[Thu Mar  8 18:40:56 2012] Detection parameters:
  Position = (351.2, 211.0) = 8 48 23.80 -45 43 0.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 133.1 +/- 21.0
  Background counts = 228.1
  Rate = 0.004 +/- 0.0007

[Thu Mar  8 18:40:56 2012] Off-axis axis estimate = 7.41'
[Fri Mar  9 20:36:01 2012] Using EEF radius (= 10.13 ")to estimate initial spatial extent for simple fitting
[Fri Mar  9 20:36:01 2012] Initial guess for spatial extent in simple fitting = 10.13"
[Fri Mar  9 20:36:01 2012] source mask rpix=2.3, npix_max = 32, mask sum = 34, frac = 1.062
[Fri Mar  9 20:36:01 2012] Giving source the simple spatial ID 46 for pass 0, mean size = 10.13"
[Sat Mar 10 02:13:29 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src46.ximg exists
[Sat Mar 10 02:13:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src46.csv
[Sat Mar 10 02:13:29 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src46_1.ximg exists
[Sat Mar 10 02:13:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src46.csv
[Sat Mar 10 02:13:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 02:13:30 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src46.ximg exists
[Sat Mar 10 02:13:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src46.csv
[Sat Mar 10 02:13:30 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src46_1.ximg exists
[Sat Mar 10 02:13:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src46.csv
[Sat Mar 10 02:13:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 02:14:27 2012] Spatial fit model total counts = 2840.560000, observed total counts = 2246.000000
[Sat Mar 10 02:14:27 2012] Poor agreement between spatial fit and data for source 72
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Mar 10 02:14:27 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 02:14:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 02:14:27 2012] Assessing source extent using major
[Sat Mar 10 02:14:27 2012] Source does appear to be extended
[Sat Mar 10 02:14:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 02:14:27 2012] Source is confused with source 69
[Sun Mar 11 07:03:15 2012] Using EEF radius (= 10.13 ")to estimate initial spatial extent for simple fitting
[Sun Mar 11 07:03:15 2012] Initial guess for spatial extent in simple fitting = 10.13"
[Sun Mar 11 07:03:15 2012] source mask rpix=2.3, npix_max = 32, mask sum = 34, frac = 1.062
[Sun Mar 11 07:03:15 2012] Giving source the simple spatial ID 42 for pass 1, mean size = 10.13"
[Sun Mar 11 16:11:52 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_src42.ximg exists
[Sun Mar 11 16:11:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_src42.csv
[Sun Mar 11 16:11:52 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_src42_1.ximg exists
[Sun Mar 11 16:11:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_src42.csv
[Sun Mar 11 16:11:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 16:11:54 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src42.ximg exists
[Sun Mar 11 16:11:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src42.csv
[Sun Mar 11 16:11:54 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists
[Sun Mar 11 16:11:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src42.csv
[Sun Mar 11 16:11:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 16:13:08 2012] Spatial fit model total counts = 2881.210000, observed total counts = 2246.000000
[Sun Mar 11 16:13:08 2012] Poor agreement between spatial fit and data for source 72
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Mar 11 16:13:08 2012] Spatial fit model total counts = 5014.890000, observed total counts = 4697.000000
[Sun Mar 11 16:13:08 2012] Offset between fit and detection position for source 72 = 3.223684 pixels
[Sun Mar 11 16:13:08 2012] Warning, changing simple spatial fit ID from 42 to 44
[Sun Mar 11 16:13:08 2012] 4956.300000 total counts/ 3968.370000 bgd. counts: snr = 15.682673
Spatial fit parameters:
  Offset between fit and detection position for source 72 = 3.223684 pixels
  Position = (353.7, 208.9) = 8 48 22.76 -45 43 19.3
  Extent = 32.9 (32.2-65.8)" x 14.4 (11.4-17.9)", rotation angle = 40 (34-49) degrees
  Source counts = 987.9 +/- 70.4
  Background counts = 3968.4
  Rate = 0.02 +/- 0.001
[Sun Mar 11 16:13:08 2012] Spatial fit model total counts = 9453.120000, observed total counts = 8707.000000
[Sun Mar 11 16:13:08 2012] Offset between fit and detection position for source 72 = 0.939869 pixels
[Sun Mar 11 16:13:08 2012] Warning, changing simple spatial fit ID from 44 to 47
[Sun Mar 11 16:13:08 2012] 8652.720000 total counts/ 6291.210000 bgd. counts: snr = 29.773007
Spatial fit parameters:
  Offset between fit and detection position for source 72 = 0.939869 pixels
  Position = (352.8, 209.0) = 8 48 23.15 -45 43 19.0
  Extent = 38.1 (38.1-76.3)", rotation angle = 0
  Source counts = 2361.5 +/- 93.0
  Background counts = 6291.2
  Rate = 0.04 +/- 0.001
[Sun Mar 11 16:13:08 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 16:13:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 16:13:08 2012] Assessing source extent using major axis lower bound
[Sun Mar 11 16:13:08 2012] Source does appear to be extended
[Sun Mar 11 16:13:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 06:48:23 2012] Counts = 2361.510000, rescaling region sizes by 2.000000
[Fri Mar 16 06:48:23 2012] XMMSAS src. selection expression = ellipse(30645.168000, 18137.596000, 4576.152132, 4576.152132, 0.000000, X, Y)
[Fri Mar 16 06:48:23 2012] Writing source region out to fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src72_src.reg
[Fri Mar 16 06:48:23 2012] Extracting stamp from image fullrun_mos2_xmm0412990201_pi300-10000_cl_sm2.00.img.gz, (90, 0) - (595, 472)
[Fri Mar 16 06:48:23 2012] XMMSAS bgd. selection expression = annulus(30645.168000, 18137.596000, 15253.840439, 30507.680878, X, Y) && !ellipse(25144.486237, 22841.378418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24583.436066, 23004.312256, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23747.900800, 24170.566600, 586.077617, 586.077617, 0.000000, X, Y) && !ellipse(22763.084259, 15019.614319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24744.330841, 22582.021881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24136.379578, 24567.062500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25074.028000, 24179.718000, 663.524819, 663.524819, 0.000000, X, Y) && !ellipse(24074.344818, 23706.955139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28217.840000, 20967.030400, 881.720025, 881.720025, 0.000000, X, Y) && !ellipse(22805.158000, 25748.344000, 1221.920035, 1221.920035, 0.000000, X, Y) && !ellipse(23088.383759, 25268.454865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25450.252686, 22068.373276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22367.854000, 25992.044000, 2659.824077, 2659.824077, 0.000000, X, Y) && !ellipse(25284.305389, 23352.232605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28358.400000, 20942.562000, 1328.880038, 1328.880038, 0.000000, X, Y) && !ellipse(27506.486000, 21673.318000, 2657.760076, 2657.760076, 0.000000, X, Y) && !ellipse(20942.743000, 26208.964400, 634.037618, 634.037618, 0.000000, X, Y) && !ellipse(19298.021000, 27429.934000, 1434.184041, 1434.184041, 0.000000, X, Y) && !ellipse(9838.274400, 20047.843800, 359.800810, 359.800810, 0.000000, X, Y) && !ellipse(20509.128000, 26443.772000, 1408.304041, 1408.304041, 0.000000, X, Y) && !ellipse(21194.720000, 26103.841800, 1305.920038, 1305.920038, 0.000000, X, Y) && !ellipse(22624.898000, 25817.996000, 1276.728037, 1276.728037, 0.000000, X, Y) && !ellipse(18312.178000, 28432.212000, 2127.272061, 2127.272061, 0.000000, X, Y) && !ellipse(28451.524000, 20431.058000, 1473.000042, 1473.000042, 0.000000, X, Y) && !ellipse(21918.570000, 26362.752000, 2443.840070, 2443.840070, 0.000000, X, Y) && !ellipse(17096.768000, 25117.132000, 1638.808047, 1638.808047, 0.000000, X, Y) && !ellipse(19625.114000, 27518.848000, 1415.000041, 1415.000041, 0.000000, X, Y) && !ellipse(16790.736000, 25544.544000, 1617.992047, 1617.992047, 0.000000, X, Y) && !ellipse(27905.695702, 21046.002978, 2946.000085, 1735.822332, 41.342428, X, Y) && !ellipse(20425.514000, 26578.280000, 2611.840075, 2611.840075, 0.000000, X, Y) && !ellipse(25375.200317, 23788.087524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30140.162000, 19069.656000, 1541.048044, 1541.048044, 0.000000, X, Y) && !ellipse(29381.748000, 19647.248000, 3082.096089, 1497.408043, 45.703000, X, Y) && !ellipse(25930.710000, 23661.323200, 1194.672034, 545.907216, 31.673000, X, Y) && !ellipse(21863.224000, 26607.158000, 2553.456073, 1945.928056, 64.167000, X, Y) && !ellipse(24324.448578, 31155.483185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26852.628540, 21542.502243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11074.464470, 32068.083130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16169.372000, 26283.442000, 1714.040049, 1714.040049, 0.000000, X, Y) && !ellipse(27886.969960, 29272.787600, 332.296010, 332.296010, 0.000000, X, Y) && !ellipse(18032.280249, 28391.984631, 2659.824077, 2182.580287, 90.063123, X, Y) && !ellipse(31261.636000, 17424.910000, 3565.920103, 3565.920103, 0.000000, X, Y) && !ellipse(17779.400452, 27788.513092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28180.945007, 32252.339508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29695.150000, 19262.952000, 3000.144086, 3000.144086, 0.000000, X, Y) && !ellipse(26853.520630, 21006.970886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17038.620247, 29016.893819, 2631.861980, 2113.987388, 6.136940, X, Y) && !ellipse(16045.442000, 26371.374000, 3277.824094, 3277.824094, 0.000000, X, Y) && !ellipse(16381.160000, 26144.772000, 1677.632048, 1677.632048, 0.000000, X, Y) && !ellipse(17002.276000, 25306.478000, 3428.080099, 1332.664038, 55.282000, X, Y) && !ellipse(26024.755890, 20940.711975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20894.088333, 40541.032990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17929.832000, 24113.148000, 1590.688046, 1590.688046, 0.000000, X, Y) && !ellipse(21587.171000, 19162.666000, 1581.936046, 1581.936046, 0.000000, X, Y) && !ellipse(26933.723755, 20587.182877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21435.334800, 24974.158600, 693.828020, 693.828020, 0.000000, X, Y) && !ellipse(21889.135000, 18909.162000, 1542.784044, 1542.784044, 0.000000, X, Y) && !ellipse(10641.737175, 32662.870758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11313.768234, 16604.553970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32381.002000, 16727.812000, 1782.960051, 1782.960051, 0.000000, X, Y)
[Fri Mar 16 06:48:23 2012] Writing fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src72.gif
[Fri Mar 16 08:25:59 2012] Mean detx,y = (3453.01, 6586.38) 
[Fri Mar 16 08:26:03 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 16 08:35:31 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 16 08:35:32 2012] Setting source spectrum file to fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src72_src_b10.pi.gz
[Fri Mar 16 08:35:32 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src72_bgd.pi.gz
[Fri Mar 16 22:36:15 2012] Updating aperture counts using extracted products
[Fri Mar 16 22:36:15 2012] Error reading totcts from fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src72_src_b10.pi.gz
[Fri Mar 16 22:36:17 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 22:36:17 2012] Using photon index=1.80, rate=0.0377, arf fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src72.arf
[Fri Mar 16 22:36:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 22:36:17 2012] Updating source flux to 5.2e-13
[Fri Mar 16 22:46:31 2012] Flag p found in src. 72 procflags, skipping spectral fitting
[Fri Mar 16 22:46:31 2012] Flag c found in src. 72 procflags, skipping spectral fitting