[Thu Mar  8 18:38:57 2012] Detection parameters:
  Position = (242.2, 198.1) = 8 49 9.07 -45 44 7.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 273.0 +/- 49.5
  Background counts = 1287.7
  Rate = 0.007 +/- 0.001

[Thu Mar  8 18:38:57 2012] Off-axis axis estimate = 8.34'
[Thu Mar  8 18:54:51 2012] Using EEF radius (= 10.60 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 18:54:51 2012] Initial guess for spatial extent in simple fitting = 10.60"
[Thu Mar  8 18:54:51 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.044
[Thu Mar  8 18:54:51 2012] Giving source the simple spatial ID 96 for pass 0, mean size = 10.60"
[Fri Mar  9 12:30:35 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src96.ximg exists
[Fri Mar  9 12:30:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src96.csv
[Fri Mar  9 12:30:35 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src96_1.ximg exists
[Fri Mar  9 12:30:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src96.csv
[Fri Mar  9 12:30:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src96_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_src96.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 12:30:37 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src96.ximg exists
[Fri Mar  9 12:30:37 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src96_1.ximg exists
[Fri Mar  9 12:30:37 2012] Fit fullrun_pn_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src96 appears to have run properly
[Sat Mar 10 02:13:55 2012] Spatial fit model total counts = 15665.000000, observed total counts = 15660.000000
[Sat Mar 10 02:13:55 2012] Offset between fit and detection position for source 109 = 0.797737 pixels
[Sat Mar 10 02:13:55 2012] Warning, changing simple spatial fit ID from 96 to 91
[Sat Mar 10 02:13:55 2012] 15795.320000 total counts/ 15271.700000 bgd. counts: snr = 4.237137
Spatial fit parameters:
  Offset between fit and detection position for source 109 = 0.797737 pixels
  Position = (243.0, 198.4) = 8 49 8.78 -45 44 5.2
  Extent = 20.4 (20.4-40.8)", rotation angle = 0
  Source counts = 523.6 +/- 125.7
  Background counts = 15271.7
  Rate = 0.009 +/- 0.002
[Sat Mar 10 02:13:55 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 02:13:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 02:13:55 2012] Assessing source extent using major axis lower bound
[Sat Mar 10 02:13:55 2012] Source does appear to be extended
[Sat Mar 10 02:13:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 02:13:55 2012] Source is confused with source 104
[Sat Mar 10 02:14:50 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Mar 10 02:14:50 2012] Initial guess for spatial extent in simple fitting = 20.42"
[Sat Mar 10 02:14:50 2012] source mask rpix=4.7, npix_max = 107, mask sum = 110, frac = 1.019
[Sat Mar 10 02:14:50 2012] Giving source the simple spatial ID 77 for pass 1, mean size = 20.42"
[Sat Mar 10 23:47:41 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src77.ximg exists
[Sat Mar 10 23:47:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src77.csv
[Sat Mar 10 23:47:41 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src77_1.ximg exists
[Sat Mar 10 23:47:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src77.csv
[Sat Mar 10 23:47:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src77_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 23:47:44 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src77.ximg exists
[Sat Mar 10 23:47:44 2012] fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src77_1.ximg exists
[Sat Mar 10 23:47:44 2012] Fit fullrun_pn_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src77 appears to have run properly
[Sun Mar 11 16:12:25 2012] Warning, spatial fit 77 centroid is now closest to src. 112
[Sun Mar 11 16:12:25 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 16:12:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 16:12:25 2012] Assessing source extent using major axis lower bound
[Sun Mar 11 16:12:25 2012] Source does appear to be extended
[Sun Mar 11 16:12:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 11 16:13:48 2012] XMMSAS src. selection expression = ellipse(21089.274000, 17212.734000, 1225.290035, 1225.290035, 0.000000, X, Y)
[Sun Mar 11 16:13:48 2012] Writing source region out to fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src109_src.reg
[Sun Mar 11 16:13:48 2012] Extracting stamp from image fullrun_pn_xmm0412990201_pi300-10000_cl_sm2.00.img.gz, (173, 128) - (313, 269)
[Sun Mar 11 16:13:48 2012] XMMSAS bgd. selection expression = annulus(21089.274000, 17212.734000, 2042.150059, 4084.300118, X, Y) && !ellipse(22764.626831, 15008.858795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23951.206000, 23736.002000, 3478.800100, 3478.800100, 0.000000, X, Y) && !ellipse(25800.766000, 22259.256000, 2217.848064, 2217.848064, 0.000000, X, Y) && !ellipse(25578.936646, 20929.794495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27523.690000, 21022.888000, 2603.024075, 2603.024075, 0.000000, X, Y) && !ellipse(21637.560257, 19756.527756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21575.968000, 19292.968000, 956.656028, 956.656028, 0.000000, X, Y) && !ellipse(21237.522600, 19064.684000, 789.601623, 789.601623, 0.000000, X, Y) && !ellipse(21998.078000, 18425.142000, 1589.952046, 1589.952046, 0.000000, X, Y) && !ellipse(22047.983800, 12233.176000, 1509.216043, 1509.216043, 0.000000, X, Y) && !ellipse(24465.908800, 16365.482000, 2927.464084, 2927.464084, 0.000000, X, Y) && !ellipse(22457.101800, 13187.810800, 886.896026, 886.896026, 0.000000, X, Y)
[Sun Mar 11 16:13:48 2012] Writing fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src109.gif
[Sun Mar 11 22:21:19 2012] Mean detx,y = (5694.60, -5783.47) 
[Sun Mar 11 22:21:29 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 11 22:22:22 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 11 22:22:22 2012] Setting source spectrum file to fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src109_src_b10.pi.gz
[Sun Mar 11 22:22:22 2012] Setting bgd. spectrum file to fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src109_bgd.pi.gz
[Fri Mar 16 22:36:06 2012] Updating aperture counts using extracted products
[Fri Mar 16 22:36:06 2012] Error reading totcts from fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src109_src_b10.pi.gz
[Fri Mar 16 22:36:09 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 22:36:09 2012] Using photon index=1.80, rate=0.00858, arf fullrun_pn_xmm0412990201_pi300-10000_pass1_cl_src109.arf
[Fri Mar 16 22:36:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 22:36:09 2012] Updating source flux to 2.7e-14
[Fri Mar 16 22:56:53 2012] Flag c found in src. 109 procflags, skipping spectral fitting