[Thu Mar  8 18:38:53 2012] Detection parameters:
  Position = (310.6, 242.1) = 8 48 40.67 -45 40 56.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 655.9 +/- 61.2
  Background counts = 1502.1
  Rate = 0.01 +/- 0.001

[Thu Mar  8 18:38:57 2012] Off-axis axis estimate = 4.18'
[Thu Mar  8 18:54:51 2012] Using EEF radius (= 8.52 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 18:54:51 2012] Initial guess for spatial extent in simple fitting = 8.52"
[Thu Mar  8 18:54:51 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.034
[Thu Mar  8 18:54:51 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 8.52"
[Fri Mar  9 12:30:33 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src45.ximg exists
[Fri Mar  9 12:30:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src45.csv
[Fri Mar  9 12:30:33 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src45_1.ximg exists
[Fri Mar  9 12:30:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src45.csv
[Fri Mar  9 12:30:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 12:30:36 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Fri Mar  9 12:30:36 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Fri Mar  9 12:30:36 2012] Fit fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly
[Sat Mar 10 02:13:55 2012] Spatial fit model total counts = 20176.600000, observed total counts = 20159.000000
[Sat Mar 10 02:13:55 2012] Offset between fit and detection position for source 55 = 6.703800 pixels
[Sat Mar 10 02:13:55 2012] 20254.089000 total counts/ 19365.000000 bgd. counts: snr = 6.389053
Spatial fit parameters:
  Offset between fit and detection position for source 55 = 6.703800 pixels
  Position = (306.1, 247.0) = 8 48 42.56 -45 40 33.8
  Extent = 17.0 (17.0-34.1)", rotation angle = 0
  Source counts = 889.1 +/- 142.3
  Background counts = 19365.0
  Rate = 0.01 +/- 0.002
[Sat Mar 10 02:13:55 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 02:13:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 02:13:55 2012] Assessing source extent using major axis lower bound
[Sat Mar 10 02:13:55 2012] Source does appear to be extended
[Sat Mar 10 02:13:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 02:13:55 2012] Source is confused with source 44
[Sat Mar 10 02:14:50 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Mar 10 02:14:50 2012] Initial guess for spatial extent in simple fitting = 17.04"
[Sat Mar 10 02:14:50 2012] source mask rpix=3.9, npix_max = 78, mask sum = 64, frac = 0.820
[Sat Mar 10 02:14:50 2012] Giving source the simple spatial ID 42 for pass 1, mean size = 17.04"
[Sat Mar 10 23:47:40 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src42.ximg exists
[Sat Mar 10 23:47:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src42.csv
[Sat Mar 10 23:47:40 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src42_1.ximg exists
[Sat Mar 10 23:47:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src42.csv
[Sat Mar 10 23:47:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 23:47:43 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src42.ximg exists
[Sat Mar 10 23:47:43 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists
[Sat Mar 10 23:47:43 2012] Fit fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src42 appears to have run properly
[Sun Mar 11 16:12:25 2012] Warning, spatial fit 42 centroid is now closest to src. 40
[Sun Mar 11 16:12:25 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 16:12:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 16:12:25 2012] Assessing source extent using major axis lower bound
[Sun Mar 11 16:12:25 2012] Source does appear to be extended
[Sun Mar 11 16:12:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 11 16:13:47 2012] XMMSAS src. selection expression = ellipse(26580.100000, 21443.604000, 1022.142029, 1022.142029, 0.000000, X, Y)
[Sun Mar 11 16:13:47 2012] Writing source region out to fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src55_src.reg
[Sun Mar 11 16:13:47 2012] Extracting stamp from image fullrun_pn_xmm0412990201_pi300-10000_cl_sm2.00.img.gz, (247, 188) - (365, 306)
[Sun Mar 11 16:13:47 2012] XMMSAS bgd. selection expression = annulus(26580.100000, 21443.604000, 1703.570049, 3407.140098, X, Y) && !ellipse(29492.460449, 19425.063278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22948.534000, 25908.908000, 1205.152035, 1205.152035, 0.000000, X, Y) && !ellipse(23093.646000, 24700.392000, 1214.768035, 1214.768035, 0.000000, X, Y) && !ellipse(24334.312000, 24588.684000, 1171.144034, 1171.144034, 0.000000, X, Y) && !ellipse(26003.621857, 23663.964905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25085.841949, 23477.480957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24420.164000, 23352.518000, 1216.688035, 1216.688035, 0.000000, X, Y) && !ellipse(23955.301270, 22391.526184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24832.456573, 22435.283722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31199.698000, 17618.888000, 2927.464084, 2927.464084, 0.000000, X, Y) && !ellipse(22780.268000, 25187.704000, 2429.536070, 2429.536070, 0.000000, X, Y) && !ellipse(23730.758000, 24917.192000, 1204.648035, 1204.648035, 0.000000, X, Y) && !ellipse(23064.868000, 25509.182000, 2230.824064, 1185.344034, 223.945000, X, Y) && !ellipse(23568.354645, 24401.805511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24902.668400, 24255.636400, 1159.600033, 1159.600033, 0.000000, X, Y) && !ellipse(23690.452720, 23936.058600, 1223.704035, 1223.704035, 0.000000, X, Y) && !ellipse(23951.206000, 23736.002000, 3478.800100, 3478.800100, 0.000000, X, Y) && !ellipse(25800.766000, 22259.256000, 2217.848064, 2217.848064, 0.000000, X, Y) && !ellipse(26575.438171, 22657.374268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27375.990570, 22298.616089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26798.214000, 21525.422000, 1230.736035, 1230.736035, 0.000000, X, Y) && !ellipse(26551.534000, 21818.590000, 966.264028, 264.469608, 89.901000, X, Y) && !ellipse(25578.936646, 20929.794495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27902.485535, 21522.431549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28438.227966, 19882.733246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25426.386000, 23800.072000, 1159.600033, 1159.600033, 0.000000, X, Y) && !ellipse(27523.690000, 21022.888000, 2603.024075, 2603.024075, 0.000000, X, Y) && !ellipse(26505.478149, 20848.565201, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27701.454681, 19893.795425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30118.986298, 19003.387543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21998.078000, 18425.142000, 1589.952046, 1589.952046, 0.000000, X, Y) && !ellipse(30761.290000, 18131.464000, 1689.720049, 1689.720049, 0.000000, X, Y) && !ellipse(24465.908800, 16365.482000, 2927.464084, 2927.464084, 0.000000, X, Y)
[Sun Mar 11 16:13:47 2012] Writing fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src55.gif
[Sun Mar 11 20:33:42 2012] Mean detx,y = (-612.52, -2994.72) 
[Sun Mar 11 20:33:52 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 11 20:34:28 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 11 20:34:29 2012] Setting source spectrum file to fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Sun Mar 11 20:34:29 2012] Setting bgd. spectrum file to fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src55_bgd.pi.gz
[Fri Mar 16 22:36:05 2012] Updating aperture counts using extracted products
[Fri Mar 16 22:36:05 2012] Error reading totcts from fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Fri Mar 16 22:36:08 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 22:36:08 2012] Using photon index=1.80, rate=0.0146, arf fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src55.arf
[Fri Mar 16 22:36:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 22:36:08 2012] Updating source flux to 3.8e-14
[Fri Mar 16 22:56:53 2012] Flag c found in src. 55 procflags, skipping spectral fitting