[Thu Mar  8 18:38:51 2012] Detection parameters:
  Position = (286.0, 258.4) = 8 48 50.89 -45 39 39.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 986.5 +/- 54.3
  Background counts = 1893.0
  Rate = 0.03 +/- 0.002

[Thu Mar  8 18:38:57 2012] Off-axis axis estimate = 3.04'
[Thu Mar  8 18:54:51 2012] Using EEF radius (= 7.95 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 18:54:51 2012] Initial guess for spatial extent in simple fitting = 7.95"
[Thu Mar  8 18:54:51 2012] source mask rpix=1.8, npix_max = 21, mask sum = 13, frac = 0.600
[Thu Mar  8 18:54:51 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 7.95"
[Fri Mar  9 12:30:32 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src12.ximg exists
[Fri Mar  9 12:30:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src12.csv
[Fri Mar  9 12:30:32 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src12_1.ximg exists
[Fri Mar  9 12:30:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src12.csv
[Fri Mar  9 12:30:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 12:30:35 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Fri Mar  9 12:30:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src12.csv
[Fri Mar  9 12:30:35 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Fri Mar  9 12:30:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src12.csv
[Fri Mar  9 12:30:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 02:13:55 2012] Spatial fit model total counts = 26490.900000, observed total counts = 17988.000000
[Sat Mar 10 02:13:55 2012] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Mar 10 02:13:55 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 02:13:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 02:13:55 2012] Assessing source extent using major
[Sat Mar 10 02:13:55 2012] Source does appear to be extended
[Sat Mar 10 02:13:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 02:14:50 2012] Using EEF radius (= 7.95 ")to estimate initial spatial extent for simple fitting
[Sat Mar 10 02:14:50 2012] Initial guess for spatial extent in simple fitting = 7.95"
[Sat Mar 10 02:14:50 2012] source mask rpix=1.8, npix_max = 21, mask sum = 13, frac = 0.600
[Sat Mar 10 02:14:50 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 7.95"
[Sat Mar 10 23:47:39 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src12.ximg exists
[Sat Mar 10 23:47:39 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src12_1.ximg exists
[Sat Mar 10 23:47:39 2012] Fit fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src12 appears to have run properly
[Sat Mar 10 23:47:42 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Sat Mar 10 23:47:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src12.csv
[Sat Mar 10 23:47:42 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Sat Mar 10 23:47:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src12.csv
[Sat Mar 10 23:47:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 16:12:25 2012] Spatial fit model total counts = 47742.700000, observed total counts = 39409.000000
[Sun Mar 11 16:12:25 2012] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Mar 11 16:12:25 2012] Spatial fit model total counts = 23733.800000, observed total counts = 18913.000000
[Sun Mar 11 16:12:25 2012] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Mar 11 16:12:25 2012] Warning, spatial fit 12 centroid is now closest to src. 12
[Sun Mar 11 16:12:25 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 16:12:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 16:12:25 2012] Assessing source extent using major
[Sun Mar 11 16:12:25 2012] Source does appear to be extended
[Sun Mar 11 16:12:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 11 16:12:26 2012] Source is confused with source 40
[Sun Mar 11 16:13:44 2012] XMMSAS src. selection expression = ellipse(24832.456573, 22435.283722, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Mar 11 16:13:44 2012] Writing source region out to fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src17_src.reg
[Sun Mar 11 16:13:44 2012] Extracting stamp from image fullrun_pn_xmm0412990201_pi300-10000_cl_sm2.00.img.gz, (248, 221) - (323, 296)
[Sun Mar 11 16:13:44 2012] XMMSAS bgd. selection expression = annulus(24832.456573, 22435.283722, 1087.500000, 2175.000000, X, Y) && !ellipse(23093.646000, 24700.392000, 1214.768035, 1214.768035, 0.000000, X, Y) && !ellipse(24334.312000, 24588.684000, 1171.144034, 1171.144034, 0.000000, X, Y) && !ellipse(26003.621857, 23663.964905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25085.841949, 23477.480957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24420.164000, 23352.518000, 1216.688035, 1216.688035, 0.000000, X, Y) && !ellipse(23955.301270, 22391.526184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22780.268000, 25187.704000, 2429.536070, 2429.536070, 0.000000, X, Y) && !ellipse(23730.758000, 24917.192000, 1204.648035, 1204.648035, 0.000000, X, Y) && !ellipse(23064.868000, 25509.182000, 2230.824064, 1185.344034, 223.945000, X, Y) && !ellipse(23568.354645, 24401.805511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24902.668400, 24255.636400, 1159.600033, 1159.600033, 0.000000, X, Y) && !ellipse(23690.452720, 23936.058600, 1223.704035, 1223.704035, 0.000000, X, Y) && !ellipse(23951.206000, 23736.002000, 3478.800100, 3478.800100, 0.000000, X, Y) && !ellipse(25800.766000, 22259.256000, 2217.848064, 2217.848064, 0.000000, X, Y) && !ellipse(26575.438171, 22657.374268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27375.990570, 22298.616089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26798.214000, 21525.422000, 1230.736035, 1230.736035, 0.000000, X, Y) && !ellipse(26551.534000, 21818.590000, 966.264028, 264.469608, 89.901000, X, Y) && !ellipse(25578.936646, 20929.794495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26580.100000, 21443.604000, 1362.856039, 1362.856039, 0.000000, X, Y) && !ellipse(25426.386000, 23800.072000, 1159.600033, 1159.600033, 0.000000, X, Y) && !ellipse(27523.690000, 21022.888000, 2603.024075, 2603.024075, 0.000000, X, Y) && !ellipse(26505.478149, 20848.565201, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27701.454681, 19893.795425, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar 11 16:13:44 2012] Writing fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src17.gif
[Sun Mar 11 17:23:46 2012] Mean detx,y = (880.27, -1694.76) 
[Sun Mar 11 17:23:54 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 11 17:24:12 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 11 17:24:13 2012] Setting source spectrum file to fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sun Mar 11 17:24:13 2012] Setting bgd. spectrum file to fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Mon Mar 12 06:43:05 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Mar 12 06:43:05 2012] rmf not generated due to insufficient counts
[Fri Mar 16 22:36:04 2012] Updating aperture counts using extracted products
[Fri Mar 16 22:36:04 2012] Error reading totcts from fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Fri Mar 16 22:36:07 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 22:36:07 2012] Using photon index=1.80, rate=0.0285, arf fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src17.arf
[Fri Mar 16 22:36:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 22:36:07 2012] Updating source flux to 9.3e-14
[Fri Mar 16 22:56:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting