11.69 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 18:54:51 2012] Initial guess for spatial extent in simple fitting = 11.69"
[Thu Mar  8 18:54:51 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.034
[Thu Mar  8 18:54:51 2012] Giving source the simple spatial ID 57 for pass 0, mean size = 11.69"
[Fri Mar  9 12:30:33 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src57.ximg exists
[Fri Mar  9 12:30:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src57.csv
[Fri Mar  9 12:30:33 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src57_1.ximg exists
[Fri Mar  9 12:30:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src57.csv
[Fri Mar  9 12:30:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src57_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 12:30:36 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src57.ximg exists
[Fri Mar  9 12:30:36 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src57_1.ximg exists
[Fri Mar  9 12:30:36 2012] Fit fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src57 appears to have run properly
[Sat Mar 10 02:13:55 2012] Source 69 is offset by -4.968396 and -1.554758 pixels which is larger than
2 X fitted extent = 1.532593 x 1.532593, not incorporating fit results
[Sat Mar 10 02:13:55 2012] Warning, spatial fit 57 centroid is now closest to src. 52
[Sat Mar 10 02:13:55 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 02:13:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 02:13:55 2012] Assessing source extent using major
[Sat Mar 10 02:13:55 2012] Source does appear to be extended
[Sat Mar 10 02:13:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 02:13:55 2012] Source is confused with source 52
[Sat Mar 10 02:14:50 2012] Using EEF radius (= 11.69 ")to estimate initial spatial extent for simple fitting
[Sat Mar 10 02:14:50 2012] Initial guess for spatial extent in simple fitting = 11.69"
[Sat Mar 10 02:14:50 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.034
[Sat Mar 10 02:14:50 2012] Giving source the simple spatial ID 48 for pass 1, mean size = 11.69"
[Sat Mar 10 23:47:40 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src48.ximg exists
[Sat Mar 10 23:47:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src48.csv
[Sat Mar 10 23:47:40 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src48_1.ximg exists
[Sat Mar 10 23:47:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src48.csv
[Sat Mar 10 23:47:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src48_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 23:47:43 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Sat Mar 10 23:47:43 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Sat Mar 10 23:47:43 2012] Fit fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src48 appears to have run properly
[Sun Mar 11 16:12:25 2012] Warning, spatial fit 48 centroid is now closest to src. 70
[Sun Mar 11 16:12:25 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 16:12:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 16:12:25 2012] Assessing source extent using major
[Sun Mar 11 16:12:25 2012] Source does appear to be extended
[Sun Mar 11 16:12:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 11 16:13:47 2012] XMMSAS src. selection expression = ellipse(13819.891541, 29539.558014, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Mar 11 16:13:47 2012] Writing source region out to fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src69_src.reg
[Sun Mar 11 16:13:47 2012] Extracting stamp from image fullrun_pn_xmm0412990201_pi300-10000_cl_sm2.00.img.gz, (122, 303) - (197, 378)
[Sun Mar 11 16:13:47 2012] XMMSAS bgd. selection expression = annulus(13819.891541, 29539.558014, 1087.500000, 2175.000000, X, Y) && !ellipse(14417.238617, 30223.180267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14872.803146, 31006.581177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15762.014938, 31271.784088, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(14876.001129, 31611.088867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13370.574000, 31245.110000, 1885.688054, 1885.688054, 0.000000, X, Y) && !ellipse(13346.195816, 30586.369690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14570.735153, 29278.454468, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar 11 16:13:47 2012] Writing fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src69.gif
[Sun Mar 11 20:45:15 2012] Mean detx,y = (9792.79, 7900.43) 
[Sun Mar 11 20:45:24 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 11 20:45:50 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 11 20:45:51 2012] Setting source spectrum file to fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src69_src_b10.pi.gz
[Sun Mar 11 20:45:51 2012] Setting bgd. spectrum file to fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src69_bgd.pi.gz
[Wed Mar 14 06:57:46 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Mar 14 06:57:46 2012] rmf not generated due to insufficient counts
[Fri Mar 16 22:36:06 2012] Updating aperture counts using extracted products
[Fri Mar 16 22:36:06 2012] Error reading totcts from fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src69_src_b10.pi.gz
[Fri Mar 16 22:36:09 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 22:36:09 2012] Using photon index=1.80, rate=0.00409, arf fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src69.arf
[Fri Mar 16 22:36:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 22:36:09 2012] Updating source flux to 2e-14
[Fri Mar 16 22:56:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting