[Thu Mar  8 18:40:55 2012] Detection parameters:
  Position = (309.2, 248.2) = 8 48 41.26 -45 40 28.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 258.8 +/- 33.9
  Background counts = 367.9
  Rate = 0.005 +/- 0.0006

[Thu Mar  8 18:40:56 2012] Off-axis axis estimate = 3.73'
[Fri Mar  9 20:36:01 2012] Using EEF radius (= 8.29 ")to estimate initial spatial extent for simple fitting
[Fri Mar  9 20:36:01 2012] Initial guess for spatial extent in simple fitting = 8.29"
[Fri Mar  9 20:36:01 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.079
[Fri Mar  9 20:36:01 2012] Giving source the simple spatial ID 41 for pass 0, mean size = 8.29"
[Sat Mar 10 02:13:29 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src41.ximg exists
[Sat Mar 10 02:13:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src41.csv
[Sat Mar 10 02:13:29 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src41_1.ximg exists
[Sat Mar 10 02:13:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src41.csv
[Sat Mar 10 02:13:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 02:13:30 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Sat Mar 10 02:13:30 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Sat Mar 10 02:13:30 2012] Fit fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src41 appears to have run properly
[Sat Mar 10 02:14:27 2012] Warning, spatial fit 41 centroid is now closest to src. 58
[Sat Mar 10 02:14:27 2012] Source 56 is offset by 4.802144 and -1.120135 pixels which is larger than
2 X fitted extent = 2.309940 x 2.309940, not incorporating fit results
[Sat Mar 10 02:14:27 2012] Source 56 is offset by 4.839156 and -1.618434 pixels which is larger than
2 X fitted extent = 1.893816 x 6.974529, not incorporating fit results
[Sat Mar 10 02:14:27 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 02:14:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 02:14:27 2012] Assessing source extent using major
[Sat Mar 10 02:14:27 2012] Source does appear to be extended
[Sat Mar 10 02:14:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 02:14:27 2012] Source is confused with source 59
[Sun Mar 11 07:03:15 2012] Using EEF radius (= 8.29 ")to estimate initial spatial extent for simple fitting
[Sun Mar 11 07:03:15 2012] Initial guess for spatial extent in simple fitting = 8.29"
[Sun Mar 11 07:03:15 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.079
[Sun Mar 11 07:03:15 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 8.29"
[Sun Mar 11 16:11:52 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_src37.ximg exists
[Sun Mar 11 16:11:52 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_src37_1.ximg exists
[Sun Mar 11 16:11:52 2012] Fit fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_src37 appears to have run properly
[Sun Mar 11 16:11:54 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Sun Mar 11 16:11:54 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Sun Mar 11 16:11:54 2012] Fit fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Sun Mar 11 16:13:08 2012] Source 56 is offset by 4.748673 and -2.019209 pixels which is larger than
2 X fitted extent = 2.765421 x 2.765421, not incorporating fit results
[Sun Mar 11 16:13:08 2012] Source 56 is offset by 4.819064 and -1.064572 pixels which is larger than
2 X fitted extent = 2.087761 x 2.087761, not incorporating fit results
[Sun Mar 11 16:13:08 2012] Source 56 is offset by 5.136719 and -1.561101 pixels which is larger than
2 X fitted extent = 1.919338 x 1.919338, not incorporating fit results
[Sun Mar 11 16:13:08 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 16:13:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 16:13:08 2012] Assessing source extent using major
[Sun Mar 11 16:13:08 2012] Source does appear to be extended
[Sun Mar 11 16:13:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 06:48:23 2012] XMMSAS src. selection expression = ellipse(26852.628540, 21542.502243, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar 16 06:48:23 2012] Writing source region out to fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src56_src.reg
[Fri Mar 16 06:48:23 2012] Extracting stamp from image fullrun_mos2_xmm0412990201_pi300-10000_cl_sm2.00.img.gz, (272, 211) - (347, 286)
[Fri Mar 16 06:48:23 2012] XMMSAS bgd. selection expression = annulus(26852.628540, 21542.502243, 1087.500000, 2175.000000, X, Y) && !ellipse(25144.486237, 22841.378418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24583.436066, 23004.312256, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24744.330841, 22582.021881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24136.379578, 24567.062500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25074.028000, 24179.718000, 663.524819, 663.524819, 0.000000, X, Y) && !ellipse(24074.344818, 23706.955139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28217.840000, 20967.030400, 881.720025, 881.720025, 0.000000, X, Y) && !ellipse(25450.252686, 22068.373276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22367.854000, 25992.044000, 2659.824077, 2659.824077, 0.000000, X, Y) && !ellipse(25284.305389, 23352.232605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28358.400000, 20942.562000, 1328.880038, 1328.880038, 0.000000, X, Y) && !ellipse(27506.486000, 21673.318000, 2657.760076, 2657.760076, 0.000000, X, Y) && !ellipse(28451.524000, 20431.058000, 1473.000042, 1473.000042, 0.000000, X, Y) && !ellipse(27905.695702, 21046.002978, 2946.000085, 1735.822332, 41.342428, X, Y) && !ellipse(25375.200317, 23788.087524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30140.162000, 19069.656000, 1541.048044, 1541.048044, 0.000000, X, Y) && !ellipse(29381.748000, 19647.248000, 3082.096089, 1497.408043, 45.703000, X, Y) && !ellipse(25930.710000, 23661.323200, 1194.672034, 545.907216, 31.673000, X, Y) && !ellipse(30645.168000, 18137.596000, 3050.768088, 3050.768088, 0.000000, X, Y) && !ellipse(31261.636000, 17424.910000, 3565.920103, 3565.920103, 0.000000, X, Y) && !ellipse(29695.150000, 19262.952000, 3000.144086, 3000.144086, 0.000000, X, Y) && !ellipse(26853.520630, 21006.970886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26024.755890, 20940.711975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26933.723755, 20587.182877, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar 16 06:48:23 2012] Writing fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src56.gif
[Fri Mar 16 08:24:08 2012] Mean detx,y = (1060.57, 2828.25) 
[Fri Mar 16 08:24:09 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 16 08:24:22 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 16 08:24:23 2012] Setting source spectrum file to fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Fri Mar 16 08:24:23 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src56_bgd.pi.gz
[Fri Mar 16 21:13:00 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Mar 16 21:13:00 2012] rmf not generated due to insufficient counts
[Fri Mar 16 22:36:15 2012] Updating aperture counts using extracted products
[Fri Mar 16 22:36:15 2012] Error reading totcts from fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Fri Mar 16 22:36:17 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 22:36:17 2012] Using photon index=1.80, rate=0.00471, arf fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src56.arf
[Fri Mar 16 22:36:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 22:36:17 2012] Updating source flux to 5.6e-14
[Fri Mar 16 22:46:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting