[Thu Mar  8 18:40:55 2012] Detection parameters:
  Position = (325.9, 239.9) = 8 48 34.32 -45 41 7.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 367.0 +/- 34.9
  Background counts = 315.7
  Rate = 0.007 +/- 0.0007

[Thu Mar  8 18:40:56 2012] Off-axis axis estimate = 4.69'
[Fri Mar  9 20:36:01 2012] Using EEF radius (= 8.77 ")to estimate initial spatial extent for simple fitting
[Fri Mar  9 20:36:01 2012] Initial guess for spatial extent in simple fitting = 8.77"
[Fri Mar  9 20:36:01 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.987
[Fri Mar  9 20:36:01 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 8.77"
[Sat Mar 10 02:13:28 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src18.ximg exists
[Sat Mar 10 02:13:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src18.csv
[Sat Mar 10 02:13:28 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src18_1.ximg exists
[Sat Mar 10 02:13:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src18.csv
[Sat Mar 10 02:13:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 02:13:30 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Sat Mar 10 02:13:30 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Sat Mar 10 02:13:30 2012] Fit fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Sat Mar 10 02:14:27 2012] Spatial fit model total counts = 5000.220000, observed total counts = 5063.000000
[Sat Mar 10 02:14:27 2012] Offset between fit and detection position for source 63 = 1.462619 pixels
[Sat Mar 10 02:14:27 2012] Warning, changing simple spatial fit ID from 18 to 10
[Sat Mar 10 02:14:27 2012] 4900.108000 total counts/ 4387.120000 bgd. counts: snr = 7.744929
Spatial fit parameters:
  Offset between fit and detection position for source 63 = 1.462619 pixels
  Position = (326.5, 241.3) = 8 48 34.07 -45 40 58.8
  Extent = 16.6 (15.9-17.0)", rotation angle = 0
  Source counts = 513.0 +/- 70.0
  Background counts = 4387.1
  Rate = 0.008 +/- 0.001
[Sat Mar 10 02:14:27 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 02:14:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 02:14:27 2012] Assessing source extent using major axis lower bound
[Sat Mar 10 02:14:27 2012] Source does appear to be extended
[Sat Mar 10 02:14:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 02:14:27 2012] Source is confused with source 57
[Sun Mar 11 07:03:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar 11 07:03:15 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Mar 11 07:03:15 2012] Initial guess for spatial extent in simple fitting = 16.61"
[Sun Mar 11 07:03:15 2012] source mask rpix=3.8, npix_max = 74, mask sum = 81, frac = 1.086
[Sun Mar 11 07:03:15 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 16.61"
[Sun Mar 11 16:11:51 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_src15.ximg exists
[Sun Mar 11 16:11:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_src15.csv
[Sun Mar 11 16:11:51 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_src15_1.ximg exists
[Sun Mar 11 16:11:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_src15.csv
[Sun Mar 11 16:11:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 16:11:53 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sun Mar 11 16:11:53 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sun Mar 11 16:11:53 2012] Fit fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Sun Mar 11 16:13:08 2012] Warning, spatial fit 15 centroid is now closest to src. 52
[Sun Mar 11 16:13:08 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 16:13:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 16:13:08 2012] Assessing source extent using major axis lower bound
[Sun Mar 11 16:13:08 2012] Source does appear to be extended
[Sun Mar 11 16:13:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 06:48:21 2012] XMMSAS src. selection expression = ellipse(28358.400000, 20942.562000, 996.660029, 996.660029, 0.000000, X, Y)
[Fri Mar 16 06:48:21 2012] Writing source region out to fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src63_src.reg
[Fri Mar 16 06:48:21 2012] Extracting stamp from image fullrun_mos2_xmm0412990201_pi300-10000_cl_sm2.00.img.gz, (269, 184) - (384, 299)
[Fri Mar 16 06:48:21 2012] XMMSAS bgd. selection expression = annulus(28358.400000, 20942.562000, 1661.100048, 3322.200096, X, Y) && !ellipse(25144.486237, 22841.378418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24583.436066, 23004.312256, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24744.330841, 22582.021881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25074.028000, 24179.718000, 663.524819, 663.524819, 0.000000, X, Y) && !ellipse(28217.840000, 20967.030400, 881.720025, 881.720025, 0.000000, X, Y) && !ellipse(25450.252686, 22068.373276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25284.305389, 23352.232605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27506.486000, 21673.318000, 2657.760076, 2657.760076, 0.000000, X, Y) && !ellipse(28451.524000, 20431.058000, 1473.000042, 1473.000042, 0.000000, X, Y) && !ellipse(27905.695702, 21046.002978, 2946.000085, 1735.822332, 41.342428, X, Y) && !ellipse(25375.200317, 23788.087524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30140.162000, 19069.656000, 1541.048044, 1541.048044, 0.000000, X, Y) && !ellipse(29381.748000, 19647.248000, 3082.096089, 1497.408043, 45.703000, X, Y) && !ellipse(25930.710000, 23661.323200, 1194.672034, 545.907216, 31.673000, X, Y) && !ellipse(26852.628540, 21542.502243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30645.168000, 18137.596000, 3050.768088, 3050.768088, 0.000000, X, Y) && !ellipse(31261.636000, 17424.910000, 3565.920103, 3565.920103, 0.000000, X, Y) && !ellipse(29695.150000, 19262.952000, 3000.144086, 3000.144086, 0.000000, X, Y) && !ellipse(26853.520630, 21006.970886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26024.755890, 20940.711975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26933.723755, 20587.182877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32381.002000, 16727.812000, 1782.960051, 1782.960051, 0.000000, X, Y)
[Fri Mar 16 06:48:21 2012] Writing fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src63.gif
[Fri Mar 16 07:05:43 2012] Mean detx,y = (2321.32, 3798.11) 
[Fri Mar 16 07:05:46 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 16 07:06:00 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 16 07:06:00 2012] Setting source spectrum file to fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Fri Mar 16 07:06:00 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src63_bgd.pi.gz
[Fri Mar 16 22:36:14 2012] Updating aperture counts using extracted products
[Fri Mar 16 22:36:14 2012] Error reading totcts from fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Fri Mar 16 22:36:16 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 22:36:16 2012] Using photon index=1.80, rate=0.0082, arf fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src63.arf
[Fri Mar 16 22:36:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 22:36:16 2012] Updating source flux to 9.6e-14
[Fri Mar 16 22:46:31 2012] Flag c found in src. 63 procflags, skipping spectral fitting