[Thu Mar 8 18:38:50 2012] Detection parameters: Position = (232.7, 275.1) = 8 49 13.01 -45 38 38.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 4116.2 +/- 285.9 Background counts = 1760.2 Rate = 0.07 +/- 0.005 [Thu Mar 8 18:38:57 2012] Off-axis axis estimate = 5.06' [Thu Mar 8 18:54:51 2012] Using EEF radius (= 8.96 ")to estimate initial spatial extent for simple fitting [Thu Mar 8 18:54:51 2012] Initial guess for spatial extent in simple fitting = 8.96" [Thu Mar 8 18:54:51 2012] source mask rpix=2.1, npix_max = 26, mask sum = 7, frac = 0.267 [Thu Mar 8 18:54:51 2012] Skipping simple spatial due to low active detector fraction [Sat Mar 10 02:13:55 2012] Vigneting correction estimate = 1.000000 [Sat Mar 10 02:13:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Mar 10 02:13:55 2012] Assessing source extent using major [Sat Mar 10 02:13:55 2012] Source does appear to be extended [Sat Mar 10 02:13:55 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Mar 10 02:14:50 2012] Using EEF radius (= 8.96 ")to estimate initial spatial extent for simple fitting [Sat Mar 10 02:14:50 2012] Initial guess for spatial extent in simple fitting = 8.96" [Sat Mar 10 02:14:50 2012] source mask rpix=2.1, npix_max = 26, mask sum = 7, frac = 0.267 [Sat Mar 10 02:14:50 2012] Skipping simple spatial due to low active detector fraction [Sun Mar 11 16:12:25 2012] Source 2 is offset by 5.710110 and 0.107556 pixels which is larger than 2 X fitted extent = 1.119637 x 1.119637, not incorporating fit results [Sun Mar 11 16:12:25 2012] Vigneting correction estimate = 1.000000 [Sun Mar 11 16:12:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Mar 11 16:12:25 2012] Assessing source extent using major [Sun Mar 11 16:12:25 2012] Source does appear to be extended [Sun Mar 11 16:12:25 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Mar 11 16:13:43 2012] Counts = 4116.189941, rescaling region sizes by 2.000000 [Sun Mar 11 16:13:43 2012] XMMSAS src. selection expression = ellipse(20193.545578, 23882.123352, 1305.000000, 1305.000000, 0.000000, X, Y) [Sun Mar 11 16:13:43 2012] Writing source region out to fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src2_src.reg [Sun Mar 11 16:13:43 2012] Extracting stamp from image fullrun_pn_xmm0412990201_pi300-10000_cl_sm2.00.img.gz, (158, 200) - (308, 350) [Sun Mar 11 16:13:43 2012] XMMSAS bgd. selection expression = annulus(20193.545578, 23882.123352, 4350.000000, 8700.000000, X, Y) && !ellipse(29492.460449, 19425.063278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16725.242310, 26040.611725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22948.534000, 25908.908000, 1205.152035, 1205.152035, 0.000000, X, Y) && !ellipse(17311.653320, 24828.481995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23093.646000, 24700.392000, 1214.768035, 1214.768035, 0.000000, X, Y) && !ellipse(24334.312000, 24588.684000, 1171.144034, 1171.144034, 0.000000, X, Y) && !ellipse(17257.441605, 24165.600830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21457.408554, 23916.107727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26003.621857, 23663.964905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25085.841949, 23477.480957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17476.968719, 23443.573578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24420.164000, 23352.518000, 1216.688035, 1216.688035, 0.000000, X, Y) && !ellipse(23955.301270, 22391.526184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24832.456573, 22435.283722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31199.698000, 17618.888000, 2927.464084, 2927.464084, 0.000000, X, Y) && !ellipse(22764.626831, 15008.858795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19481.442825, 26738.515381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14417.238617, 30223.180267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19859.263750, 28099.674000, 1486.344043, 1486.344043, -0.000000, X, Y) && !ellipse(19181.627625, 27259.193176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21811.407593, 26649.131165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20142.538600, 26416.894000, 1424.872041, 1424.872041, 0.000000, X, Y) && !ellipse(28886.558868, 25929.793457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22780.268000, 25187.704000, 2429.536070, 2429.536070, 0.000000, X, Y) && !ellipse(21144.096512, 25368.145905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20785.960938, 26313.577942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23730.758000, 24917.192000, 1204.648035, 1204.648035, 0.000000, X, Y) && !ellipse(23064.868000, 25509.182000, 2230.824064, 1185.344034, 223.945000, X, Y) && !ellipse(16815.754913, 25348.790741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23568.354645, 24401.805511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24902.668400, 24255.636400, 1159.600033, 1159.600033, 0.000000, X, Y) && !ellipse(23690.452720, 23936.058600, 1223.704035, 1223.704035, 0.000000, X, Y) && !ellipse(23951.206000, 23736.002000, 3478.800100, 3478.800100, 0.000000, X, Y) && !ellipse(25800.766000, 22259.256000, 2217.848064, 2217.848064, 0.000000, X, Y) && !ellipse(26575.438171, 22657.374268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17921.976852, 22526.011383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27375.990570, 22298.616089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26798.214000, 21525.422000, 1230.736035, 1230.736035, 0.000000, X, Y) && !ellipse(26551.534000, 21818.590000, 966.264028, 264.469608, 89.901000, X, Y) && !ellipse(25578.936646, 20929.794495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27902.485535, 21522.431549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28438.227966, 19882.733246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14872.803146, 31006.581177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18360.136000, 27735.894400, 1363.176039, 1363.176039, 0.000000, X, Y) && !ellipse(26580.100000, 21443.604000, 1362.856039, 1362.856039, 0.000000, X, Y) && !ellipse(15762.014938, 31271.784088, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(14876.001129, 31611.088867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28165.389191, 32282.476746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13370.574000, 31245.110000, 1885.688054, 1885.688054, 0.000000, X, Y) && !ellipse(13346.195816, 30586.369690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13819.891541, 29539.558014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14570.735153, 29278.454468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17111.722977, 28749.479706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17773.854000, 28722.844200, 1616.880047, 1616.880047, 0.000000, X, Y) && !ellipse(17169.191086, 28320.971252, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18563.349625, 28212.654022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17883.960815, 26150.991913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25426.386000, 23800.072000, 1159.600033, 1159.600033, 0.000000, X, Y) && !ellipse(18958.590561, 22985.841217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18123.082000, 23592.400000, 1558.536045, 1558.536045, 0.000000, X, Y) && !ellipse(27523.690000, 21022.888000, 2603.024075, 2603.024075, 0.000000, X, Y) && !ellipse(26505.478149, 20848.565201, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21637.560257, 19756.527756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27701.454681, 19893.795425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21575.968000, 19292.968000, 956.656028, 956.656028, 0.000000, X, Y) && !ellipse(21237.522600, 19064.684000, 789.601623, 789.601623, 0.000000, X, Y) && !ellipse(21998.078000, 18425.142000, 1589.952046, 1589.952046, 0.000000, X, Y) && !ellipse(24465.908800, 16365.482000, 2927.464084, 2927.464084, 0.000000, X, Y) && !ellipse(21089.274000, 17212.734000, 1633.720047, 1633.720047, 0.000000, X, Y) [Sun Mar 11 16:13:43 2012] Writing fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src2.gif [Sun Mar 11 16:20:53 2012] Mean detx,y = (4949.97, 877.54) [Sun Mar 11 16:21:13 2012] Setting backscal keywords in source and bgd. spectrum [Sun Mar 11 16:23:33 2012] Binned source spectrum to 10 counts/bin [Sun Mar 11 16:23:33 2012] Setting source spectrum file to fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src2_src_b10.pi.gz [Sun Mar 11 16:23:33 2012] Setting bgd. spectrum file to fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src2_bgd.pi.gz [Sun Mar 11 22:36:32 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sun Mar 11 22:36:32 2012] rmf not generated due to insufficient counts [Fri Mar 16 22:36:04 2012] Updating aperture counts using extracted products [Fri Mar 16 22:36:04 2012] Error reading totcts from fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src2_src_b10.pi.gz [Fri Mar 16 22:36:07 2012] Calculating source flux in energy range 0.30-8.00 [Fri Mar 16 22:36:07 2012] Using photon index=1.80, rate=0.0674, arf fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src2.arf [Fri Mar 16 22:36:07 2012] Assuming count rate is from the 0.30-10.00 bandpass [Fri Mar 16 22:36:07 2012] Updating source flux to 3.8e-13 [Fri Mar 16 22:56:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Fri Mar 16 23:06:56 2012] xmm0412990201/analysis//spectral/fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete