[Thu Mar 8 18:38:53 2012] Detection parameters: Position = (148.5, 356.8) = 8 49 47.82 -45 32 34.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 302.9 +/- 43.0 Background counts = 698.8 Rate = 0.005 +/- 0.0007 [Thu Mar 8 18:38:57 2012] Off-axis axis estimate = 11.67' [Thu Mar 8 18:54:51 2012] Using EEF radius (= 12.26 ")to estimate initial spatial extent for simple fitting [Thu Mar 8 18:54:51 2012] Initial guess for spatial extent in simple fitting = 12.26" [Thu Mar 8 18:54:51 2012] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.112 [Thu Mar 8 18:54:51 2012] Giving source the simple spatial ID 40 for pass 0, mean size = 12.26" [Fri Mar 9 12:30:33 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src40.ximg exists [Fri Mar 9 12:30:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src40.csv [Fri Mar 9 12:30:33 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src40_1.ximg exists [Fri Mar 9 12:30:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src40.csv [Fri Mar 9 12:30:33 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src40_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Mar 9 12:30:36 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src40.ximg exists [Fri Mar 9 12:30:36 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists [Fri Mar 9 12:30:36 2012] Fit fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src40 appears to have run properly [Sat Mar 10 02:13:55 2012] Warning, spatial fit 40 centroid is now closest to src. 63 [Sat Mar 10 02:13:55 2012] Spatial fit model total counts = 11126.400000, observed total counts = 11120.000000 [Sat Mar 10 02:13:55 2012] Offset between fit and detection position for source 50 = 1.207609 pixels [Sat Mar 10 02:13:55 2012] Warning, changing simple spatial fit ID from 40 to 42 [Sat Mar 10 02:13:55 2012] 10920.600000 total counts/ 10920.600000 bgd. counts: snr = 0.000000 Spatial fit parameters: Offset between fit and detection position for source 50 = 1.207609 pixels Position = (149.2, 357.8) = 8 49 47.51 -45 32 31.1 Extent = 2.9 (2.9-43.9)", rotation angle = 0 Source counts = 0.0 +/- 104.5 Background counts = 10920.6 Rate = 6e-22 +/- 0.002 Deleting source due to low Poisson probability