[Thu Mar  8 18:40:54 2012] Detection parameters:
  Position = (249.3, 290.1) = 8 49 6.12 -45 37 24.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 163.0 +/- 32.9
  Background counts = 444.6
  Rate = 0.003 +/- 0.0006

[Thu Mar  8 18:40:56 2012] Off-axis axis estimate = 3.62'
[Fri Mar  9 20:36:01 2012] Using EEF radius (= 8.24 ")to estimate initial spatial extent for simple fitting
[Fri Mar  9 20:36:01 2012] Initial guess for spatial extent in simple fitting = 8.24"
[Fri Mar  9 20:36:01 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.091
[Fri Mar  9 20:36:01 2012] Giving source the simple spatial ID 64 for pass 0, mean size = 8.24"
[Sat Mar 10 02:13:29 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src64.ximg exists
[Sat Mar 10 02:13:29 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src64_1.ximg exists
[Sat Mar 10 02:13:29 2012] Fit fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src64 appears to have run properly
[Sat Mar 10 02:13:31 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src64.ximg exists
[Sat Mar 10 02:13:31 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src64_1.ximg exists
[Sat Mar 10 02:13:31 2012] Fit fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src64 appears to have run properly
[Sat Mar 10 02:14:27 2012] Spatial fit model total counts = 5941.990000, observed total counts = 5942.000000
[Sat Mar 10 02:14:27 2012] Offset between fit and detection position for source 36 = 4.009322 pixels
[Sat Mar 10 02:14:27 2012] 5968.605000 total counts/ 5827.040000 bgd. counts: snr = 1.854522
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 4.009322 pixels
  Position = (246.3, 287.4) = 8 49 7.34 -45 37 38.1
  Extent = 7.8 (4.0-16.5)", rotation angle = 0
  Source counts = 141.6 +/- 77.3
  Background counts = 5827.0
  Rate = 0.002 +/- 0.001
[Sat Mar 10 02:14:27 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 02:14:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 02:14:27 2012] Assessing source extent using major axis lower bound
[Sat Mar 10 02:14:27 2012] Source does appear to be extended
[Sat Mar 10 02:14:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 11 07:03:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar 11 07:03:15 2012] Initial guess for spatial extent in simple fitting = 7.84"
[Sun Mar 11 07:03:15 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.178
[Sun Mar 11 07:03:15 2012] Giving source the simple spatial ID 58 for pass 1, mean size = 7.84"
[Sun Mar 11 16:11:52 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_src58.ximg exists
[Sun Mar 11 16:11:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_src58.csv
[Sun Mar 11 16:11:52 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_src58_1.ximg exists
[Sun Mar 11 16:11:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_src58.csv
[Sun Mar 11 16:11:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 16:11:55 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src58.ximg exists
[Sun Mar 11 16:11:55 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src58_1.ximg exists
[Sun Mar 11 16:11:55 2012] Fit fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src58 appears to have run properly
[Sun Mar 11 16:13:08 2012] Spatial fit model total counts = 5227.990000, observed total counts = 5224.000000
[Sun Mar 11 16:13:08 2012] Offset between fit and detection position for source 36 = 0.644728 pixels
[Sun Mar 11 16:13:08 2012] 5284.307000 total counts/ 5127.830000 bgd. counts: snr = 2.185162
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.644728 pixels
  Position = (246.9, 287.6) = 8 49 7.08 -45 37 37.1
  Extent = 8.7 (5.0-15.7)", rotation angle = 0
  Source counts = 156.5 +/- 72.7
  Background counts = 5127.8
  Rate = 0.003 +/- 0.001
[Sun Mar 11 16:13:08 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 16:13:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 16:13:08 2012] Assessing source extent using major axis lower bound
[Sun Mar 11 16:13:08 2012] Source does appear to be extended
[Sun Mar 11 16:13:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 11 16:13:08 2012] Source is confused with source 24
[Sun Mar 11 16:13:08 2012] Source is confused with source 23
[Sun Mar 11 16:13:08 2012] Source is confused with source 19
[Sun Mar 11 16:13:08 2012] Source is confused with source 33
[Fri Mar 16 06:48:24 2012] XMMSAS src. selection expression = ellipse(21435.334800, 24974.158600, 520.371015, 520.371015, 0.000000, X, Y)
[Fri Mar 16 06:48:24 2012] Writing source region out to fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src36_src.reg
[Fri Mar 16 06:48:24 2012] Extracting stamp from image fullrun_mos2_xmm0412990201_pi300-10000_cl_sm2.00.img.gz, (217, 258) - (277, 318)
[Fri Mar 16 06:48:24 2012] XMMSAS bgd. selection expression = annulus(21435.334800, 24974.158600, 867.285025, 1734.570050, X, Y) && !ellipse(23747.900800, 24170.566600, 586.077617, 586.077617, 0.000000, X, Y) && !ellipse(22805.158000, 25748.344000, 1221.920035, 1221.920035, 0.000000, X, Y) && !ellipse(23088.383759, 25268.454865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22367.854000, 25992.044000, 2659.824077, 2659.824077, 0.000000, X, Y) && !ellipse(20942.743000, 26208.964400, 634.037618, 634.037618, 0.000000, X, Y) && !ellipse(19298.021000, 27429.934000, 1434.184041, 1434.184041, 0.000000, X, Y) && !ellipse(20509.128000, 26443.772000, 1408.304041, 1408.304041, 0.000000, X, Y) && !ellipse(21194.720000, 26103.841800, 1305.920038, 1305.920038, 0.000000, X, Y) && !ellipse(22624.898000, 25817.996000, 1276.728037, 1276.728037, 0.000000, X, Y) && !ellipse(18312.178000, 28432.212000, 2127.272061, 2127.272061, 0.000000, X, Y) && !ellipse(21918.570000, 26362.752000, 2443.840070, 2443.840070, 0.000000, X, Y) && !ellipse(19625.114000, 27518.848000, 1415.000041, 1415.000041, 0.000000, X, Y) && !ellipse(20425.514000, 26578.280000, 2611.840075, 2611.840075, 0.000000, X, Y) && !ellipse(21863.224000, 26607.158000, 2553.456073, 1945.928056, 64.167000, X, Y) && !ellipse(18032.280249, 28391.984631, 2659.824077, 2182.580287, 90.063123, X, Y) && !ellipse(17002.276000, 25306.478000, 3428.080099, 1332.664038, 55.282000, X, Y)
[Fri Mar 16 06:48:24 2012] Writing fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src36.gif
[Fri Mar 16 09:39:58 2012] Mean detx,y = (-3382.46, -1759.43) 
[Fri Mar 16 09:39:59 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 16 09:40:11 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 16 09:40:12 2012] Setting source spectrum file to fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Fri Mar 16 09:40:12 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Fri Mar 16 22:36:16 2012] Updating aperture counts using extracted products
[Fri Mar 16 22:36:16 2012] Error reading totcts from fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Fri Mar 16 22:36:18 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 22:36:18 2012] Using photon index=1.80, rate=0.0025, arf fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src36.arf
[Fri Mar 16 22:36:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 22:36:18 2012] Updating source flux to 2.5e-14
[Fri Mar 16 22:46:31 2012] Flag c found in src. 36 procflags, skipping spectral fitting