[Thu Mar  8 18:38:52 2012] Detection parameters:
  Position = (315.2, 256.9) = 8 48 38.76 -45 39 50.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 659.1 +/- 58.9
  Background counts = 1470.2
  Rate = 0.01 +/- 0.001

[Thu Mar  8 18:38:57 2012] Off-axis axis estimate = 3.25'
[Thu Mar  8 18:54:51 2012] Using EEF radius (= 8.05 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 18:54:51 2012] Initial guess for spatial extent in simple fitting = 8.05"
[Thu Mar  8 18:54:51 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.904
[Thu Mar  8 18:54:51 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 8.05"
[Fri Mar  9 12:30:33 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src35.ximg exists
[Fri Mar  9 12:30:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src35.csv
[Fri Mar  9 12:30:33 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src35_1.ximg exists
[Fri Mar  9 12:30:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src35.csv
[Fri Mar  9 12:30:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 12:30:36 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Fri Mar  9 12:30:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src35.csv
[Fri Mar  9 12:30:36 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Fri Mar  9 12:30:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src35.csv
[Fri Mar  9 12:30:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 02:13:55 2012] Spatial fit model total counts = 10356.700000, observed total counts = 17627.000000
[Sat Mar 10 02:13:55 2012] Poor agreement between spatial fit and data for source 43
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Mar 10 02:13:55 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 02:13:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 02:13:55 2012] Assessing source extent using major
[Sat Mar 10 02:13:55 2012] Source does appear to be extended
[Sat Mar 10 02:13:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 02:14:50 2012] Using EEF radius (= 8.05 ")to estimate initial spatial extent for simple fitting
[Sat Mar 10 02:14:50 2012] Initial guess for spatial extent in simple fitting = 8.05"
[Sat Mar 10 02:14:50 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.904
[Sat Mar 10 02:14:50 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 8.05"
[Sat Mar 10 23:47:40 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src35.ximg exists
[Sat Mar 10 23:47:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src35.csv
[Sat Mar 10 23:47:40 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src35_1.ximg exists
[Sat Mar 10 23:47:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src35.csv
[Sat Mar 10 23:47:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 23:47:42 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Sat Mar 10 23:47:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src35.csv
[Sat Mar 10 23:47:42 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Sat Mar 10 23:47:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src35.csv
[Sat Mar 10 23:47:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 16:12:25 2012] Warning, spatial fit 35 centroid is now closest to src. 47
[Sun Mar 11 16:12:25 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 16:12:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 16:12:25 2012] Assessing source extent using major
[Sun Mar 11 16:12:25 2012] Source does appear to be extended
[Sun Mar 11 16:12:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 11 16:12:26 2012] Source is confused with source 40
[Sun Mar 11 16:12:26 2012] Source is confused with source 93
[Sun Mar 11 16:13:46 2012] XMMSAS src. selection expression = ellipse(27375.990570, 22298.616089, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Mar 11 16:13:46 2012] Writing source region out to fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src43_src.reg
[Sun Mar 11 16:13:46 2012] Extracting stamp from image fullrun_pn_xmm0412990201_pi300-10000_cl_sm2.00.img.gz, (278, 219) - (353, 294)
[Sun Mar 11 16:13:46 2012] XMMSAS bgd. selection expression = annulus(27375.990570, 22298.616089, 1087.500000, 2175.000000, X, Y) && !ellipse(29492.460449, 19425.063278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24334.312000, 24588.684000, 1171.144034, 1171.144034, 0.000000, X, Y) && !ellipse(26003.621857, 23663.964905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25085.841949, 23477.480957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24420.164000, 23352.518000, 1216.688035, 1216.688035, 0.000000, X, Y) && !ellipse(24832.456573, 22435.283722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31199.698000, 17618.888000, 2927.464084, 2927.464084, 0.000000, X, Y) && !ellipse(22780.268000, 25187.704000, 2429.536070, 2429.536070, 0.000000, X, Y) && !ellipse(23064.868000, 25509.182000, 2230.824064, 1185.344034, 223.945000, X, Y) && !ellipse(24902.668400, 24255.636400, 1159.600033, 1159.600033, 0.000000, X, Y) && !ellipse(23951.206000, 23736.002000, 3478.800100, 3478.800100, 0.000000, X, Y) && !ellipse(25800.766000, 22259.256000, 2217.848064, 2217.848064, 0.000000, X, Y) && !ellipse(26575.438171, 22657.374268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26798.214000, 21525.422000, 1230.736035, 1230.736035, 0.000000, X, Y) && !ellipse(26551.534000, 21818.590000, 966.264028, 264.469608, 89.901000, X, Y) && !ellipse(25578.936646, 20929.794495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27902.485535, 21522.431549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28438.227966, 19882.733246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26580.100000, 21443.604000, 1362.856039, 1362.856039, 0.000000, X, Y) && !ellipse(25426.386000, 23800.072000, 1159.600033, 1159.600033, 0.000000, X, Y) && !ellipse(27523.690000, 21022.888000, 2603.024075, 2603.024075, 0.000000, X, Y) && !ellipse(26505.478149, 20848.565201, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27701.454681, 19893.795425, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar 11 16:13:46 2012] Writing fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src43.gif
[Sun Mar 11 20:06:35 2012] Mean detx,y = (-1518.98, -2400.71) 
[Sun Mar 11 20:06:44 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 11 20:07:15 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 11 20:07:16 2012] Setting source spectrum file to fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Sun Mar 11 20:07:16 2012] Setting bgd. spectrum file to fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Wed Mar 14 06:31:55 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Mar 14 06:31:55 2012] rmf not generated due to insufficient counts
[Fri Mar 16 22:36:05 2012] Updating aperture counts using extracted products
[Fri Mar 16 22:36:05 2012] Error reading totcts from fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Fri Mar 16 22:36:08 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 22:36:08 2012] Using photon index=1.80, rate=0.0146, arf fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src43.arf
[Fri Mar 16 22:36:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 22:36:08 2012] Updating source flux to 4.3e-14
[Fri Mar 16 22:56:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting