[Thu Mar  8 18:38:50 2012] Detection parameters:
  Position = (192.8, 299.9) = 8 49 29.52 -45 36 39.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 783.8 +/- 43.7
  Background counts = 1326.9
  Rate = 0.01 +/- 0.0007

[Thu Mar  8 18:38:57 2012] Off-axis axis estimate = 7.66'
[Thu Mar  8 18:54:51 2012] Using EEF radius (= 10.26 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 18:54:51 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Mar  8 18:54:51 2012] Initial guess for spatial extent in simple fitting = 10.26"
[Thu Mar  8 18:54:51 2012] source mask rpix=2.4, npix_max = 32, mask sum = 18, frac = 0.551
[Thu Mar  8 18:54:51 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.26"
[Fri Mar  9 12:30:32 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src1.ximg exists
[Fri Mar  9 12:30:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src1.csv
[Fri Mar  9 12:30:32 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Mar  9 12:30:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src1.csv
[Fri Mar  9 12:30:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 12:30:35 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Mar  9 12:30:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Mar  9 12:30:35 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Mar  9 12:30:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Mar  9 12:30:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 02:13:54 2012] Warning, spatial fit 1 centroid is now closest to src. 78
[Sat Mar 10 02:13:55 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 02:13:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 02:13:55 2012] Assessing source extent using major
[Sat Mar 10 02:13:55 2012] Source does appear to be extended
[Sat Mar 10 02:13:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 02:14:50 2012] Using EEF radius (= 10.26 ")to estimate initial spatial extent for simple fitting
[Sat Mar 10 02:14:50 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Mar 10 02:14:50 2012] Initial guess for spatial extent in simple fitting = 10.26"
[Sat Mar 10 02:14:50 2012] source mask rpix=2.4, npix_max = 32, mask sum = 18, frac = 0.551
[Sat Mar 10 02:14:50 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 10.26"
[Sat Mar 10 23:47:39 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src1.ximg exists
[Sat Mar 10 23:47:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src1.csv
[Sat Mar 10 23:47:39 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Mar 10 23:47:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src1.csv
[Sat Mar 10 23:47:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 23:47:41 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Mar 10 23:47:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Mar 10 23:47:41 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Mar 10 23:47:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Mar 10 23:47:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 16:12:25 2012] Spatial fit model total counts = 23466.000000, observed total counts = 16664.000000
[Sun Mar 11 16:12:25 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Mar 11 16:12:25 2012] Source 3 is offset by -1.882693 and 0.736020 pixels which is larger than
2 X fitted extent = 1.184055 x 1.184055, not incorporating fit results
[Sun Mar 11 16:12:25 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 16:12:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 16:12:25 2012] Assessing source extent using major
[Sun Mar 11 16:12:25 2012] Source does appear to be extended
[Sun Mar 11 16:12:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 11 16:13:43 2012] XMMSAS src. selection expression = ellipse(16725.242310, 26040.611725, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Mar 11 16:13:43 2012] Writing source region out to fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src3_src.reg
[Sun Mar 11 16:13:43 2012] Extracting stamp from image fullrun_pn_xmm0412990201_pi300-10000_cl_sm2.00.img.gz, (155, 262) - (230, 337)
[Sun Mar 11 16:13:43 2012] XMMSAS bgd. selection expression = annulus(16725.242310, 26040.611725, 1087.500000, 2175.000000, X, Y) && !ellipse(17311.653320, 24828.481995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17257.441605, 24165.600830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17476.968719, 23443.573578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19481.442825, 26738.515381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19859.263750, 28099.674000, 1486.344043, 1486.344043, -0.000000, X, Y) && !ellipse(19181.627625, 27259.193176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20142.538600, 26416.894000, 1424.872041, 1424.872041, 0.000000, X, Y) && !ellipse(16815.754913, 25348.790741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18360.136000, 27735.894400, 1363.176039, 1363.176039, 0.000000, X, Y) && !ellipse(17111.722977, 28749.479706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17773.854000, 28722.844200, 1616.880047, 1616.880047, 0.000000, X, Y) && !ellipse(17169.191086, 28320.971252, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18563.349625, 28212.654022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17883.960815, 26150.991913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18123.082000, 23592.400000, 1558.536045, 1558.536045, 0.000000, X, Y)
[Sun Mar 11 16:13:43 2012] Writing fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src3.gif
[Sun Mar 11 16:24:59 2012] Mean detx,y = (7901.69, 3788.61) 
[Sun Mar 11 16:25:07 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 11 16:25:36 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 11 16:25:36 2012] Setting source spectrum file to fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Mar 11 16:25:36 2012] Setting bgd. spectrum file to fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Mar 11 22:36:59 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Mar 11 22:36:59 2012] rmf not generated due to insufficient counts
[Fri Mar 16 22:36:04 2012] Updating aperture counts using extracted products
[Fri Mar 16 22:36:04 2012] Error reading totcts from fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Mar 16 22:36:07 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 22:36:07 2012] Using photon index=1.80, rate=0.0128, arf fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src3.arf
[Fri Mar 16 22:36:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 22:36:07 2012] Updating source flux to 5.5e-14
[Fri Mar 16 22:56:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Mar 16 23:06:56 2012] xmm0412990201/analysis//spectral/fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete