[Thu Mar  8 18:40:54 2012] Detection parameters:
  Position = (285.5, 279.0) = 8 48 51.09 -45 38 13.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 519.0 +/- 45.8
  Background counts = 431.2
  Rate = 0.009 +/- 0.0008

[Thu Mar  8 18:40:56 2012] Off-axis axis estimate = 1.69'
[Fri Mar  9 20:36:01 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Fri Mar  9 20:36:01 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Fri Mar  9 20:36:01 2012] source mask rpix=1.7, npix_max = 18, mask sum = 12, frac = 0.636
[Fri Mar  9 20:36:01 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 7.27"
[Sat Mar 10 02:13:28 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src8.ximg exists
[Sat Mar 10 02:13:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src8.csv
[Sat Mar 10 02:13:28 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src8_1.ximg exists
[Sat Mar 10 02:13:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src8.csv
[Sat Mar 10 02:13:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 02:13:29 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sat Mar 10 02:13:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sat Mar 10 02:13:29 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sat Mar 10 02:13:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sat Mar 10 02:13:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 02:14:27 2012] Warning, spatial fit 8 centroid is now closest to src. 46
[Sat Mar 10 02:14:27 2012] Spatial fit model total counts = 6901.840000, observed total counts = 6465.000000
[Sat Mar 10 02:14:27 2012] Offset between fit and detection position for source 43 = 3.352943 pixels
[Sat Mar 10 02:14:27 2012] Warning, changing simple spatial fit ID from 8 to 35
[Sat Mar 10 02:14:27 2012] 6581.754000 total counts/ 6157.630000 bgd. counts: snr = 5.404880
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 3.352943 pixels
  Position = (288.8, 278.3) = 8 48 49.74 -45 38 18.0
  Extent = 14.7 (14.6-29.4)", rotation angle = 0
  Source counts = 424.1 +/- 81.1
  Background counts = 6157.6
  Rate = 0.007 +/- 0.001
[Sat Mar 10 02:14:27 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 02:14:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 02:14:27 2012] Assessing source extent using major axis lower bound
[Sat Mar 10 02:14:27 2012] Source does appear to be extended
[Sat Mar 10 02:14:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 02:14:27 2012] Source is confused with source 48
[Sat Mar 10 02:14:27 2012] Source is confused with source 46
[Sun Mar 11 07:03:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar 11 07:03:15 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Mar 11 07:03:15 2012] Initial guess for spatial extent in simple fitting = 14.69"
[Sun Mar 11 07:03:15 2012] source mask rpix=3.4, npix_max = 60, mask sum = 62, frac = 1.032
[Sun Mar 11 07:03:15 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 14.69"
[Sun Mar 11 16:11:51 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_src7.ximg exists
[Sun Mar 11 16:11:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_src7.csv
[Sun Mar 11 16:11:51 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_src7_1.ximg exists
[Sun Mar 11 16:11:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_src7.csv
[Sun Mar 11 16:11:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 16:11:53 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sun Mar 11 16:11:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src7.csv
[Sun Mar 11 16:11:53 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sun Mar 11 16:11:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src7.csv
[Sun Mar 11 16:11:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 16:13:08 2012] Source 43 is offset by 3.001315 and -3.102161 pixels which is larger than
2 X fitted extent = 2.683789 x 7.396046, not incorporating fit results
[Sun Mar 11 16:13:08 2012] Spatial fit model total counts = 6885.310000, observed total counts = 6465.000000
[Sun Mar 11 16:13:08 2012] Offset between fit and detection position for source 43 = 0.228155 pixels
[Sun Mar 11 16:13:08 2012] Warning, changing simple spatial fit ID from 7 to 31
[Sun Mar 11 16:13:08 2012] 6559.292000 total counts/ 6400.250000 bgd. counts: snr = 1.987986
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 0.228155 pixels
  Position = (288.8, 278.5) = 8 48 49.74 -45 38 17.0
  Extent = 8.3 (4.4-12.1)", rotation angle = 0
  Source counts = 159.0 +/- 81.0
  Background counts = 6400.2
  Rate = 0.003 +/- 0.001
[Sun Mar 11 16:13:08 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 16:13:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 16:13:08 2012] Assessing source extent using major axis lower bound
[Sun Mar 11 16:13:08 2012] Source does appear to be extended
[Sun Mar 11 16:13:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 06:48:20 2012] XMMSAS src. selection expression = ellipse(25074.028000, 24179.718000, 497.643614, 497.643614, 0.000000, X, Y)
[Fri Mar 16 06:48:20 2012] Writing source region out to fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src43_src.reg
[Fri Mar 16 06:48:20 2012] Extracting stamp from image fullrun_mos2_xmm0412990201_pi300-10000_cl_sm2.00.img.gz, (260, 250) - (317, 307)
[Fri Mar 16 06:48:20 2012] XMMSAS bgd. selection expression = annulus(25074.028000, 24179.718000, 829.406024, 1658.812048, X, Y) && !ellipse(25144.486237, 22841.378418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24583.436066, 23004.312256, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23747.900800, 24170.566600, 586.077617, 586.077617, 0.000000, X, Y) && !ellipse(24744.330841, 22582.021881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24136.379578, 24567.062500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24074.344818, 23706.955139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22805.158000, 25748.344000, 1221.920035, 1221.920035, 0.000000, X, Y) && !ellipse(23088.383759, 25268.454865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25450.252686, 22068.373276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22367.854000, 25992.044000, 2659.824077, 2659.824077, 0.000000, X, Y) && !ellipse(25284.305389, 23352.232605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27506.486000, 21673.318000, 2657.760076, 2657.760076, 0.000000, X, Y) && !ellipse(22624.898000, 25817.996000, 1276.728037, 1276.728037, 0.000000, X, Y) && !ellipse(21918.570000, 26362.752000, 2443.840070, 2443.840070, 0.000000, X, Y) && !ellipse(27905.695702, 21046.002978, 2946.000085, 1735.822332, 41.342428, X, Y) && !ellipse(25375.200317, 23788.087524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29381.748000, 19647.248000, 3082.096089, 1497.408043, 45.703000, X, Y) && !ellipse(25930.710000, 23661.323200, 1194.672034, 545.907216, 31.673000, X, Y) && !ellipse(21863.224000, 26607.158000, 2553.456073, 1945.928056, 64.167000, X, Y)
[Fri Mar 16 06:48:20 2012] Writing fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src43.gif
[Fri Mar 16 06:51:04 2012] Mean detx,y = (-58.00, -115.91) 
[Fri Mar 16 06:51:05 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 16 06:51:18 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 16 06:51:18 2012] Setting source spectrum file to fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Fri Mar 16 06:51:18 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Fri Mar 16 22:36:14 2012] Updating aperture counts using extracted products
[Fri Mar 16 22:36:14 2012] Error reading totcts from fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Fri Mar 16 22:36:16 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 22:36:16 2012] Using photon index=1.80, rate=0.00254, arf fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src43.arf
[Fri Mar 16 22:36:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 22:36:16 2012] Updating source flux to 2.6e-14
[Fri Mar 16 22:46:31 2012] Flag b found in src. 43 procflags, skipping spectral fitting
[Fri Mar 16 22:46:31 2012] Flag c found in src. 43 procflags, skipping spectral fitting